Product Description
Product Description
Feature:
1. Leading power-cut braking technology. Motor is isolated from controller’s HV output circuit. Contact point is disconnected after stopping. No charged door body spontaneous combustion, fire and electric leakage hazards! Quiet, soft braking, more stable operation and safer braking;
2. There are only 2 connecting cables between motor reducer and electric box. Simple installation and wiring on site;
3. Absolute value encoder or mechanical limit switch can be selected
4. Controller adopts IPM intelligent module with compact structure and has stronger functionalities.
5. It has inching/manual/automatic, fully open/partially open, single button, adjustable light ineffective position, interlocking, double-door interlocking automatic door opening, air curtain machine control, door opening in place, door closing in place, fault output, RS485 Internet of Things remote control functionalities;
6. Unified installation dimensions 220V/0.75KW, 1.5KW and 2.2KW
7. Simple and friendly operation interface, convenient debugging and maintenance;
8. Real-time monitoring on signal and alarm, and one-key to restore factory preset value.
The DM400 series products include a set of servo control boxes, servo motors, and absolute encoders, which are used to support the control of PVC fast rolling shutter doors, stacking doors, hard fast rolling doors, sliding doors and other industrial categories.Plug and play, stable performance, friendly interface for control parameters, powerful functions, easy to debug and maintain.
IPM intelligent power module design
The control box adopts the leading IPM intelligent power module design, the structure is clean and compact, and only 2 cables are connected between the control box and the motor, plug and play.
Servo control box panel
Control Box Specfication
|
Model |
DM400 |
DM401 |
DM402 |
|
Rated power |
0.75kw |
1.5kw |
2.2kw |
|
Shell size (Length x Heightx Depth) |
250 x 400 x 130 mm |
||
|
Power supply voltage |
Single-phase AC220V~240V 50~60Hz |
||
|
Control voltage |
DC24V, Max. current 400 mA |
||
|
Position control |
Absolute value encoder or mechanical limit switch |
||
|
Overload capacity |
150% rated current for 1 minute |
||
|
Operating ambient temperature |
-10~50ºC |
||
|
Place of use |
Free from oil mist, dust, corrosive or flammable gas,etc. |
||
|
Weight |
6Kg |
||
Motor specification
|
Motor model |
DM-2430 |
DM-4030 |
DM-6030 |
|
Rated power |
0.75KW |
1.5KW |
2.2KW |
|
Rated current |
3A |
5A |
6A |
|
Lifting weight |
50KG |
100KG |
150KG |
|
Applicable door size |
10M² |
30M² |
50M² |
|
Rated voltage |
AC220V |
||
|
Insulation grade |
F |
||
|
Operating ambient temperature |
-40~+50ºC |
||
|
Protection grade |
IP54 |
||
0.75KW Servo Motor Size Drawing
1.5KW Servo Motor Size Drawing
Absolute value encoder
For More Details Of Product Specifications,
Please Click here contact us for updated size drawing if you have other different parameter needed. Thanks
Company Profile
DMKE motor was founded in China, HangZhou city,Xihu (West Lake) Dis. district, in 2009. After 12 years’ creativity and development, we became 1 of the leading high-tech companies in China in dc motor industry.
We specialize in high precision micro dc gear motors, brushless motors, brushless controllers, dc servo motors, dc servo controllers etc. And we produce brushless dc motor and controller with wide power range from 5 watt to 20 kilowatt; also dc servo motor power range from 50 watt to 10 kilowatt. They are widely used in automatic guided vehicle , robots, lifting equipment,cleaning machine, medical equipment, packing machinery, and many other industrial automatic equipments.
With a plant area of 4000 square meters, we have built our own supply chain with high quality control standard and passed ISO9001 certificate of quality system.
With more than 10 engineers for brushless dc motor and controllers’ research and development, we own strong independent design and development capability. Custom-made motors and controllers are widely accepted by us. At the same time, we have engineers who can speak fluent English. That makes we can supply intime after-sales support and guidance smoothly for our customers.
Our motors are exported worldwide, and over 80% motors are exported to Europe, the United States, Saudi Arabia, Australia, Korea etc. We are looking CHINAMFG to establishing long-term business relationship together with you for mutual business success.
FAQ
Q1: What kind motors you can provide?
A1: For now, we mainly provide permanent magnet brushless dc motor, dc gear motor, micro dc motor, planetary gear motor, dc servo motor, brush dc motors, with diameter range from 16 to 220mm,and power range from 5W to 20KW.
Q2: Is there a MOQ for your motors?
A2: No. we can accept 1 pcs for sample making for your testing,and the price for sample making will have 10% to 30% difference than bulk price based on different style.
Q3: Could you send me a price list?
A3: For all of our motors, they are customized based on different requirements like power, voltage, gear ratio, rated torque and shaft diameter etc. The price also varies according to different order qty. So it’s difficult for us to provide a price list.
If you can share your detailed specification and order qty, we’ll see what offer we can provide.
Q4: Are you motors reversible?
A4: Yes, nearly all dc and ac motor are reversible. We have technical people who can teach how to get the function by different wire connection.
Q5: Is it possible for you to develop new motors if we provide the tooling cost?
A5: Yes. Please kindly share the detailed requirements like performance, size, annual quantity, target price etc. Then we’ll make our evaluation to see if we can arrange or not.
Q6:How about your delivery time?
A6: For micro brush dc gear motor, the sample delivery time is 2-5 days, bulk delivery time is about 15-20 days, depends on the order qty.
For brushless dc motor, the sample deliver time is about 10-15 days; bulk time is 15-20 days.
Pleasecontact us for final reference.
Q7:What’s your warranty terms?
A6: One year
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Warranty: | 13 Months |
|---|---|
| Electric Current Type: | AC |
| Brand: | Dmke |
| Motor Type: | Worm Gear Servo Motor |
| Rated Power: | 0.75kw |
| Rated Voltage: | DC48V |
| Samples: |
US$ 547.2/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
Are there environmental considerations associated with the use of AC motors?
Yes, there are several environmental considerations associated with the use of AC motors. These considerations are primarily related to energy consumption, greenhouse gas emissions, and the disposal of motors at the end of their life cycle. Let’s explore these environmental considerations in detail:
- Energy Efficiency: AC motors can have varying levels of energy efficiency, which directly impacts their environmental impact. Motors with higher efficiency convert a larger percentage of electrical energy into useful mechanical work, resulting in reduced energy consumption. By selecting and using high-efficiency AC motors, energy usage can be minimized, leading to lower greenhouse gas emissions and reduced reliance on fossil fuels for electricity generation.
- Greenhouse Gas Emissions: The electricity consumed by AC motors is often produced by power plants that burn fossil fuels, such as coal, natural gas, or oil. The generation of electricity from these fossil fuels releases greenhouse gases, contributing to climate change. By employing energy-efficient motors and optimizing motor systems, businesses and individuals can reduce their electricity demand, leading to lower greenhouse gas emissions and a smaller carbon footprint.
- Motor Disposal and Recycling: AC motors contain various materials, including metals, plastics, and electrical components. At the end of their life cycle, proper disposal or recycling is important to minimize their environmental impact. Some components, such as copper windings and steel casings, can be recycled, reducing the need for new raw materials and energy-intensive manufacturing processes. It is crucial to follow local regulations and guidelines for the disposal and recycling of motors to prevent environmental pollution and promote resource conservation.
- Manufacturing and Production: The manufacturing and production processes associated with AC motors can have environmental implications. The extraction and processing of raw materials, such as metals and plastics, can result in habitat destruction, energy consumption, and greenhouse gas emissions. Additionally, the manufacturing processes themselves can generate waste and pollutants. Motor manufacturers can mitigate these environmental impacts by adopting sustainable practices, using recycled materials, reducing waste generation, and implementing energy-efficient production methods.
- Life Cycle Assessment: Conducting a life cycle assessment (LCA) of AC motors can provide a holistic view of their environmental impact. An LCA considers the environmental aspects associated with the entire life cycle of the motor, including raw material extraction, manufacturing, transportation, use, and end-of-life disposal or recycling. By analyzing the different stages of the motor’s life cycle, stakeholders can identify opportunities for improvement, such as optimizing energy efficiency, reducing emissions, and implementing sustainable practices.
To address these environmental considerations, governments, organizations, and industry standards bodies have developed regulations and guidelines to promote energy efficiency and reduce the environmental impact of AC motors. These include efficiency standards, labeling programs, and incentives for the use of high-efficiency motors. Additionally, initiatives promoting motor system optimization, such as proper motor sizing, maintenance, and control, can further enhance energy efficiency and minimize environmental impact.
In summary, the environmental considerations associated with the use of AC motors include energy efficiency, greenhouse gas emissions, motor disposal and recycling, manufacturing processes, and life cycle assessment. By prioritizing energy efficiency, proper disposal, recycling, and sustainable manufacturing practices, the environmental impact of AC motors can be minimized, contributing to a more sustainable and environmentally conscious approach to motor usage.
Where can individuals or businesses find reliable information on selecting, installing, and maintaining AC motors?
When seeking information on selecting, installing, and maintaining AC motors, individuals and businesses can refer to various reliable sources. These sources provide valuable guidance, recommendations, and best practices related to AC motors. Here are some places where one can find reliable information:
- Manufacturer’s Documentation: AC motor manufacturers often provide detailed documentation, including product catalogs, technical specifications, installation guides, and maintenance manuals. These documents offer specific information about their motors, such as performance characteristics, electrical requirements, mounting instructions, and recommended maintenance procedures. Manufacturers’ websites are a common source for accessing these resources.
- Industry Associations: Industry associations related to electrical engineering, motor manufacturing, or specific applications (e.g., HVAC, pumps, or industrial machinery) can be excellent resources for reliable information. These associations often publish technical articles, guidelines, and standards that cover a wide range of topics, including motor selection, installation practices, efficiency standards, and maintenance recommendations. Examples of such associations include the National Electrical Manufacturers Association (NEMA), the Institute of Electrical and Electronics Engineers (IEEE), and the Air Conditioning, Heating, and Refrigeration Institute (AHRI).
- Professional Electricians and Engineers: Consulting with professional electricians or electrical engineers who specialize in motor applications can provide valuable insights. These professionals possess practical knowledge and experience in selecting, installing, and maintaining AC motors. They can offer personalized advice based on specific project requirements and industry best practices.
- Energy Efficiency Programs and Agencies: Energy efficiency programs and agencies, such as government departments, utility companies, or environmental organizations, often provide resources and guidance on energy-efficient motor selection and operation. These programs may offer information on motor efficiency standards, rebate programs for high-efficiency motors, and energy-saving practices. Examples include the U.S. Department of Energy (DOE) and its Energy Star program.
- Online Technical Forums and Communities: Online forums and communities focused on electrical engineering, motor applications, or specific industries can be valuable sources of information. Participating in these forums allows individuals and businesses to interact with experts, discuss motor-related topics, and seek advice from professionals and enthusiasts who have firsthand experience with AC motors.
- Books and Publications: Books and technical publications dedicated to electrical engineering, motor technology, or specific applications can provide comprehensive information on AC motors. These resources cover topics ranging from motor theory and design principles to practical installation techniques and maintenance procedures. Libraries, bookstores, and online retailers offer a wide selection of relevant publications.
When accessing information from these sources, it is important to ensure that the information is up-to-date, reliable, and relevant to the specific application or requirements. Consulting multiple sources and cross-referencing information can help verify accuracy and establish a well-rounded understanding of AC motor selection, installation, and maintenance.
Are there different types of AC motors, and what are their specific applications?
Yes, there are different types of AC motors, each with its own design, characteristics, and applications. The main types of AC motors include:
- Induction Motors: Induction motors are the most commonly used type of AC motor. They are robust, reliable, and suitable for a wide range of applications. Induction motors operate based on the principle of electromagnetic induction. They consist of a stator with stator windings and a rotor with short-circuited conductive bars or coils. The rotating magnetic field produced by the stator windings induces currents in the rotor, creating a magnetic field that interacts with the stator field and generates torque. Induction motors are widely used in industries such as manufacturing, HVAC systems, pumps, fans, compressors, and conveyor systems.
- Synchronous Motors: Synchronous motors are another type of AC motor commonly used in applications that require precise speed control. They operate at synchronous speed, which is determined by the frequency of the AC power supply and the number of motor poles. Synchronous motors have a rotor with electromagnets that are magnetized by direct current, allowing the rotor to lock onto the rotating magnetic field of the stator and rotate at the same speed. Synchronous motors are often used in applications such as industrial machinery, generators, compressors, and large HVAC systems.
- Brushless DC Motors: While the name suggests “DC,” brushless DC motors are actually driven by AC power. They utilize electronic commutation instead of mechanical brushes for switching the current in the motor windings. Brushless DC motors offer high efficiency, low maintenance, and precise control over speed and torque. They are commonly used in applications such as electric vehicles, robotics, computer disk drives, aerospace systems, and consumer electronics.
- Universal Motors: Universal motors are versatile motors that can operate on both AC and DC power. They are designed with a wound stator and a commutator rotor. Universal motors offer high starting torque and can achieve high speeds. They are commonly used in applications such as portable power tools, vacuum cleaners, food mixers, and small appliances.
- Shaded Pole Motors: Shaded pole motors are simple and inexpensive AC motors. They have a single-phase stator and a squirrel cage rotor. Shaded pole motors are characterized by low starting torque and relatively low efficiency. Due to their simple design and low cost, they are commonly used in applications such as small fans, refrigeration equipment, and appliances.
These are some of the main types of AC motors, each with its unique features and applications. The selection of an AC motor type depends on factors such as the required torque, speed control requirements, efficiency, cost, and environmental conditions. Understanding the specific characteristics and applications of each type allows for choosing the most suitable motor for a given application.
editor by CX 2024-04-25
China Standard High Speed NEMA24 48V AC 400W 1.27n. M 3000rpm Electric Brushless CNC Servo Motor for Robotic Arm vacuum pump for ac
Product Description
High speed nema24 48V AC 4; Cel: ;
FAQ:
1. Factory or trader?
We are factory, and have professional R&D team as introduced in company information.
2. How about the delivery?
– Sample: 3-5 days.
– Bulk order: 15-30 days.
3. What is your after-sales services?
1. Free maintenance within 12 months guarantee, lifetime consultant.
2. Professional solutions in installation and maintence.
4. Why choose us?
1. Factory Price & 24/7 after-sale services.
2. From mold customization to material processing and welding, from fine components to finished assembly, 72 processes, 24 control points, strict aging, finished product inspection.
5. Do you get the relevant certification?
All products are made according to ISO9001, CE requirements.
If any terms get your interest, please CLICK BELOW to send a message to us!
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Robotic Arm |
|---|---|
| Speed: | High Speed |
| Number of Stator: | Three-Phase |
| Function: | Driving |
| Casing Protection: | Closed Type |
| Number of Poles: | 8 |
| Samples: |
US$ 92/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
Are there specific maintenance requirements for AC motors to ensure optimal performance?
Yes, AC motors have specific maintenance requirements to ensure their optimal performance and longevity. Regular maintenance helps prevent unexpected failures, maximizes efficiency, and extends the lifespan of the motor. Here are some key maintenance practices for AC motors:
- Cleaning and Inspection: Regularly clean the motor to remove dust, dirt, and debris that can accumulate on the motor surfaces and hinder heat dissipation. Inspect the motor for any signs of damage, loose connections, or abnormal noise/vibration. Address any issues promptly to prevent further damage.
- Lubrication: Check the motor’s lubrication requirements and ensure proper lubrication of bearings, gears, and other moving parts. Insufficient or excessive lubrication can lead to increased friction, overheating, and premature wear. Follow the manufacturer’s guidelines for lubrication intervals and use the recommended lubricants.
- Belt and Pulley Maintenance: If the motor is coupled with a belt and pulley system, regularly inspect and adjust the tension of the belts. Improper belt tension can affect motor performance and efficiency. Replace worn-out belts and damaged pulleys as needed.
- Cooling System Maintenance: AC motors often have cooling systems such as fans or heat sinks to dissipate heat generated during operation. Ensure that these cooling systems are clean and functioning properly. Remove any obstructions that may impede airflow and compromise cooling efficiency.
- Electrical Connections: Regularly inspect the motor’s electrical connections for signs of loose or corroded terminals. Loose connections can lead to voltage drops, increased resistance, and overheating. Tighten or replace any damaged connections and ensure proper grounding.
- Vibration Analysis: Periodically perform vibration analysis on the motor to detect any abnormal vibrations. Excessive vibration can indicate misalignment, unbalanced rotors, or worn-out bearings. Address the underlying causes of vibration to prevent further damage and ensure smooth operation.
- Motor Testing: Conduct regular motor testing, such as insulation resistance testing and winding resistance measurement, to assess the motor’s electrical condition. These tests can identify insulation breakdown, winding faults, or other electrical issues that may affect motor performance and reliability.
- Professional Maintenance: For more complex maintenance tasks or when dealing with large industrial motors, it is advisable to involve professional technicians or motor specialists. They have the expertise and tools to perform in-depth inspections, repairs, and preventive maintenance procedures.
It’s important to note that specific maintenance requirements may vary depending on the motor type, size, and application. Always refer to the manufacturer’s guidelines and recommendations for the particular AC motor in use. By following proper maintenance practices, AC motors can operate optimally, minimize downtime, and have an extended service life.
What are the common signs of AC motor failure, and how can they be addressed?
AC motor failure can lead to disruptions in various industrial and commercial applications. Recognizing the common signs of motor failure is crucial for timely intervention and preventing further damage. Here are some typical signs of AC motor failure and potential ways to address them:
- Excessive Heat: Excessive heat is a common indicator of motor failure. If a motor feels excessively hot to the touch or emits a burning smell, it could signify issues such as overloaded windings, poor ventilation, or bearing problems. To address this, first, ensure that the motor is properly sized for the application. Check for obstructions around the motor that may be impeding airflow and causing overheating. Clean or replace dirty or clogged ventilation systems. If the issue persists, consult a qualified technician to inspect the motor windings and bearings and make any necessary repairs or replacements.
- Abnormal Noise or Vibration: Unusual noises or vibrations coming from an AC motor can indicate various problems. Excessive noise may be caused by loose or damaged components, misaligned shafts, or worn bearings. Excessive vibration can result from imbalanced rotors, misalignment, or worn-out motor parts. Addressing these issues involves inspecting and adjusting motor components, ensuring proper alignment, and replacing damaged or worn-out parts. Regular maintenance, including lubrication of bearings, can help prevent excessive noise and vibration and extend the motor’s lifespan.
- Intermittent Operation: Intermittent motor operation, where the motor starts and stops unexpectedly or fails to start consistently, can be a sign of motor failure. This can be caused by issues such as faulty wiring connections, damaged or worn motor brushes, or problems with the motor’s control circuitry. Check for loose or damaged wiring connections and make any necessary repairs. Inspect and replace worn or damaged motor brushes. If the motor still exhibits intermittent operation, it may require professional troubleshooting and repair by a qualified technician.
- Overheating or Tripping of Circuit Breakers: If an AC motor consistently causes circuit breakers to trip or if it repeatedly overheats, it indicates a problem that needs attention. Possible causes include high starting currents, excessive loads, or insulation breakdown. Verify that the motor is not overloaded and that the load is within the motor’s rated capacity. Check the motor’s insulation resistance to ensure it is within acceptable limits. If these measures do not resolve the issue, consult a professional to assess the motor and its electrical connections for any faults or insulation breakdown that may require repair or replacement.
- Decreased Performance or Efficiency: A decline in motor performance or efficiency can be an indication of impending failure. This may manifest as reduced speed, decreased torque, increased energy consumption, or inadequate power output. Factors contributing to decreased performance can include worn bearings, damaged windings, or deteriorated insulation. Regular maintenance, including lubrication and cleaning, can help prevent these issues. If performance continues to decline, consult a qualified technician to inspect the motor and perform any necessary repairs or replacements.
- Inoperative Motor: If an AC motor fails to operate entirely, there may be an issue with the power supply, control circuitry, or internal motor components. Check the power supply and connections for any faults or interruptions. Inspect control circuitry, such as motor starters or contactors, for any damage or malfunction. If no external faults are found, it may be necessary to dismantle the motor and inspect internal components, such as windings or brushes, for any faults or failures that require repair or replacement.
It’s important to note that motor failure causes can vary depending on factors such as motor type, operating conditions, and maintenance practices. Regular motor maintenance, including inspections, lubrication, and cleaning, is essential for early detection of potential failure signs and for addressing issues promptly. When in doubt, it is advisable to consult a qualified electrician, motor technician, or manufacturer’s guidelines for appropriate troubleshooting and repair procedures specific to the motor model and application.
What are the main components of an AC motor, and how do they contribute to its operation?
An AC motor consists of several key components that work together to facilitate its operation. These components include:
- Stator: The stator is the stationary part of an AC motor. It is typically made of a laminated core that provides a path for the magnetic flux. The stator contains stator windings, which are coils of wire wound around the stator core. The stator windings are connected to an AC power source and produce a rotating magnetic field when energized. The rotating magnetic field is a crucial element in generating the torque required for the motor’s operation.
- Rotor: The rotor is the rotating part of an AC motor. It is located inside the stator and is connected to a shaft. The rotor can have different designs depending on the type of AC motor. In an induction motor, the rotor does not have electrical connections. Instead, it contains conductive bars or coils that are short-circuited. The rotating magnetic field of the stator induces currents in the short-circuited rotor conductors, creating a magnetic field that interacts with the stator field and generates torque, causing the rotor to rotate. In a synchronous motor, the rotor contains electromagnets that are magnetized by direct current, allowing the rotor to lock onto the rotating magnetic field of the stator and rotate at the same speed.
- Bearing: Bearings are used to support and facilitate the smooth rotation of the rotor shaft. They reduce friction and allow the rotor to rotate freely within the motor. Bearings are typically located at both ends of the motor shaft and are designed to withstand the axial and radial forces generated during operation.
- End Bells: The end bells, also known as end covers or end brackets, enclose the motor’s stator and rotor assembly. They provide mechanical support and protection for the internal components of the motor. End bells are typically made of metal and are designed to provide a housing for the bearings and secure the motor to its mounting structure.
- Fan or Cooling System: AC motors often generate heat during operation. To prevent overheating and ensure proper functioning, AC motors are equipped with fans or cooling systems. These help dissipate heat by circulating air or directing airflow over the motor’s components, including the stator and rotor windings. Effective cooling is crucial for maintaining the motor’s efficiency and extending its lifespan.
- Terminal Box or Connection Box: The terminal box is a housing located on the outside of the motor that provides access to the motor’s electrical connections. It contains terminals or connection points where external wires can be connected to supply power to the motor. The terminal box ensures a safe and secure connection of the motor to the electrical system.
- Additional Components: Depending on the specific design and application, AC motors may include additional components such as capacitors, centrifugal switches, brushes (in certain types of AC motors), and other control devices. These components are used for various purposes, such as improving motor performance, providing starting assistance, or enabling specific control features.
Each of these components plays a crucial role in the operation of an AC motor. The stator and rotor are the primary components responsible for generating the rotating magnetic field and converting electrical energy into mechanical motion. The bearings ensure smooth rotation of the rotor shaft, while the end bells provide structural support and protection. The fan or cooling system helps maintain optimal operating temperatures, and the terminal box allows for proper electrical connections. Additional components are incorporated as necessary to enhance motor performance and enable specific functionalities.
editor by CX 2024-04-11
China supplier Tcds-4 (1.1KW) High Torque Low Speed Permanent Magnet AC Induction Electric Motor with CCC CE ISO9001 for Hvls Industrial Ceiling Fan and Aerator vacuum pump electric
Product Description
TCDS-4 (1.1KW) High Torque Low Speed Permanent Magnet AC Induction Electric Motor With CCC CE ISO9001 for HVLS Industrial ceiling fan And Aerator
The brushless AC permanent magnet motor have A variety of installation methods, suitable for all kinds of fans (B3, B5, B30 installation).
1.Product Introduction
TCDS-4 (1.1KW) High Torque Low Speed Permanent Magnet AC Induction Electric Motor With CCC CE ISO9001 for HVLS Industrial ceiling fan Aerator are non-carbon brush, no hall, AC -driven, large torque permanent magnet ,can meet the different voltage requirements and speed regulation requirements of customers, and the maintenance is convenient.
2.Products Parameter
| Type | Power (Kw) | Voltage (V) |
Hz | Speed (RPM/M) |
| TCDS-4 | 1.1 | 380 | 50/60 | 100 |
| TCDS-5.2 | 1.1 | 380 | 50/60 | 85 |
| TCDS-6.2 | 1.5 | 380 | 50/60 | 60 |
| TCDS-7.3 | 1.5 | 380 | 50/60 | 50 |
| TCDS-8 | 1.5 | 380 | 50/60 | 45 |
3.Product Application
TCDS-4 (1.1KW) High Torque Low Speed Permanent Magnet AC Induction Electric Motor With CCC CE ISO9001 for HVLS Industrial ceiling fan Aerator can be used in industrial plant, warehousing, public place and large spaces. It is also suitable for ship deck machinry, winches, driven and swing purpose application, reliable quality, can replace other low speed high torque motor perfectly.
4.Related Products
5.TAIHCNENG MOTOR FACTORY AND WORKSHOP
6.HIGH-QUALITY MATERIALS
7.SHOWROOM
8.HONORS& CERTIFICATES
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Industrial |
|---|---|
| Speed: | Variable Speed |
| Number of Stator: | Three-Phase |
| Function: | Driving |
| Casing Protection: | Closed Type |
| Number of Poles: | 60 |
| Samples: |
US$ 750/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
Are there environmental considerations associated with the use of AC motors?
Yes, there are several environmental considerations associated with the use of AC motors. These considerations are primarily related to energy consumption, greenhouse gas emissions, and the disposal of motors at the end of their life cycle. Let’s explore these environmental considerations in detail:
- Energy Efficiency: AC motors can have varying levels of energy efficiency, which directly impacts their environmental impact. Motors with higher efficiency convert a larger percentage of electrical energy into useful mechanical work, resulting in reduced energy consumption. By selecting and using high-efficiency AC motors, energy usage can be minimized, leading to lower greenhouse gas emissions and reduced reliance on fossil fuels for electricity generation.
- Greenhouse Gas Emissions: The electricity consumed by AC motors is often produced by power plants that burn fossil fuels, such as coal, natural gas, or oil. The generation of electricity from these fossil fuels releases greenhouse gases, contributing to climate change. By employing energy-efficient motors and optimizing motor systems, businesses and individuals can reduce their electricity demand, leading to lower greenhouse gas emissions and a smaller carbon footprint.
- Motor Disposal and Recycling: AC motors contain various materials, including metals, plastics, and electrical components. At the end of their life cycle, proper disposal or recycling is important to minimize their environmental impact. Some components, such as copper windings and steel casings, can be recycled, reducing the need for new raw materials and energy-intensive manufacturing processes. It is crucial to follow local regulations and guidelines for the disposal and recycling of motors to prevent environmental pollution and promote resource conservation.
- Manufacturing and Production: The manufacturing and production processes associated with AC motors can have environmental implications. The extraction and processing of raw materials, such as metals and plastics, can result in habitat destruction, energy consumption, and greenhouse gas emissions. Additionally, the manufacturing processes themselves can generate waste and pollutants. Motor manufacturers can mitigate these environmental impacts by adopting sustainable practices, using recycled materials, reducing waste generation, and implementing energy-efficient production methods.
- Life Cycle Assessment: Conducting a life cycle assessment (LCA) of AC motors can provide a holistic view of their environmental impact. An LCA considers the environmental aspects associated with the entire life cycle of the motor, including raw material extraction, manufacturing, transportation, use, and end-of-life disposal or recycling. By analyzing the different stages of the motor’s life cycle, stakeholders can identify opportunities for improvement, such as optimizing energy efficiency, reducing emissions, and implementing sustainable practices.
To address these environmental considerations, governments, organizations, and industry standards bodies have developed regulations and guidelines to promote energy efficiency and reduce the environmental impact of AC motors. These include efficiency standards, labeling programs, and incentives for the use of high-efficiency motors. Additionally, initiatives promoting motor system optimization, such as proper motor sizing, maintenance, and control, can further enhance energy efficiency and minimize environmental impact.
In summary, the environmental considerations associated with the use of AC motors include energy efficiency, greenhouse gas emissions, motor disposal and recycling, manufacturing processes, and life cycle assessment. By prioritizing energy efficiency, proper disposal, recycling, and sustainable manufacturing practices, the environmental impact of AC motors can be minimized, contributing to a more sustainable and environmentally conscious approach to motor usage.
What are the safety considerations when working with or around AC motors?
Working with or around AC motors requires careful attention to safety to prevent accidents, injuries, and electrical hazards. Here are some important safety considerations to keep in mind:
- Electrical Hazards: AC motors operate on high voltage electrical systems, which pose a significant electrical hazard. It is essential to follow proper lockout/tagout procedures when working on motors to ensure that they are de-energized and cannot accidentally start up. Only qualified personnel should perform electrical work on motors, and they should use appropriate personal protective equipment (PPE), such as insulated gloves, safety glasses, and arc flash protection, to protect themselves from electrical shocks and arc flash incidents.
- Mechanical Hazards: AC motors often drive mechanical equipment, such as pumps, fans, or conveyors, which can present mechanical hazards. When working on or near motors, it is crucial to be aware of rotating parts, belts, pulleys, or couplings that can cause entanglement or crushing injuries. Guards and safety barriers should be in place to prevent accidental contact with moving parts, and proper machine guarding principles should be followed. Lockout/tagout procedures should also be applied to the associated mechanical equipment to ensure it is safely de-energized during maintenance or repair.
- Fire and Thermal Hazards: AC motors can generate heat during operation, and in some cases, excessive heat can pose a fire hazard. It is important to ensure that motors are adequately ventilated to dissipate heat and prevent overheating. Motor enclosures and cooling systems should be inspected regularly to ensure proper functioning. Additionally, combustible materials should be kept away from motors to reduce the risk of fire. If a motor shows signs of overheating or emits a burning smell, it should be immediately shut down and inspected by a qualified professional.
- Proper Installation and Grounding: AC motors should be installed and grounded correctly to ensure electrical safety. Motors should be installed according to manufacturer guidelines, including proper alignment, mounting, and connection of electrical cables. Adequate grounding is essential to prevent electrical shocks and ensure the safe dissipation of fault currents. Grounding conductors, such as grounding rods or grounding straps, should be properly installed and regularly inspected to maintain their integrity.
- Safe Handling and Lifting: AC motors can be heavy and require proper handling and lifting techniques to prevent musculoskeletal injuries. When moving or lifting motors, equipment such as cranes, hoists, or forklifts should be used, and personnel should be trained in safe lifting practices. It is important to avoid overexertion and use proper lifting tools, such as slings or lifting straps, to distribute the weight evenly and prevent strain or injury.
- Training and Awareness: Proper training and awareness are critical for working safely with or around AC motors. Workers should receive training on electrical safety, lockout/tagout procedures, personal protective equipment usage, and safe work practices. They should be familiar with the specific hazards associated with AC motors and understand the appropriate safety precautions to take. Regular safety meetings and reminders can help reinforce safe practices and keep safety at the forefront of everyone’s minds.
It is important to note that the safety considerations mentioned above are general guidelines. Specific safety requirements may vary depending on the motor size, voltage, and the specific workplace regulations and standards in place. It is crucial to consult relevant safety codes, regulations, and industry best practices to ensure compliance and maintain a safe working environment when working with or around AC motors.
What are the main components of an AC motor, and how do they contribute to its operation?
An AC motor consists of several key components that work together to facilitate its operation. These components include:
- Stator: The stator is the stationary part of an AC motor. It is typically made of a laminated core that provides a path for the magnetic flux. The stator contains stator windings, which are coils of wire wound around the stator core. The stator windings are connected to an AC power source and produce a rotating magnetic field when energized. The rotating magnetic field is a crucial element in generating the torque required for the motor’s operation.
- Rotor: The rotor is the rotating part of an AC motor. It is located inside the stator and is connected to a shaft. The rotor can have different designs depending on the type of AC motor. In an induction motor, the rotor does not have electrical connections. Instead, it contains conductive bars or coils that are short-circuited. The rotating magnetic field of the stator induces currents in the short-circuited rotor conductors, creating a magnetic field that interacts with the stator field and generates torque, causing the rotor to rotate. In a synchronous motor, the rotor contains electromagnets that are magnetized by direct current, allowing the rotor to lock onto the rotating magnetic field of the stator and rotate at the same speed.
- Bearing: Bearings are used to support and facilitate the smooth rotation of the rotor shaft. They reduce friction and allow the rotor to rotate freely within the motor. Bearings are typically located at both ends of the motor shaft and are designed to withstand the axial and radial forces generated during operation.
- End Bells: The end bells, also known as end covers or end brackets, enclose the motor’s stator and rotor assembly. They provide mechanical support and protection for the internal components of the motor. End bells are typically made of metal and are designed to provide a housing for the bearings and secure the motor to its mounting structure.
- Fan or Cooling System: AC motors often generate heat during operation. To prevent overheating and ensure proper functioning, AC motors are equipped with fans or cooling systems. These help dissipate heat by circulating air or directing airflow over the motor’s components, including the stator and rotor windings. Effective cooling is crucial for maintaining the motor’s efficiency and extending its lifespan.
- Terminal Box or Connection Box: The terminal box is a housing located on the outside of the motor that provides access to the motor’s electrical connections. It contains terminals or connection points where external wires can be connected to supply power to the motor. The terminal box ensures a safe and secure connection of the motor to the electrical system.
- Additional Components: Depending on the specific design and application, AC motors may include additional components such as capacitors, centrifugal switches, brushes (in certain types of AC motors), and other control devices. These components are used for various purposes, such as improving motor performance, providing starting assistance, or enabling specific control features.
Each of these components plays a crucial role in the operation of an AC motor. The stator and rotor are the primary components responsible for generating the rotating magnetic field and converting electrical energy into mechanical motion. The bearings ensure smooth rotation of the rotor shaft, while the end bells provide structural support and protection. The fan or cooling system helps maintain optimal operating temperatures, and the terminal box allows for proper electrical connections. Additional components are incorporated as necessary to enhance motor performance and enable specific functionalities.
editor by CX 2024-03-26
China Custom 45mm 12V High Torque Low Speed Planetary Gear Motor with Best Sales
Product Description
45mm 12V High Torque Low Speed Planetary Gear Motor
Gearbox data:
| Number of stages | 1stages reduction | 2 stages reduction | 3 stages reduction | 4 stages reduction | 5 stages reduction |
| Reduction ratio | 3.7,5.2 | 13.7,19.2,26.9 | 50.9,71.2,99.5,139 | 188,264,369,516,721 | 669,977,1367,1911,2672,3736, |
| gearbox length ” L” mm | 26.4 | 32.6 | 38.9 | 45.3 | 52.5 |
| Max.Running torque | 3.0Kgf · cm | 6.0Kgf · cm | 8.0Kgf · cm | 12.0Kgf · cm | 20Kgf · cm |
| Max. Gear breaking torque | 9.0Kgf · cm | 18.0Kgf · cm | 24Kgf · cm | 36Kgf · cm | 60Kgf · cm |
| Max. Gearing efficiency | 90% | 81% | 73% | 65% |
Motor data:
| Motor name | Rated volt.v | No load | Load torque | Stall torque | |||||||||||||||||
| Current | Speed | Current | Speed | Torque | Output power | Torque | Current | ||||||||||||||
| mA | r/min | mA | r/min | gf · cm | W | gf · cm | mA | ||||||||||||||
| RS-555123 | 12 | ≤220 | 45 | 12 | ≤350 | 6 | 24 | ≤70 | 3 | 24 | ≤110 | 45 | 24 | ≤180 | 6000 | ≤1000 | 4500 | 300 | 13.5 | 1200 | 4000 |
| 1,This table lists some motors parameters, others please refer to specific parameters of rs-555.htm” 2,Afier connecting motor and gearbox which is named gearmotor the output torque:motor torque X reduction ratio X gearing efficiency;output speed:motor speed / reduction ratio. |
|||||||||||||||||||||
Company Introduction
| Output Speed: | 0.5rpm—2000rpm |
|---|---|
| Gears: | Metal Gear,Powder Metallurgy |
| Gearing Arrangement: | Planetary |
| Power: | DC |
| Drive Motor: | Low Noise |
| Motor: | with Gearbox |
| Customization: |
Available
| Customized Request |
|---|
Dynamic Modeling of a Planetary Motor
A planetary gear motor consists of a series of gears rotating in perfect synchrony, allowing them to deliver torque in a higher output capacity than a spur gear motor. Unlike the planetary motor, spur gear motors are simpler to build and cost less, but they are better for applications requiring lower torque output. That is because each gear carries the entire load. The following are some key differences between the two types of gearmotors.
planetary gear system
A planetary gear transmission is a type of gear mechanism that transfers torque from one source to another, usually a rotary motion. Moreover, this type of gear transmission requires dynamic modeling to investigate its durability and reliability. Previous studies included both uncoupled and coupled meshing models for the analysis of planetary gear transmission. The combined model considers both the shaft structural stiffness and the bearing support stiffness. In some applications, the flexible planetary gear may affect the dynamic response of the system.
In a planetary gear device, the axial end surface of the cylindrical portion is rotatable relative to the separating plate. This mechanism retains lubricant. It is also capable of preventing foreign particles from entering the planetary gear system. A planetary gear device is a great choice if your planetary motor’s speed is high. A high-quality planetary gear system can provide a superior performance than conventional systems.
A planetary gear system is a complex mechanism, involving three moving links that are connected to each other through joints. The sun gear acts as an input and the planet gears act as outputs. They rotate about their axes at a ratio determined by the number of teeth on each gear. The sun gear has 24 teeth, while the planet gears have three-quarters that ratio. This ratio makes a planetary motor extremely efficient.
planetary gear train
To predict the free vibration response of a planetary motor gear train, it is essential to develop a mathematical model for the system. Previously, static and dynamic models were used to study the behavior of planetary motor gear trains. In this study, a dynamic model was developed to investigate the effects of key design parameters on the vibratory response. Key parameters for planetary gear transmissions include the structure stiffness and mesh stiffness, and the mass and location of the shaft and bearing supports.
The design of the planetary motor gear train consists of several stages that can run with variable input speeds. The design of the gear train enables the transmission of high torques by dividing the load across multiple planetary gears. In addition, the planetary gear train has multiple teeth which mesh simultaneously in operation. This design also allows for higher efficiency and transmittable torque. Here are some other advantages of planetary motor gear trains. All these advantages make planetary motor gear trains one of the most popular types of planetary motors.
The compact footprint of planetary gears allows for excellent heat dissipation. High speeds and sustained performances will require lubrication. This lubricant can also reduce noise and vibration. But if these characteristics are not desirable for your application, you can choose a different gear type. Alternatively, if you want to maintain high performance, a planetary motor gear train will be the best choice. So, what are the advantages of planetary motor gears?
planetary gear train with fixed carrier train ratio
The planetary gear train is a common type of transmission in various machines. Its main advantages are high efficiency, compactness, large transmission ratio, and power-to-weight ratio. This type of gear train is a combination of spur gears, single-helical gears, and herringbone gears. Herringbone planetary gears have lower axial force and high load carrying capacity. Herringbone planetary gears are commonly used in heavy machinery and transmissions of large vehicles.
To use a planetary gear train with a fixed carrier train ratio, the first and second planets must be in a carrier position. The first planet is rotated so that its teeth mesh with the sun’s. The second planet, however, cannot rotate. It must be in a carrier position so that it can mesh with the sun. This requires a high degree of precision, so the planetary gear train is usually made of multiple sets. A little analysis will simplify this design.
The planetary gear train is made up of three components. The outer ring gear is supported by a ring gear. Each gear is positioned at a specific angle relative to one another. This allows the gears to rotate at a fixed rate while transferring the motion. This design is also popular in bicycles and other small vehicles. If the planetary gear train has several stages, multiple ring gears may be shared. A stationary ring gear is also used in pencil sharpener mechanisms. Planet gears are extended into cylindrical cutters. The ring gear is stationary and the planet gears rotate around a sun axis. In the case of this design, the outer ring gear will have a -3/2 planet gear ratio.
planetary gear train with zero helix angle
The torque distribution in a planetary gear is skewed, and this will drastically reduce the load carrying capacity of a needle bearing, and therefore the life of the bearing. To better understand how this can affect a gear train, we will examine two studies conducted on the load distribution of a planetary gear with a zero helix angle. The first study was done with a highly specialized program from the bearing manufacturer INA/FAG. The red line represents the load distribution along a needle roller in a zero helix gear, while the green line corresponds to the same distribution of loads in a 15 degree helix angle gear.
Another method for determining a gear’s helix angle is to consider the ratio of the sun and planet gears. While the sun gear is normally on the input side, the planet gears are on the output side. The sun gear is stationary. The two gears are in engagement with a ring gear that rotates 45 degrees clockwise. Both gears are attached to pins that support the planet gears. In the figure below, you can see the tangential and axial gear mesh forces on a planetary gear train.
Another method used for calculating power loss in a planetary gear train is the use of an auto transmission. This type of gear provides balanced performance in both power efficiency and load capacity. Despite the complexities, this method provides a more accurate analysis of how the helix angle affects power loss in a planetary gear train. If you’re interested in reducing the power loss of a planetary gear train, read on!
planetary gear train with spur gears
A planetary gearset is a type of mechanical drive system that uses spur gears that move in opposite directions within a plane. Spur gears are one of the more basic types of gears, as they don’t require any specialty cuts or angles to work. Instead, spur gears use a complex tooth shape to determine where the teeth will make contact. This in turn, will determine the amount of power, torque, and speed they can produce.
A two-stage planetary gear train with spur gears is also possible to run at variable input speeds. For such a setup, a mathematical model of the gear train is developed. Simulation of the dynamic behaviour highlights the non-stationary effects, and the results are in good agreement with the experimental data. As the ratio of spur gears to spur gears is not constant, it is called a dedendum.
A planetary gear train with spur gears is a type of epicyclic gear train. In this case, spur gears run between gears that contain both internal and external teeth. The circumferential motion of the spur gears is analogous to the rotation of planets in the solar system. There are four main components of a planetary gear train. The planet gear is positioned inside the sun gear and rotates to transfer motion to the sun gear. The planet gears are mounted on a joint carrier that is connected to the output shaft.
planetary gear train with helical gears
A planetary gear train with helical teeth is an extremely powerful transmission system that can provide high levels of power density. Helical gears are used to increase efficiency by providing a more efficient alternative to conventional worm gears. This type of transmission has the potential to improve the overall performance of a system, and its benefits extend far beyond the power density. But what makes this transmission system so appealing? What are the key factors to consider when designing this type of transmission system?
The most basic planetary train consists of the sun gear, planet gear, and ring gear elements. The number of planets varies, but the basic structure of planetary gears is similar. A simple planetary geartrain has the sun gear driving a carrier assembly. The number of planets can be as low as two or as high as six. A planetary gear train has a low mass inertia and is compact and reliable.
The mesh phase properties of a planetary gear train are particularly important in designing the profiles. Various parameters such as mesh phase difference and tooth profile modifications must be studied in depth in order to fully understand the dynamic characteristics of a PGT. These factors, together with others, determine the helical gears’ performance. It is therefore essential to understand the mesh phase of a planetary gear train to design it effectively.
editor by CX 2023-05-25
China 15W 110V 220v High Torque Low Rpm 1ph 3ph Speed Adjustable AC Gear Motor with Speed Controller motorbase
Warranty: 3months-1year
Model Number: 3IK15GN
Type: Induction Motor
Frequency: 50HZ/60HZ
Phase: Single-phase
Protect Feature: Drip-proof
AC Voltage: 110v-380v
Efficiency: IE 2
Product Name: AC induction motor
Power: 15w (6w-750w)
Torque: 90mN.m
Rated Speed: 1450r/min
Motor Frame Size: 104mm
Pinion Shaft: GN Type
Current: 0.350A
Capacitor: 6.0uF
Motor Type: Induction motor
Certification: ce
Packaging Details: carton
15W 110V 220v High Torque Low Rpm 1ph 3ph Speed Adjustable AC Gear Motor with Speed Controller Specification we can custom parameters and shaft size, please contact us 1. When the motor is approved under various safety standards, the model name on the nameplate is the approved model name. Note:2. “-A” it means the voltage 110V, the assembly capacitor value it is according the label.
| Motor TypeLead Wire Type | Output powerW | VoltageV | FrequencyHz | CurrentA | Starting torquemN.m | Raed TorquemN.m | Rated speedr/min | CapacitorμF | ||
| Pinion Shaft | Round Shaft | |||||||||
| 3IK15GN-C | 3IK15A-C | 15 | 1ph220 | 50 | 0.18 | 90 | 125 | 1250 | 1.2 | |
| 1ph230 | 0.2 | |||||||||
| 3RK15GN-C | 3RK15A-C | 15 | 1ph220 | 60 | 0.16 | 65 | 105 | 1550 | ||
| 1ph230 | 0.15 | 70 | ||||||||
| Gearhead Type | Gearhead Model | Gear Ratio | |||
| Long LifeLow Noise | 3GN K | 3 3.6 5 6 7.5 9 12.5 180 200 | |||
| 2GN K (Mid-gearbox) | |||||
Benefits of a Planetary Motor
Besides being one of the most efficient forms of a drive, a Planetary Motor also offers a great number of other benefits. These features enable it to create a vast range of gear reductions, as well as generate higher torques and torque density. Let’s take a closer look at the benefits this mechanism has to offer. To understand what makes it so appealing, we’ll explore the different types of planetary systems.
Solar gear
The solar gear on a planetary motor has two distinct advantages. It produces less noise and heat than a helical gear. Its compact footprint also minimizes noise. It can operate at high speeds without sacrificing efficiency. However, it must be maintained with constant care to operate efficiently. Solar gears can be easily damaged by water and other debris. Solar gears on planetary motors may need to be replaced over time.
A planetary gearbox is composed of a sun gear and two or more planetary ring and spur gears. The sun gear is the primary gear and is driven by the input shaft. The other two gears mesh with the sun gear and engage the stationary ring gear. The three gears are held together by a carrier, which sets the spacing. The output shaft then turns the planetary gears. This creates an output shaft that rotates.
Another advantage of planetary gears is that they can transfer higher torques while being compact. These advantages have led to the creation of solar gears. They can reduce the amount of energy consumed and produce more power. They also provide a longer service life. They are an excellent choice for solar-powered vehicles. But they must be installed by a certified solar energy company. And there are other advantages as well. When you install a solar gear on a planetary motor, the energy produced by the sun will be converted to useful energy.
A solar gear on a planetary motor uses a solar gear to transmit torque from the sun to the planet. This system works on the principle that the sun gear rotates at the same rate as the planet gears. The sun gear has a common design modulus of -Ns/Np. Hence, a 24-tooth sun gear equals a 3-1/2 planet gear ratio. When you consider the efficiency of solar gears on planetary motors, you will be able to determine whether the solar gears are more efficient.
Sun gear
The mechanical arrangement of a planetary motor comprises of two components: a ring gear and a sun gear. The ring gear is fixed to the motor’s output shaft, while the sun gear rolls around and orbits around it. The ring gear and sun gear are linked by a planetary carrier, and the torque they produce is distributed across their teeth. The planetary structure arrangement also reduces backlash, and is critical to achieve a quick start and stop cycle.
When the two planetary gears rotate independently, the sun gear will rotate counterclockwise and the ring-gear will turn in the same direction. The ring-gear assembly is mounted in a carrier. The carrier gear and sun gear are connected to each other by a shaft. The planetary gears and sun gear rotate around each other on the ring-gear carrier to reduce the speed of the output shaft. The planetary gear system can be multiplied or staged to obtain a higher reduction ratio.
A planetary gear motor mimics the planetary rotation system. The input shaft turns a central gear, known as the sun gear, while the planetary gears rotate around a stationary sun gear. The motor’s compact design allows it to be easily mounted to a vehicle, and its low weight makes it ideal for small vehicles. In addition to being highly efficient, a planetary gear motor also offers many other benefits.
A planetary gearbox uses a sun gear to provide torque to the other gears. The planet pinions mesh with an internal tooth ring gear to generate rotation. The carrier also acts as a hub between the input gear and output shaft. The output shaft combines these two components, giving a higher torque. There are three types of planetary gearboxes: the sun gear and a wheel drive planetary gearbox.
Planetary gear
A planetary motor gear works by distributing rotational force along a separating plate and a cylindrical shaft. A shock-absorbing device is included between the separating plate and cylindrical shaft. This depressed portion prevents abrasion wear and foreign particles from entering the device. The separating plate and shaft are positioned coaxially. In this arrangement, the input shaft and output shaft are rotated relative to one another. The rotatable disc absorbs the impact.
Another benefit of a planetary motor gear is its efficiency. Planetary motor gears are highly efficient at transferring power, with 97% of the input energy being transferred to the output. They can also have high gear ratios, and offer low noise and backlash. This design also allows the planetary gearbox to work with electric motors. In addition, planetary gears also have a long service life. The efficiency of planetary gears is due in part to the large number of teeth.
Other benefits of a planetary motor gear include the ease of changing ratios, as well as the reduced safety stock. Unlike other gears, planetary gears don’t require special tools for changing ratios. They are used in numerous industries, and share parts across multiple sizes. This means that they are cost-effective to produce and require less safety stock. They can withstand high shock and wear, and are also compact. If you’re looking for a planetary motor gear, you’ve come to the right place.
The axial end surface of a planetary gear can be worn down by abrasion with a separating plate. In addition, foreign particles may enter the planetary gear device. These particles can damage the gears or even cause noise. As a result, you should check planetary gears for damage and wear. If you’re looking for a gear, make sure it has been thoroughly tested and installed by a professional.
Planetary gearbox
A planetary motor and gearbox are a common combination of electric and mechanical power sources. They share the load of rotation between multiple gear teeth to increase the torque capacity. This design is also more rigid, with low backlash that can be as low as one or two arc minutes. The advantages of a planetary gearmotor over a conventional electric motor include compact size, high efficiency, and less risk of gear failure. Planetary gear motors are also more reliable and durable than conventional electric motors.
A planetary gearbox is designed for a single stage of reduction, or a multiple-stage unit can be built with several individual cartridges. Gear ratios may also be selected according to user preference, either to face mount the output stage or to use a 5mm hex shaft. For multi-stage planetary gearboxes, there are a variety of different options available. These include high-efficiency planetary gearboxes that achieve a 98% efficiency at single reduction. In addition, they are noiseless, and reduce heat loss.
A planetary gearbox may be used to increase torque in a robot or other automated system. There are different types of planetary gear sets available, including gearboxes with sliding or rolling sections. When choosing a planetary gearset, consider the environment and other factors such as backlash, torque, and ratio. There are many advantages to a planetary gearbox and the benefits and drawbacks associated with it.
Planetary gearboxes are similar to those in a solar system. They feature a central sun gear in the middle, two or more outer gears, and a ring gear at the output. The planetary gears rotate in a ring-like structure around a stationary sun gear. When the gears are engaged, they are connected by a carrier that is fixed to the machine’s shaft.
Planetary gear motor
Planetary gear motors reduce the rotational speed of an armature by one or more times. The reduction ratio depends on the structure of the planetary gear device. The planetary gear device has an output shaft and an armature shaft. A separating plate separates the two. The output shaft moves in a circular pattern to turn the pinion 3. When the pinion rotates to the engagement position, it is engaged with the ring gear 4. The ring gear then transmits the rotational torque to the armature shaft. The result is that the engine cranks up.
Planetary gear motors are cylindrical in shape and are available in various power levels. They are typically made of steel or brass and contain multiple gears that share the load. These motors can handle massive power transfers. The planetary gear drive, on the other hand, requires more components, such as a sun’s gear and multiple planetary gears. Consequently, it may not be suitable for all types of applications. Therefore, the planetary gear drive is generally used for more complex machines.
Brush dusts from the electric motor may enter the planetary gear device and cause it to malfunction. In addition, abrasion wear on the separating plate can affect the gear engagement of the planetary gear device. If this occurs, the gears will not engage properly and may make noise. In order to prevent such a situation from occurring, it is important to regularly inspect planetary gear motors and their abrasion-resistant separating plates.
Planetary gear motors come in many different power levels and sizes. These motors are usually cylindrical in shape and are made of steel, brass, plastic, or a combination of both materials. A planetary gear motor can be used in applications where space is an issue. This motor also allows for low gearings in small spaces. The planetary gearing allows for large amounts of power transfer. The output shaft size is dependent on the gear ratio and the motor speed.
editor by czh
China factory 16RP030 16 mm high efficiency motor 12v high torque high speed 130 rpm small planetary gearbox motor car motor
Warranty: 3months-1year
Model Number: 16RP030
Usage: Home Appliance, Beauty instrument, Intelligent Home, Wiper
Sort: Gear MOTOR
Torque: .3~10Kgf.cm
Development: Everlasting Magnet
Commutation: Brush
Safeguard Function: Drip-evidence
Speed(RPM): 1~2000rpm
Continuous Recent(A): .1~.5A
Efficiency: IE 1
Application: Surveillance, sensible curtain, water meter, electric drill
Rated Voltage: 3V, 6V, 9V, 12V, 24V
Direction of rotation: CW, CCW
Gearbox Diameter: sixteen mm
Motor kind: Dc Brush Gear Motor
Brush Sort: 6v Dc Micro Gear Motor
Operate: Pushed Tools
Search phrases: Planetary Dc Motor
Attribute: Prolonged Daily life Time
Product Title: Dc Planetary Equipment Motor
Packaging Specifics: 1. Internal: embeded in Foam pad2. Outer: paced in standard carton
Port: HangZhou, HangZhou, Hongkong
| Maker | ZHUOXI MOTOR, ZX MOTOR |
| Solution | Planetary Equipment DC Motor |
| Gearbox dimension | 16mm, 22mm, 28mm, 36mm, 42mm etc |
| Brush motor measurement | N20, N30, 030, RE536962RE501455RE536968RE515748 Gasket Package John Deere 4045 Motor 4CYL, 4V Tractor Spare Parts Farm Tractor For John Deere 050, a hundred thirty, a hundred and eighty, 280, three hundred, 310, 370, 385, 395, 520, 3525, 3530, 3540, 545, 555, 775, 5512, 31ZY etc. |
| BLDC motor size | BLDC 2418, BLDC 2838, BLDC 3625, BLDC 3650, Changchai Engine parts S195 S1115 diesel motor Governor assembly BLDC 4260 and so forth. |
| Voltage variety | 3V, 6V, 9V, 12V, 18V, 24V |
| Output torque | 100gf.cm ~ 100kgf.cm |
| Output speed | 1rpm ~ 2000rpm |
The Benefits of Using a Gear Motor
A gear motor works on the principle of conservation of angular momentum. As the smaller gear covers more RPM and the larger gear produces more torque, the ratio between the two is greater than one. Similarly, a multiple gear motor follows the principle of energy conservation, with the direction of rotation always opposite to the one that is adjacent to it. It’s easy to understand the concept behind gear motors and the various types available. Read on to learn about the different types of gears and their applications.
Electric motor
The choice of an electric motor for gear motor is largely dependent on the application. There are various motor and gearhead combinations available, and some are more efficient than others. However, it is critical to understand the application requirements and select a motor that meets these needs. In this article, we’ll examine some of the benefits of using a gear motor. The pros and cons of each type are briefly discussed. You can buy new gear motors at competitive prices, but they aren’t the most reliable or durable option for your application.
To determine which motor is best for your application, you’ll need to consider the load and speed requirements. A gear motor’s efficiency (e) can be calculated by taking the input and output values and calculating their relation. On the graph below, the input (T) and output (P) values are represented as dashed lines. The input (I) value is represented as the torque applied to the motor shaft. The output (P) is the amount of mechanical energy converted. A DC gear motor is 70% efficient at 3.75 lb-in / 2,100 rpm.
In addition to the worm gear motor, you can also choose a compact DC worm gear motor with a variable gear ratio from 7.5 to 80. It has a range of options and can be custom-made for your specific application. The 3-phase AC gear motor, on the other hand, works at a rated power of one hp and torque of 1.143.2 kg-m. The output voltage is typically 220V.
Another important factor is the output shaft orientation. There are two main orientations for gearmotors: in-line and offset. In-line output shafts are most ideal for applications with high torque and short reduction ratios. If you want to avoid backlash, choose a right angle output shaft. An offset shaft can cause the output shaft to become excessively hot. If the output shaft is angled at a certain angle, it may be too large or too small.
Gear reducer
A gear reducer is a special kind of speed reducing motor, usually used in large machinery, such as compressors. These reducers have no cooling fan and are not designed to handle heavy loads. Different purposes require different service factors. For instance, a machine that requires frequent fast accelerations and occasional load spikes needs a gear reducer with a high service factor. A gear reducer that’s designed for long production shifts should be larger than a machine that uses it for short periods of time.
A gear reducer can reduce the speed of a motor by a factor of two. The reduction ratio changes the rotation speed of the receiving member. This change in speed is often required to solve problems of inertia mismatch. The torque density of a gear reducer is measured in newton meters and will depend on the motor used. The first criterion is the configuration of the input and output shafts. A gear ratio of 2:1, for example, means that the output speed has been cut in half.
Bevel gear reducers are a good option if the input and output shafts are perpendicular. This type is very robust and is perfect for situations where the angle between two axes is small. However, bevel gear reducers are expensive and require constant maintenance. They are usually used in heavy-duty conveyors and farm equipment. The correct choice of gear reducer for gear motor is crucial for the efficiency and reliability of the mechanism. To get the best gear reducer for your application, talk to a qualified manufacturer today.
Choosing a gear reducer for a gear motor can be tricky. The wrong one can ruin an entire machine, so it’s important to know the specifics. You must know the torque and speed requirements and choose a motor with the appropriate ratio. A gear reducer should also be compatible with the motor it’s intended for. In some cases, a smaller motor with a gear reducer will work better than a larger one.
Motor shaft
Proper alignment of the motor shaft can greatly improve the performance and life span of rotating devices. The proper alignment of motors and driven instruments enhances the transfer of energy from the motor to the instrument. Incorrect alignment leads to additional noise and vibration. It may also lead to premature failure of couplings and bearings. Misalignment also results in increased shaft and coupling temperatures. Hence, proper alignment is critical to improve the efficiency of the driven instrument.
When choosing the correct type of gear train for your motor, you need to consider its energy efficiency and the torque it can handle. A helical geared motor is more efficient for high output torque applications. Depending on the required speed and torque, you can choose between an in-line and a parallel helical geared motor. Both types of gears have their advantages and disadvantages. Spur gears are widespread. They are toothed and run parallel to the motor shaft.
A planetary gear motor can also have a linear output shaft. A stepping motor should not operate at too high current to prevent demagnetization, which will lead to step loss or torque drop. Ensure that the motor and gearbox output shafts are protected from external impacts. If the motor and gearbox are not protected against bumps, they may cause thread defects. Make sure that the motor shafts and rotors are protected from external impacts.
When choosing a metal for your gear motor’s motor shaft, you should consider the cost of hot-rolled bar stock. Its outer layers are more difficult to machine. This type of material contains residual stresses and other problems that make it difficult to machine. For these applications, you should choose a high-strength steel with hard outer layers. This type of steel is cheaper, but it also has size considerations. It’s best to test each material first to determine which one suits your needs.
In addition to reducing the speed of your device, a geared motor also minimizes the torque generated by your machine. It can be used with both AC and DC power. A high-quality gear motor is vital for stirring mechanisms and conveyor belts. However, you should choose a geared motor that uses high-grade gears and provides maximum efficiency. There are many types of planetary gear motors and gears on the market, and it’s important to choose the right one.
First stage gears
The first stage gears of a gear motor are the most important components of the entire device. The motor’s power transmission is 90% efficient, but there are many factors that can affect its performance. The gear ratios used should be high enough to handle the load, but not too high that they are limiting the motor’s speed. A gear motor should also have a healthy safety factor, and the lubricant must be sufficient to overcome any of these factors.
The transmission torque of the gear changes with its speed. The transmission torque at the input side of the gear decreases, transferring a small torque to the output side. The number of teeth and the pitch circle diameters can be used to calculate the torque. The first stage gears of gear motors can be categorized as spur gears, helical gears, or worm gears. These three types of gears have different torque capacities.
The first stage helical gear is the most important part of a gear motor. Its function is to transfer rotation from one gear to the other. Its output is the gearhead. The second stage gears are connected by a carrier. They work in tandem with the first stage gear to provide the output of the gearhead. Moreover, the first stage carrier rotates in the same direction as the input pinion.
Another important component is the output torque of the gearmotor. When choosing a gearmotor, consider the starting torque, running torque, output speed, overhung and shock loads, duty cycles, and more. It is crucial to choose a gearmotor with the right ratio for the application. By choosing the proper gearmotor, you will get maximum performance with minimal operating costs and increase plant productivity. For more information on first stage gears, check out our blog.
The first stage of a gear motor is composed of a set of fixed and rotating sprockets. The first stage of these gears acts as a drive gear. Its rotational mass is a limiting factor for torque. The second stage consists of a rotating shaft. This shaft rotates in the direction of the torque axis. It is also the limiting force for the motor’s torque.
China Best Sales High temperature AC electric Three Phase low rpm Speed Control induction electric Vibrating Motor wholesaler
Warranty: 1 year
Model Number: SOP-120W
Type: Asynchronous Motor
Frequency: 50/60 Hz
Phase: Three-phase
Protect Feature: Totally Enclosed
AC Voltage: 220V/380V
Efficiency: IE 2
rotating speed: 2P
Certification: ce
Packaging Details: To be packed with high quality box
Port: HangZhou or any port in China
Products Description High temperature long axis motorsUsages:Widely used in CZPT reflow soldering machines, wave soldering machines, shoe machines, packaging machinery, kitchen equipment, tunnel furnaces, experimental instruments, oven equipment, high-temperature coating equipment, etc.Specification: 40W 60W 90W 120W 180W 300W 450W 750W 1100W 1500W 2200W product show Features:1. The high temperature resistant motor adopts fashionable aluminum alloy appearance design and beautiful appearance.2. The motor uses high-precision bearing brands, special bearing grease, low noise, low vibration, and long bearing life.3. High-tech design is adopted to reduce the electromagnetic load of the motor and improve the high-performance efficiency of the motor.4. The high temperature resistant motor adopts high temperature resistant H-class insulating material to ensure the safe operation of the motor in a high temperature environment. It will not age or burn out.5. Adopting advanced thermodynamic analysis method for structural design, using unique “motor heat dissipation” design, breaking the traditional exhaust-type heat dissipation method. .6. The shaft is made of chrome steel and stainless steel, which can be customized according to customer requirements. The shaft can be lengthened and shortened (the shaft can be up to 230mm), and the shaft diameter can be up to 26mm (1500W high temperature motor)7. Motor voltage: single-phase 220V, three-phase 220V/380V, 2 poles, other quantities can be customized. Recommend Products Company Profile FAQ Q1: What’s the shipping/freight cost?A1: It depends on the quantities and shipping methods, please contact us for accurate quotation. Q2: What’s the leading time?A2: It takes 7 working days for those in stock, and takes 10-15 working days for those out of stock. Q3: Can you produce special voltage ring blowers? such as 110V and 400V etcA3: Yes, we can. Please contact us freely for more details. Q4: How to choose the model?A4: You need to tell us Air flow, operating pressure, operating mode(vacuum or pressure), motor voltage and frequency, and then we’ll choose you the right one. Q5: How to operate the blower?A5: Connect with wire, and turn on the power, so you can use it directly, about the wiring method, we will tell you how to doaccording to your voltage, so at first , you need to tell us your voltage and phase,its important. Q6: What is the material of your machine , is it oil free?A6: Our machine is aluminum alloy, motor is 100% copper coil. of course, it’s oil free.
What Is a Gear Motor?
A gear motor is an electric motor coupled with a gear train. It uses either DC or AC power to achieve its purpose. The primary benefit of a gear reducer is its ability to multiply torque while maintaining a compact size. The trade-off of this additional torque comes in the form of a reduced output shaft speed and overall efficiency. However, proper gear technology and ratios provide optimum output and speed profiles. This type of motor unlocks the full potential of OEM equipment.
Inertial load
Inertial load on a gear motor is the amount of force a rotating device produces due to its inverse square relationship with its inertia. The greater the inertia, the less torque can be produced by the gear motor. However, if the inertia is too high, it can cause problems with positioning, settling time, and controlling torque and velocity. Gear ratios should be selected for optimal power transfer.
The duration of acceleration and braking time of a gear motor depends on the type of driven load. An inertia load requires longer acceleration time whereas a friction load requires breakaway torque to start the load and maintain it at its desired speed. Too short a time period can cause excessive gear loading and may result in damaged gears. A safe approach is to disconnect the load when power is disconnected to prevent inertia from driving back through the output shaft.
Inertia is a fundamental concept in the design of motors and drive systems. The ratio of mass and inertia of a load to a motor determines how well the motor can control its speed during acceleration or deceleration. The mass moment of inertia, also called rotational inertia, is dependent on the mass, geometry, and center of mass of an object.
Applications
There are many applications of gear motors. They provide a powerful yet efficient means of speed and torque control. They can be either AC or DC, and the two most common motor types are the three-phase asynchronous and the permanent magnet synchronous servomotor. The type of motor used for a given application will determine its cost, reliability, and complexity. Gear motors are typically used in applications where high torque is required and space or power constraints are significant.
There are two types of gear motors. Depending on the ratio, each gear has an output shaft and an input shaft. Gear motors use hydraulic pressure to produce torque. The pressure builds on one side of the motor until it generates enough torque to power a rotating load. This type of motors is not recommended for applications where load reversals occur, as the holding torque will diminish with age and shaft vibration. However, it can be used for precision applications.
The market landscape shows the competitive environment of the gear motor industry. This report also highlights key items, income and value creation by region and country. The report also examines the competitive landscape by region, including the United States, China, India, the GCC, South Africa, Brazil, and the rest of the world. It is important to note that the report contains segment-specific information, so that readers can easily understand the market potential of the geared motors market.
Size
The safety factor, or SF, of a gear motor is an important consideration when selecting one for a particular application. It compensates for the stresses placed on the gearing and enables it to run at maximum efficiency. Manufacturers provide tables detailing typical applications, with multiplication factors for duty. A gear motor with a SF of three or more is suitable for difficult applications, while a gearmotor with a SF of one or two is suitable for relatively easy applications.
The global gear motor market is highly fragmented, with numerous small players catering to various end-use industries. The report identifies various industry trends and provides comprehensive information on the market. It outlines historical data and offers valuable insights on the industry. The report also employs several methodologies and approaches to analyze the market. In addition to providing historical data, it includes detailed information by market segment. In-depth analysis of market segments is provided to help identify which technologies will be most suitable for which applications.
Cost
A gear motor is an electric motor that is paired with a gear train. They are available in AC or DC power systems. Compared to conventional motors, gear reducers can maximize torque while maintaining compact dimensions. But the trade-off is the reduced output shaft speed and overall efficiency. However, when used correctly, a gear motor can produce optimal output and mechanical fit. To understand how a gear motor works, let’s look at two types: right-angle geared motors and inline geared motors. The first two types are usually used in automation equipment and in agricultural and medical applications. The latter type is designed for rugged applications.
In addition to its efficiency, DC gear motors are space-saving and have low energy consumption. They can be used in a number of applications including money counters and printers. Automatic window machines and curtains, glass curtain walls, and banknote vending machines are some of the other major applications of these motors. They can cost up to 10 horsepower, which is a lot for an industrial machine. However, these are not all-out expensive.
Electric gear motors are versatile and widely used. However, they do not work well in applications requiring high shaft speed and torque. Examples of these include conveyor drives, frozen beverage machines, and medical tools. These applications require high shaft speed, so gear motors are not ideal for these applications. However, if noise and other problems are not a concern, a motor-only solution may be the better choice. This way, you can use a single motor for multiple applications.
Maintenance
Geared motors are among the most common equipment used for drive trains. Proper maintenance can prevent damage and maximize their efficiency. A guide to gear motor maintenance is available from WEG. To prevent further damage, follow these maintenance steps:
Regularly check electrical connections. Check for loose connections and torque them to the recommended values. Also, check the contacts and relays to make sure they are not tangled or damaged. Check the environment around the gear motor to prevent dust from clogging the passageway of electric current. A proper maintenance plan will help you identify problems and extend their life. The manual will also tell you about any problems with the gearmotor. However, this is not enough – it is important to check the condition of the gearbox and its parts.
Conduct visual inspection. The purpose of visual inspection is to note any irregularities that may indicate possible problems with the gear motor. A dirty motor may be an indication of a rough environment and a lot of problems. You can also perform a smell test. If you can smell a burned odor coming from the windings, there may be an overheating problem. Overheating can cause the windings to burn and damage.
Reactive maintenance is the most common method of motor maintenance. In this type of maintenance, you only perform repairs if the motor stops working due to a malfunction. Regular inspection is necessary to avoid unexpected motor failures. By using a logbook to document motor operations, you can determine when it is time to replace the gear motor. In contrast to preventive maintenance, reactive maintenance requires no regular tests or services. However, it is recommended to perform inspections every six months.
in Zaragoza Spain sales price shop near me near me shop factory supplier Home Entertainment high speed electric DC brushless 24V motor manufacturer best Cost Custom Cheap wholesaler
guarantees the balance and regularity of the crucial perform of elements. The high exact CNC gear, this kind of as Gradual-feeding wire-reduce machine, jig grinding equipment and electrical discharge machine, assures the leading high quality precision of mould processing, with the high productive and environmental protection acid rolling line currently being the largest uncooked materials converting tools in the area in china The wildly use of automatic milling equipment, substantial-speed automated feeding punch, large speed automated rolling and assembling device guarantees the substantial quality and effectiveness of factors and chain making. A lot more importantly, we make particular areas in accordance to supplied drawings/samples and warmly welcome OEM inquiries. Home EPTrtainment high pace electric dc brushless 24v motor
Principal Features
1 periodOEM solODM 28mm EPT furthermore 380 amp385 permanent magnet DC motor amp28mm brushless motor
two periodSmall dimensions dc EPT motor with minimal speed and big torque
three period28mm EPT motor give 2 period0Nm torque and far more reliable
four periodSuitable to modest diameter comma low sound and massive torque application
five periodDC Gear motor can match encoder comma11ppr
6 periodReduction ratio colon4 comma14 comma19 comma27 comma51 comma71 comma100 comma139 comma189 comma264 comma369 comma516 comma720
| EPT product no period of time | Rated voltage | No-load speed | No-load present | Rated velocity | Rated torque | Rated current | Output EPT | Stall torque | Stall current |
| VDC | r solmin | mA | r solmin | g periodcm | mA | W | g periodcm | A | |
| TRS-385SP-0640 | six | 4000 | 200 | 3250 | forty five | 600 | 1 period6 | 250 | 2 period5 |
| TRS-385SP-1265 | twelve | 6500 | one hundred fifty | 5200 | sixty | five hundred | 3 period2 | 310 | two period0 |
| TRS-385SP-2454 | 24 | 5400 | a hundred | 4000 | sixty | 200 | 2 period5 | 240 | period7 |
Gear motor technical info colon TRS-385SP-0640-xxx
| Reduction ratio | 4 | 19 | 27 | fifty one | 100 | 189 | 264 | 369 | 516 | 720 |
| Length mm | 28 period5 | 36 | 36 | 43 | 43 | fifty | fifty | fifty | fifty | 50 |
| No-load speed rpm | 900 | 190 | 140 | 75 | 38 | twenty | fifteen | eleven | eight | 5 |
| Rated velocity rpm | 810 | 170 | one hundred twenty | 64 | 32 | 17 | twelve | nine | 6 | four |
| Rated torque kg periodcm | period14 | period6 | period9 | 1 period4 | two period7 | four period7 | 6 | eight | 11 | 13 |
| Max periodmomentary tolerance torque kg periodcm | period8 | 3 period3 | four period7 | seven period6 | 15 | 26 | 30 | thirty | thirty | 30 |
Gear motor technical data colon TRS-385SP-1265-xxx
| Reduction ratio | four | 19 | 27 | fifty one | one hundred | 189 | 264 | 369 | 516 | 720 |
| Duration mm | 28 period5 | 36 | 36 | 43 | 43 | 50 | 50 | 50 | 50 | fifty |
| No-load speed rpm | 1500 | 330 | 230 | 120 | 63 | 34 | 23 | sixteen | twelve | 8 |
| Rated velocity rpm | 1300 | 270 | a hundred ninety | a hundred | fifty two | 27 | twenty | 14 | ten | 7 |
| Rated torque kg periodcm | period19 | period8 | one period1 | 1 period8 | 3 period6 | six | 8 | eleven | 15 | seventeen |
| Max periodmomentary tolerance torque kg periodcm | one period0 | 4 period1 | 5 period8 | nine period5 | 19 | 30 | 30 | 30 | thirty | thirty |
Gear motor technical knowledge colon TRS-385SP-2454-xxx
| Reduction ratio | four | 19 | 27 | 51 | one hundred | 189 | 264 | 369 | 516 | 720 |
| Duration mm | 28 period5 | 36 | 36 | forty three | 43 | fifty | fifty | fifty | 50 | fifty |
| No-load velocity rpm | 1250 | 270 | 190 | 100 | fifty | 29 | 20 | 15 | 10 | 8 |
| Rated speed rpm | a thousand | 210 | 150 | 78 | forty | 21 | 15 | 11 | 8 | six |
| Rated torque kg periodcm | period19 | period8 | one period1 | one period8 | three period6 | 6 | eight | eleven | 15 | seventeen |
| Max periodmomentary tolerance torque kg periodcm | period8 | 3 period2 | 4 period5 | 7 period3 | 14 | twenty five | thirty | thirty | 30 | thirty |
Item Software
| Other Applications colon | |
| Enterprise EPTs colon | ATM comma Copiers and Scanners comma Forex Managing comma Stage of Sale comma Printers comma Vending EPTs interval |
| Meals and EPTrage colon | EPTrage Dispensing comma Hand Blenders comma Blenders comma Mixers comma Coffee EPTs comma Foodstuff Processors comma Juicers comma Fryers comma Ice Makers comma Soy Bean Milk Makers interval |
| Home EPTrtainment and Gaming colon | Gaming EPTs comma Video Game titles comma Optical Disk Drives comma RC and EPT Toys period of time |
| Residence Systems colon | Property Ventilation comma Air Purifiers and Dehumidifiers comma Range Hoods comma Washers and Dryers comma Fridges comma Dishwashers comma EPTr Care comma Whirlpool and Spa comma Showers comma Wise Metering comma Espresso EPTs period |
| Garden and XiHu (West Lake) Dis.Hu (West Lake) Dis.den colon | Garden Mowers comma Snow Blowers comma Trimmers comma Leaf Blowers interval |
| Personalized Treatment colon | Hair Chopping comma Hair Treatment comma Massagers period of time |
| EPT Equipment colon | Drills and Drivers comma Sanders comma Grinders comma PoEPTrs comma Saws period of time |
| Digicam and Optical colon | Online video comma Cameras comma Projectors interval |
EPT amp Delivery
EPT colon one carton EPT comma a hundred pieces for each box interval
EPT time colon
DHL colon 3-5 doing work daEPT semi
UPS colon 5-7 functioning days semi
TNT colon 5-7 working times semi
FedEx colon 7-9 working times semi
EMS colon twelve-15 functioning days semi
By Sea colon Is dependent on which place
Our Business
TT EPT lparHK rpar EPT Co period of time comma Ltd has been EPTizing in micro motors comma EPT motors and their respective elements given that 2000 interval
Our products are broadly employed in EPTrtainment systems comma automobiles comma residence and EPT EPTs and resources and a lot of other individuals time period Our items are trusted and EPT-long lasting comma and backed by years of knowledge period We export ninety eight percnt of our output around the world time period
By EPTaging our difficult-won popularity for honesty comma dependability and quality comma TT EPT aims to carry on as a pioneer in the income overEPT by in search of EPT associates period If your organization is an stop-person of micro-motors comma a distributor or an agent comma you should get in touch with us interval We look EPT to getting in a position to function together with you in the close to EPT period
FAQ
Q colon How to get quest
A colon deliver us inquiry rightEPT EPT our quotation rightEPT negotiate information rightEPT validate the sample rightEPT indicator contract soldeposit rightEPT mass generation rightEPT cargo all set rightEPT stability soldelivery rightEPT additional cooperation time period
Q colon How about Sample get quest
A colon Sample is offered for you interval make sure you make contact with us for specifics period Get in touch with us
Q colon Which shipping way is avaliable quest
A colon DHL comma UPS comma FedEx comma TNT comma EMS comma EPT Post commaSea are offered periodThe other delivery waEPTare also obtainable comma make sure you make contact with us if you require ship by the other delivery way time period
Q colon How EPT is the deliver quest
A colon Devliver time is dependent on the amount you buy interval normally it normally takes fifteen-25 doing work times time period
Q colon My package has missing items interval What can I do quest
A colon You should make contact with our support team and we will affirm your orEPTwith the package deal contents periodWe apologize for any inconveniences interval
Q colon How to validate the payment quest
A colon We acknowledge payment by T solT comma PayPal comma the other payment waEPTalso could be recognized commaPlease contact us prior to you pay by the other payment approaches interval Also thirty-50 percnt deposit is accessible comma the stability funds should be paid ahead of delivery period
in Atlanta United States sales price shop near me near me shop factory supplier T, Tdmk Large Size Synchronous Low Speed High Voltage Ball Mill AC Electric Induction Three Phase Motor Tdmk1000-40 2600-1000kw manufacturer best Cost Custom Cheap wholesaler
we offer chromed bar and tubes for hydualic and pheumatic cylinders. Our products are utilized in numerous fields. EPG has been productively certified by ISO9002 Good quality Administration Technique, ISO9001 Top quality Management System, API certificate, ISO/TS16949:2002 and ISO10012 measurement administration system.
This sequence is appropriate to work in this kind of an indoor setting with an altitude not far more than one,000m and a coolant temperature not far more than forty ordmC, with much less dust, and without having vapour, acid, alkali or corrosive/explosive gasoline. The rated voltage is 6000V for this collection, and we can layout with 3000V and 10000Vaccording to the needs from the buyers. Its allowable voltage deviation range is five%, rated source frequency 50Hz and rated EPT factor .9 (guide).
The motor has a cylindrical shaft extension, whose rotation path shall be steady with that on the nameplate, ordinarily anticlockwise when witnessed from the end of amassing ring, and also, we can create the kinds with a clockwise rotation. When a coupling is utilised to hook up the motor and a mill, the motor’s shaft extension shall not bear further radial or aXiHu (West Lake) Dis.al drive. 50hz and rated EPT element .nine (direct).
The collection adopts a stationary controllable silicon exciter.
It is allowed to be directly commenced at entire voltage, when such commencing mode is not allowed owing to the capacity of the EPT grid of a single user, it can be started out at diminished voltage, at this time, the decrease of its starting recent is in direct proportion to its terminal voltage while the decrease of starting torque is in direction to the square of its terminal voltage.
Stator prospects: 6 prospects, respectively U1, V1, W1, U2, V2 amp W2, all of which are led out by a large-voltage cabtyre cable from the terminal clamp at the bottom of the frame, and can be led out by a junction box customized according to client demands.
Pedestal bearing: ring-oiled or merged bearings adopted, installed in between baseboards and underlaid with insulating padding plates to avert shaft present.
Pedestal bearing: ring-oiled or merged bearings adopted, put in among baseboards and underlaid with insulating padding plates to avert shaft present.
Frame: welded by steel plates, foremost-out terminal at the bottom.
Stator: its iron core is produced of EPTd fHangZhou strips stamped with .5mm low-decline silicon metal plate, and is separated by radial duct spacer stator windings adopt formed double-layer brief-pitched coils with an insulation course of EPT or F (temperature increase assessed in accordance to class EPT), that are useful to proEPT services daily life and since winding terminals have been mounted and strapped reliably and processed with solvent-cost-free VPI (EPT strain impregnation) and have long gone via several times of exams for turn-to-switch impulse face up to voltage and withstand voltage to floor, the motor has outstanding and dependable insulation performance, substantial mechanical strength and robust moisture proofing.
Rotor: its magnetic poles created of stamped steel plates which are installed at rotor area yoke with each other with pole coils with an insulation class of EPT or F. When a customer needs to adopt a pneumatic clutch, we can style a revolving shaft or a shaft with punched holes according to customer needs.
The collection is a kind of large-sized 3-section AC synchronous motor mainly utilised to generate mills in mines, incXiHu (West Lake) Dis.Hu (West Lake) Dis. grate ball mill, rod mill and coal mill.
Motor Title: TDMK Mine High Voltage Synchronous Motor
EPT range: 300KW-5000KW
Velocity range: one hundred fifty–500 r/min
Rated voltage: 6000V/10000V/13800V (can also be manufactured into other grade voltages)
Rated frequency: 50HZ/60HZ
EPT issue: .9
Insulation class: F
Temperature increase stage: EPT
MaXiHu (West Lake) Dis.mum torque multiple: 2.
Protection level: IP00/IP21/IP23
Installation method: IM7311
Functioning technique: S1
Excitation mode: static thyristor, other excitation methods can also be used
Link: Y
Cooling approach: IC01. Other types of motors can also be created in accordance to person needs, such as duct ventilation and air and air cooling.
Mine synchronous motor use elevation: no a lot more than 1000m, the motor can be set up according to the needs of temperature measurement, heater, influence safety and other units. The allowable voltage has a deviation assortment of plusmn five%, simply because the EPT issue is ahead of the grid, which has a certain payment effect on the grid. This variety of motor is appropriate for use in environments the place the ambient air temperature does not exceed 40 deg C and there is no serious dust, the minimal ambient air temperature is -fifteen deg C, and there is no corrosive and explosive fuel in the air (which can also be made into a damp heat or high-altitude motor).
TDMK mining synchronous motors have substantial starting torque and high out-of-action torque. The motor has an superior EPT aspect (which enhances grid EPT aspect), high performance, higher balance and higher overload capability, and has the performance that the speed does not change with load.
The motor items made and marketed by our business are utilized in several EPT, such as electric EPT, mining, steel metallurgy, petrochemical, water conservancy, transportation, building resources and several other EPT. The tools for the motor is pump, EPT instrument, enthusiast, mill, crusher, rolling mill, compressor and numerous other EPT products.
Our company’s motor production manufacturing facility adheres to the notion of green, successful and vitality-preserving creation provider, paEPTattention to the harmonious deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ment of inner and external atmosphere, builds environmentally helpful motor manufacturing EPTrprises, strictly implements motor stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd process, and selects substantial-high quality strength-saving resources to make certain the top quality of motor merchandise.
ZCL Electric Motor EPT Co., Ltd. is a organization largely engaged in the manufacture, analysis and deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ment and income of motor goods. The business has many kinds of motor products, incXiHu (West Lake) Dis.Hu (West Lake) Dis. IEC stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd motors. It is a skilled IEC motor company. Connected motor merchandise have passed the merchandise certification in EPT, the United States, Canada, Europe, the Center EPT and other locations, and the items are exported to all in excess of the world. Organizations adhere to the quotfocus on merchandise, services quot organization philosophy, is fully commited to bettering the top quality of protected motor items and providers for customers close to the globe.
in Beirut Lebanon sales price shop near me near me shop factory supplier 50kw 8000rpm High Speed AC Servo Permanent Magnetic Motor manufacturer best Cost Custom Cheap wholesaler
The team has taken element in the creating and revising of ISO/TC100 international chain normal a number of many years in accomplishment and hosted the 16th ISO/TC100 Worldwide yearly assembly in 2004. EPG is a expert maker and exporter that is anxious with the design, growth and production. The new items include a series of large-tech and higher high quality chains and sprockets and gears, this kind of as chains and gearboxes for agricultural machineries, metallurgical chains, escalator phase-chains, large-pace tooth chains, timing chains, self-lubrication chains, amongst which have type substantial speed tooth chain for auto department dynamic box and aerial chains fill in the blanks of chain in China. 50KW 8000RPM Higher Velocity AC Servo Everlasting Magnetic Motor
Item Function
| one | Higher speed assortment from 6000rpm-8000rpm |
| two | High EPT amp higher torque |
| 3 | Substantial efficiency |
| four | Small dimensions |
| five | Minimal noise low vibration |
| 6 | PatEPTd cooling construction |
| 7 | Simple servicing and EPT life time |
| 8 | For the two drinking water / oil cooling options |
Specs
| Motor kind | Voltage (V AC) |
Rated EPT (kW) |
Rated torque (N.m) | Rated speed (rpm) |
Effectiveness (%) |
Support Issue | Insulation | Ingress protection | Pole Amount | Bodyweight (kg) |
Cooling Method | Situation Signal | Installation Method |
| SRPM200M8XW50 | 380 | fifty | sixty | 8000 | 96.3 | one.two | H/F | IP54 | eight | 45 | Oil/H2o Cooled | Optional | EPT35 |
Application
Substantial-velocity Compressors,Enthusiasts,Pumps
About MC Motor
MC Motor EPT Co., Ltd is a top high-tech EPTrprises which focuses on the style, analysis and manufacture of the new era large pace everlasting magnet motors, which are widely employed in EPT, agriculture, mining, creating provider, drinking water-therapy, automotive and other new emerging EPT.
In the past couple of many years, MC Motor prospects a sequence of technological innovations, and created exceptional achievements, incEPTs:
1.Obtains globally reserved mental residence legal rights about approXiHu (West Lake) Dis.mately a single hundred core systems, most of which have been effectively utilized to our motors
two.Reached a lot more than fifty new developed PM large pace motors from 8KW to 200KW, 5000rpm to 24000rpm, which have a lot increased efficiency, EPT density, trustworthiness and scaled-down dimension amp lighter weigEPT than other related PM motor.
three.Kinds mature creation lines and skilled amp outstanding teams of administration, R ampD, marketing and product sales, obtains extremely very good track record from our customers entire world-widely.
MC MOTOR has intercontinental stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd QC administration technique to make sure every generation approach strictly complies with ISO9001-2015.
Shipping and delivery route
one. Sample purchase: our stock cargos L/T 1~three times, personalized forty five~sixty days
2. Mass manufacturing order: fifteen~25 daEPTbased on the quantity
three. EPTy air: we normally consider DHL/FEDEX/UPS/TNT or other door to door provider
four. EPTy sea: LCL/FCL are each okay
Payment strategy
1. we acknowledge T/T, WESTERN UNION, PAYPAL , L/C at sigEPT or ALIEPTAEPTA ASSURANCE
2. 30% deposit, 70% just before transport (Amount much more than 5000USD)
| Motor kind | Voltage (V AC) |
Rated EPT (kW) |
Rated torque (N.m) | Rated pace (rpm) |
Effectiveness (%) |
Service Aspect | Insulation | Ingress safety | Pole Variety | Bodyweight (kg) |
Cooling Technique | Place Signal | Installation Technique |
| SRPM200L8XW37 | 380 | 37 | 60 | 6000 | 96.3 | 1.two | H/F | IP54 | eight | 45 | Oil/H2o Cooled | Resolver | EPT35 |
| SRPM220L8XW75 | 380 | seventy five | a hundred and twenty | 6000 | ninety six.five | 1.2 | H/F | IP54 | 8 | 70 | Oil/H2o Cooled | Resolver | EPT35 |
| SRPM220M8XW100 | 380 | a hundred | a hundred and twenty | 8000 | 96.5 | one.two | H/F | IP54 | eight | 70 | Oil/Water Cooled | Resolver | EPT35 |
FAQ
1.Do you give the samples?
Yes. Our business can give the samples to you.
2.What is your MOQ
Only 1 Personal computer.
three.Can your firm customise the solution in accordance to my requirements?
Of course.Our business can personalize the motor based mostly on buyer requirements.
4.Are you buying and selling business or company ?
We are a manufacturer.
5.Exactly where is your Business tackle?
EPTgang District HangZhou EPT