Tag Archives: high torque gearbox motor

China 29mm High Torque BLDC Geared Motor with Planetary Gearbox motor efficiency

Merchandise Description

Merchandise Description
29mm high torque bldc geared motor with planetary gearbox Technical specs:

Be aware : It’s just the normal technological data for you reference, The specification such as voltage, velocity, torque, shaft can custom-made.

More Particulars:

Rated Voltage:             12V/24V

No Load Pace:           1-1000RPM

Load Torque:                0.03-thirty Nm

Reduction Ratio:           1:3.7-1:720

Output Electricity:               1-3W

Motor Diameter:            29mm

Gearbox Diameter:       28mm

Geared Motor Duration:  107-143mm

Shaft Diameter:             6mm

Shaft Type:                    D-minimize, spherical or keyway

Relevant Goods

Organization Profile
HangZhou CZPT Co. Ltd is a manufacturer and exporter of a variety of of motors with in excess of ten many years knowledge.
Our merchandise ranges contain:
1) DC Brush motor: 6-130mm diameter, .01-1000W output electrical power
two) DC Spur Gear Motor: twelve-110mm diameter, .1-300W output electricity
3) DC Planeary Gear Motor: ten-82mm diameter, .1-100W output power 
4) Brushless DC Motor: 28-110mm, 5-1500W output power 
5) Stepper Motor: NEMA 08 to NEMA 43, Can with gearbox and direct screw
6) Servo Motor: 42mm to 130mm diameter, 50-4000w 
seven) AC Gear Motor: forty nine to 100mm diameter, 6-a hundred and forty output power 

 Production Products

Certifications

Consumer Visit and Fair 

FAQ

Q: What’s your major products?
A:We at present create Brushed Dc Motors, Brushed Dc gear Motors, Planetary Dc Equipment Motors, Brushless Dc Motors, Stepper motors and Ac Motors and many others. You can check the specifications for above motors on our internet site and you can e mail us to recommend essential motors per your specification as well.

Q:How to pick a suitable motor?
A:If you have motor photographs or drawings to present us, or you have thorough specs like voltage, pace, torque, motor measurement, working method of the motor, necessary life time and sounds amount and so forth, make sure you do not wait to let us know, then we can advocate suited motor for every your ask for appropriately.

Q: Do you have personalized services for your regular motors?
A:Yes, we can personalize for every your request for the voltage, pace, torque and shaft dimensions/form. If you need additional wires/cables soldered on the terminal or need to have to add connectors, or capacitors or EMC we can make it too.

Q:Do you have individual design and style service for motors?
A:Yes, we would like to style motors individually for our customers, but it might need to have some CZPT demand and layout demand. 

Q:Can I have samples for tests 1st?
A:Yes, absolutely you can. Soon after confirmed the required motor specs, we will quotation and give a proforma invoice for samples, after we get the payment, we will get a PASS from our account division to continue samples appropriately.

Q:How do you make positive motor quality?
A:We have our possess inspection techniques: for incoming components, we have signed sample and drawing to make positive certified incoming resources for creation approach, we have tour inspection in the method and last inspection to make confident certified items just before delivery.

Q:What’s your lead time?
A:Generally talking, our regular normal solution will want 25-30days, a bit for a longer time for customized items. But we are very adaptable on the direct time, it will relies upon on the specific orders

Q:What is actually your payment phrase?
A:For all our new clients, we will want 40% deposite, 60% paid out ahead of cargo.

Q:When will you reply right after received my inquiries?
A:We will response inside of 24 several hours after get your inquires.

Q:How can I trust you to make certain my money is protected?
A:We are qualified by the third get together SGS and we have exported to above 85 nations around the world up to June.2017. You can check our popularity with our existing customers in your region (if our customers do not brain), or you can order via alibaba to get trade assurance from alibaba to make sure your funds is risk-free.

Q:What is the bare minimum order quantity?
A:Our least get amount is dependent on distinct motor designs, you should electronic mail us to examine. Also, we generally do not settle for personalized use motor orders. 

Q:What is your shipping technique for motors?
A:For samples and packages significantly less than 100kg, we typically recommend specific shipping and delivery For hefty deals, we typically recommend air shipping and delivery or sea transport. But it all relies upon on our customers’ demands.

Q:What certifications do you have?
A:We presently have CE and ROSH certifications.

Q:Can you send me your price tag checklist?
A:Because we have hundreds of distinct goods, and value differs for every different specifications, we are not CZPT to offer a price list. But we can quotation within 24 several hours once received your inquirues to make certain you can get the price tag in time.

Q:Can I visit your organization?
A:Yes, welcome to check out our business, but please let us know at the very least 2 weeks in advance to aid us make sure no other conferences for the duration of the working day you pay a visit to us.

 

Many thanks!

Make contact with Us

HangZhou CZPT Co.,Ltd
Contact Individual: Celia Chen

 
 
 

 
 

 

Any e mail or trademanager inquires will be replied in 24 hrs.

Typical samples can be supply very swiftly(within 10 days)

Customized provider for sort of motor accoring to your requirement

Professional Tchnical assist and Right after-sale service

Sourcing motor areas like gears, encoders, cables, connectors and so on
 

 

 

 

Application: Universal, Industrial, Household Appliances, Power Tools, Robot, Toys, Door Lock, Monitor
Operating Speed: Low Speed
Function: Driving
Casing Protection: Closed Type
Structure and Working Principle: Brushless
Certification: ISO9001, CCC, Ce, RoHS

###

Samples:
US$ 45/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Application: Universal, Industrial, Household Appliances, Power Tools, Robot, Toys, Door Lock, Monitor
Operating Speed: Low Speed
Function: Driving
Casing Protection: Closed Type
Structure and Working Principle: Brushless
Certification: ISO9001, CCC, Ce, RoHS

###

Samples:
US$ 45/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

Dynamic Modeling of a Planetary Motor

A planetary gear motor consists of a series of gears rotating in perfect synchrony, allowing them to deliver torque in a higher output capacity than a spur gear motor. Unlike the planetary motor, spur gear motors are simpler to build and cost less, but they are better for applications requiring lower torque output. That is because each gear carries the entire load. The following are some key differences between the two types of gearmotors.

planetary gear system

A planetary gear transmission is a type of gear mechanism that transfers torque from one source to another, usually a rotary motion. Moreover, this type of gear transmission requires dynamic modeling to investigate its durability and reliability. Previous studies included both uncoupled and coupled meshing models for the analysis of planetary gear transmission. The combined model considers both the shaft structural stiffness and the bearing support stiffness. In some applications, the flexible planetary gear may affect the dynamic response of the system.
In a planetary gear device, the axial end surface of the cylindrical portion is rotatable relative to the separating plate. This mechanism retains lubricant. It is also capable of preventing foreign particles from entering the planetary gear system. A planetary gear device is a great choice if your planetary motor’s speed is high. A high-quality planetary gear system can provide a superior performance than conventional systems.
A planetary gear system is a complex mechanism, involving three moving links that are connected to each other through joints. The sun gear acts as an input and the planet gears act as outputs. They rotate about their axes at a ratio determined by the number of teeth on each gear. The sun gear has 24 teeth, while the planet gears have three-quarters that ratio. This ratio makes a planetary motor extremely efficient.
Motor

planetary gear train

To predict the free vibration response of a planetary motor gear train, it is essential to develop a mathematical model for the system. Previously, static and dynamic models were used to study the behavior of planetary motor gear trains. In this study, a dynamic model was developed to investigate the effects of key design parameters on the vibratory response. Key parameters for planetary gear transmissions include the structure stiffness and mesh stiffness, and the mass and location of the shaft and bearing supports.
The design of the planetary motor gear train consists of several stages that can run with variable input speeds. The design of the gear train enables the transmission of high torques by dividing the load across multiple planetary gears. In addition, the planetary gear train has multiple teeth which mesh simultaneously in operation. This design also allows for higher efficiency and transmittable torque. Here are some other advantages of planetary motor gear trains. All these advantages make planetary motor gear trains one of the most popular types of planetary motors.
The compact footprint of planetary gears allows for excellent heat dissipation. High speeds and sustained performances will require lubrication. This lubricant can also reduce noise and vibration. But if these characteristics are not desirable for your application, you can choose a different gear type. Alternatively, if you want to maintain high performance, a planetary motor gear train will be the best choice. So, what are the advantages of planetary motor gears?

planetary gear train with fixed carrier train ratio

The planetary gear train is a common type of transmission in various machines. Its main advantages are high efficiency, compactness, large transmission ratio, and power-to-weight ratio. This type of gear train is a combination of spur gears, single-helical gears, and herringbone gears. Herringbone planetary gears have lower axial force and high load carrying capacity. Herringbone planetary gears are commonly used in heavy machinery and transmissions of large vehicles.
To use a planetary gear train with a fixed carrier train ratio, the first and second planets must be in a carrier position. The first planet is rotated so that its teeth mesh with the sun’s. The second planet, however, cannot rotate. It must be in a carrier position so that it can mesh with the sun. This requires a high degree of precision, so the planetary gear train is usually made of multiple sets. A little analysis will simplify this design.
The planetary gear train is made up of three components. The outer ring gear is supported by a ring gear. Each gear is positioned at a specific angle relative to one another. This allows the gears to rotate at a fixed rate while transferring the motion. This design is also popular in bicycles and other small vehicles. If the planetary gear train has several stages, multiple ring gears may be shared. A stationary ring gear is also used in pencil sharpener mechanisms. Planet gears are extended into cylindrical cutters. The ring gear is stationary and the planet gears rotate around a sun axis. In the case of this design, the outer ring gear will have a -3/2 planet gear ratio.
Motor

planetary gear train with zero helix angle

The torque distribution in a planetary gear is skewed, and this will drastically reduce the load carrying capacity of a needle bearing, and therefore the life of the bearing. To better understand how this can affect a gear train, we will examine two studies conducted on the load distribution of a planetary gear with a zero helix angle. The first study was done with a highly specialized program from the bearing manufacturer INA/FAG. The red line represents the load distribution along a needle roller in a zero helix gear, while the green line corresponds to the same distribution of loads in a 15 degree helix angle gear.
Another method for determining a gear’s helix angle is to consider the ratio of the sun and planet gears. While the sun gear is normally on the input side, the planet gears are on the output side. The sun gear is stationary. The two gears are in engagement with a ring gear that rotates 45 degrees clockwise. Both gears are attached to pins that support the planet gears. In the figure below, you can see the tangential and axial gear mesh forces on a planetary gear train.
Another method used for calculating power loss in a planetary gear train is the use of an auto transmission. This type of gear provides balanced performance in both power efficiency and load capacity. Despite the complexities, this method provides a more accurate analysis of how the helix angle affects power loss in a planetary gear train. If you’re interested in reducing the power loss of a planetary gear train, read on!

planetary gear train with spur gears

A planetary gearset is a type of mechanical drive system that uses spur gears that move in opposite directions within a plane. Spur gears are one of the more basic types of gears, as they don’t require any specialty cuts or angles to work. Instead, spur gears use a complex tooth shape to determine where the teeth will make contact. This in turn, will determine the amount of power, torque, and speed they can produce.
A two-stage planetary gear train with spur gears is also possible to run at variable input speeds. For such a setup, a mathematical model of the gear train is developed. Simulation of the dynamic behaviour highlights the non-stationary effects, and the results are in good agreement with the experimental data. As the ratio of spur gears to spur gears is not constant, it is called a dedendum.
A planetary gear train with spur gears is a type of epicyclic gear train. In this case, spur gears run between gears that contain both internal and external teeth. The circumferential motion of the spur gears is analogous to the rotation of planets in the solar system. There are four main components of a planetary gear train. The planet gear is positioned inside the sun gear and rotates to transfer motion to the sun gear. The planet gears are mounted on a joint carrier that is connected to the output shaft.
Motor

planetary gear train with helical gears

A planetary gear train with helical teeth is an extremely powerful transmission system that can provide high levels of power density. Helical gears are used to increase efficiency by providing a more efficient alternative to conventional worm gears. This type of transmission has the potential to improve the overall performance of a system, and its benefits extend far beyond the power density. But what makes this transmission system so appealing? What are the key factors to consider when designing this type of transmission system?
The most basic planetary train consists of the sun gear, planet gear, and ring gear elements. The number of planets varies, but the basic structure of planetary gears is similar. A simple planetary geartrain has the sun gear driving a carrier assembly. The number of planets can be as low as two or as high as six. A planetary gear train has a low mass inertia and is compact and reliable.
The mesh phase properties of a planetary gear train are particularly important in designing the profiles. Various parameters such as mesh phase difference and tooth profile modifications must be studied in depth in order to fully understand the dynamic characteristics of a PGT. These factors, together with others, determine the helical gears’ performance. It is therefore essential to understand the mesh phase of a planetary gear train to design it effectively.

China 29mm High Torque BLDC Geared Motor with Planetary Gearbox     motor efficiencyChina 29mm High Torque BLDC Geared Motor with Planetary Gearbox     motor efficiency
editor by czh 2023-01-20

China High Torque BLDC Planetary Gearbox DC Gear Motor dc motor

Solution Description

 

Item Description

 

model Number of poles Stage Rated voltage Rated pace Constant locked-rotor torque Rated torque Rated electrical power Peak torque
Units     VDC RPM N.m N.m W N.m
42BYA075B030C-02 4 three 24 3000 .192 .16 fifty .48

 

product Peak current Torque constant Back EMF Motor length Motor length voltage range Range of rotation bodyweight
Models A Nm/A V/KRPM g.cMoment of inertia mm VDC RPM Kg
42BYA075B030C-02 nine.6 .05 three.947 14.six 134 24~forty eight 1000~3000 1.0 

Product Parameters

Silent stable and reliable for lengthy existence procedure

one.Voltage: 24 VDC
2.Quantity of phases: three
3.Number of amounts: four
4.Line-to-line resistance: 1.45±10%ohms
five.Line-to-line inductance: 1.27±20%mH
six.Rated recent: 3.2A
7.Rated electrical power: 50W
eight.No-load speed: 4300 rpm
9.Insulation class: B
ten.Reduction ratio: 1:58.22
eleven.Output torque: 7.5 N.m
twelve.Output pace: fifty one.5 rpm
thirteen.We can design and style the specific voltage and shaft and so on

US $85-130
/ Piece
|
50 Pieces

(Min. Order)

###

Application: Industrial
Speed: High Speed
Number of Stator: Three-Phase
Function: Driving, Control
Casing Protection: Protection Type
Number of Poles: 8

###

Samples:
US$ 162/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

model Number of poles Phase Rated voltage Rated speed Continuous locked-rotor torque Rated torque Rated power Peak torque
Units     VDC RPM N.m N.m W N.m
42BYA075B030C-02 4 3 24 3000 0.192 0.16 50 0.48

###

model Peak current Torque constant Back EMF Motor length Motor length voltage range Range of rotation weight
Units A Nm/A V/KRPM g.cMoment of inertia mm VDC RPM Kg
42BYA075B030C-02 9.6 0.05 3.947 14.6 134 24~48 1000~3000 1.0 
US $85-130
/ Piece
|
50 Pieces

(Min. Order)

###

Application: Industrial
Speed: High Speed
Number of Stator: Three-Phase
Function: Driving, Control
Casing Protection: Protection Type
Number of Poles: 8

###

Samples:
US$ 162/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

model Number of poles Phase Rated voltage Rated speed Continuous locked-rotor torque Rated torque Rated power Peak torque
Units     VDC RPM N.m N.m W N.m
42BYA075B030C-02 4 3 24 3000 0.192 0.16 50 0.48

###

model Peak current Torque constant Back EMF Motor length Motor length voltage range Range of rotation weight
Units A Nm/A V/KRPM g.cMoment of inertia mm VDC RPM Kg
42BYA075B030C-02 9.6 0.05 3.947 14.6 134 24~48 1000~3000 1.0 

Benefits of a Planetary Motor

If you’re looking for an affordable way to power a machine, consider purchasing a Planetary Motor. These units are designed to provide a massive range of gear reductions, and are capable of generating much higher torques and torque density than other types of drive systems. This article will explain why you should consider purchasing one for your needs. And we’ll also discuss the differences between a planetary and spur gear system, as well as how you can benefit from them.

planetary gears

Planetary gears in a motor are used to reduce the speed of rotation of the armature 8. The reduction ratio is determined by the structure of the planetary gear device. The output shaft 5 rotates through the device with the assistance of the ring gear 4. The ring gear 4 engages with the pinion 3 once the shaft is rotated to the engagement position. The transmission of rotational torque from the ring gear to the armature causes the motor to start.
The axial end surface of a planetary gear device has two circular grooves 21. The depressed portion is used to retain lubricant. This lubricant prevents foreign particles from entering the planetary gear space. This feature enables the planetary gear device to be compact and lightweight. The cylindrical portion also minimizes the mass inertia. In this way, the planetary gear device can be a good choice for a motor with limited space.
Because of their compact footprint, planetary gears are great for reducing heat. In addition, this design allows them to be cooled. If you need high speeds and sustained performance, you may want to consider using lubricants. The lubricants present a cooling effect and reduce noise and vibration. If you want to maximize the efficiency of your motor, invest in a planetary gear hub drivetrain.
The planetary gear head has an internal sun gear that drives the multiple outer gears. These gears mesh together with the outer ring that is fixed to the motor housing. In industrial applications, planetary gears are used with an increasing number of teeth. This distribution of power ensures higher efficiency and transmittable torque. There are many advantages of using a planetary gear motor. These advantages include:
Motor

planetary gearboxes

A planetary gearbox is a type of drivetrain in which the input and output shafts are connected with a planetary structure. A planetary gearset can have three main components: an input gear, a planetary output gear, and a stationary position. Different gears can be used to change the transmission ratios. The planetary structure arrangement gives the planetary gearset high rigidity and minimizes backlash. This high rigidity is crucial for quick start-stop cycles and rotational direction.
Planetary gears need to be lubricated regularly to prevent wear and tear. In addition, transmissions must be serviced regularly, which can include fluid changes. The gears in a planetary gearbox will wear out with time, and any problems should be repaired immediately. However, if the gears are damaged, or if they are faulty, a planetary gearbox manufacturer will repair it for free.
A planetary gearbox is typically a 2-speed design, but professional manufacturers can provide triple and single-speed sets. Planetary gearboxes are also compatible with hydraulic, electromagnetic, and dynamic braking systems. The first step to designing a planetary gearbox is defining your application and the desired outcome. Famous constructors use a consultative modeling approach, starting each project by studying machine torque and operating conditions.
As the planetary gearbox is a compact design, space is limited. Therefore, bearings need to be selected carefully. The compact needle roller bearings are the most common option, but they cannot tolerate large axial forces. Those that can handle high axial forces, such as worm gears, should opt for tapered roller bearings. So, what are the advantages and disadvantages of a helical gearbox?

planetary gear motors

When we think of planetary gear motors, we tend to think of large and powerful machines, but in fact, there are many smaller, more inexpensive versions of the same machine. These motors are often made of plastic, and can be as small as six millimeters in diameter. Unlike their larger counterparts, they have only one gear in the transmission, and are made with a small diameter and small number of teeth.
They are similar to the solar system, with the planets rotating around a sun gear. The planet pinions mesh with the ring gear inside the sun gear. All of these gears are connected by a planetary carrier, which is the output shaft of the gearbox. The ring gear and planetary carrier assembly are attached to each other through a series of joints. When power is applied to any of these members, the entire assembly will rotate.
Compared to other configurations, planetary gearmotors are more complicated. Their construction consists of a sun gear centered in the center and several smaller gears that mesh with the central sun gear. These gears are enclosed in a larger internal tooth gear. This design allows them to handle larger loads than conventional gear motors, as the load is distributed among several gears. This type of motor is typically more expensive than other configurations, but can withstand the higher-load requirements of some machines.
Because they are cylindrical in shape, planetary gear motors are incredibly versatile. They can be used in various applications, including automatic transmissions. They are also used in applications where high-precision and speed are necessary. Furthermore, the planetary gear motor is robust and is characterized by low vibrations. The advantages of using a planetary gear motor are vast and include:
Motor

planetary gears vs spur gears

A planetary motor uses multiple teeth to share the load of rotating parts. This gives planetary gears high stiffness and low backlash – often as low as one or two arc minutes. These characteristics are important for applications that undergo frequent start-stop cycles or rotational direction changes. This article discusses the benefits of planetary gears and how they differ from spur gears. You can watch the animation below for a clearer understanding of how they operate and how they differ from spur gears.
Planetary gears move in a periodic manner, with a relatively small meshing frequency. As the meshing frequency increases, the amplitude of the frequency also increases. The amplitude of this frequency is small at low clearance values, and increases dramatically at higher clearance levels. The amplitude of the frequency is higher when the clearance reaches 0.2-0.6. The amplitude increases rapidly, whereas wear increases slowly after the initial 0.2-0.6-inch-wide clearance.
In high-speed, high-torque applications, a planetary motor is more effective. It has multiple contact points for greater torque and higher speed. If you are not sure which type to choose, you can consult with an expert and design a custom gear. If you are unsure of what type of motor you need, contact Twirl Motor and ask for help choosing the right one for your application.
A planetary gear arrangement offers a number of advantages over traditional fixed-axis gear system designs. The compact size allows for lower loss of effectiveness, and the more planets in the gear system enhances the torque density and capacity. Another benefit of a planetary gear system is that it is much stronger and more durable than its spur-gear counterpart. Combined with its many advantages, a planetary gear arrangement offers a superior solution to your shifting needs.
Motor

planetary gearboxes as a compact alternative to pinion-and-gear reducers

While traditional pinion-and-gear reducer design is bulky and complex, planetary gearboxes are compact and flexible. They are suitable for many applications, especially where space and weight are issues, as well as torque and speed reduction. However, understanding their mechanism and working isn’t as simple as it sounds, so here are some of the key benefits of planetary gearing.
Planetary gearboxes work by using two planetary gears that rotate around their own axes. The sun gear is used as the input, while the planetary gears are connected via a casing. The ratio of these gears is -Ns/Np, with 24 teeth in the sun gear and -3/2 on the planet gear.
Unlike traditional pinion-and-gear reducer designs, planetary gearboxes are much smaller and less expensive. A planetary gearbox is about 50% smaller and weighs less than a pinion-and-gear reducer. The smaller gear floats on top of three large gears, minimizing the effects of vibration and ensuring consistent transmission over time.
Planetary gearboxes are a good alternative to pinion-and-gear drive systems because they are smaller, less complex and offer a higher reduction ratio. Their meshing arrangement is similar to the Milky Way, with the sun gear in the middle and two or more outer gears. They are connected by a carrier that sets their spacing and incorporates an output shaft.
Compared to pinion-and-gear reduces, planetary gearboxes offer higher speed reduction and torque capacity. As a result, planetary gearboxes are small and compact and are often preferred for space-constrained applications. But what about the high torque transfer? If you’re looking for a compact alt

China High Torque BLDC Planetary Gearbox DC Gear Motor     dc motor	China High Torque BLDC Planetary Gearbox DC Gear Motor     dc motor
editor by czh 2022-12-29

China factory 16RP030 16 mm high efficiency motor 12v high torque high speed 130 rpm small planetary gearbox motor car motor

Warranty: 3months-1year
Model Number: 16RP030
Usage: Home Appliance, Beauty instrument, Intelligent Home, Wiper
Sort: Gear MOTOR
Torque: .3~10Kgf.cm
Development: Everlasting Magnet
Commutation: Brush
Safeguard Function: Drip-evidence
Speed(RPM): 1~2000rpm
Continuous Recent(A): .1~.5A
Efficiency: IE 1
Application: Surveillance, sensible curtain, water meter, electric drill
Rated Voltage: 3V, 6V, 9V, 12V, 24V
Direction of rotation: CW, CCW
Gearbox Diameter: sixteen mm
Motor kind: Dc Brush Gear Motor
Brush Sort: 6v Dc Micro Gear Motor
Operate: Pushed Tools
Search phrases: Planetary Dc Motor
Attribute: Prolonged Daily life Time
Product Title: Dc Planetary Equipment Motor
Packaging Specifics: 1. Internal: embeded in Foam pad2. Outer: paced in standard carton
Port: HangZhou, HangZhou, Hongkong

MakerZHUOXI MOTOR, ZX MOTOR
SolutionPlanetary Equipment DC Motor
Gearbox dimension16mm, 22mm, 28mm, 36mm, 42mm etc
Brush motor measurementN20, N30, 030, RE536962RE501455RE536968RE515748 Gasket Package John Deere 4045 Motor 4CYL, 4V Tractor Spare Parts Farm Tractor For John Deere 050, a hundred thirty, a hundred and eighty, 280, three hundred, 310, 370, 385, 395, 520, 3525, 3530, 3540, 545, 555, 775, 5512, 31ZY etc.
BLDC motor sizeBLDC 2418, BLDC 2838, BLDC 3625, BLDC 3650, Changchai Engine parts S195 S1115 diesel motor Governor assembly BLDC 4260 and so forth.
Voltage variety3V, 6V, 9V, 12V, 18V, 24V
Output torque100gf.cm ~ 100kgf.cm
Output speed1rpm ~ 2000rpm
Specification Firm Profile ZHUOXI MOTOR have been devoting to innovate and manufacture micro DC motors and DC Equipment Motors from 2013. With Constant advancement, we have non-public R&D Lab with professional engineers gathered plentiful sensible purposes and provided most appropriate gearbox motors for tailored projects. We have owned standard workshops with 250+ competent employees which has current the Good quality Administration Program ISO9001:2015. Major products: Gearbox motors of Spur DC equipment motor, planetary DC equipment motor, DC worm gear motor, Micro DC motor, Tiny DC Brushless motors etc. Gearbox diameter: 10mm to 100mm Voltage variety: DC 1.5V~36V Output torque: 10gf.cm~100kgf.cm Principal purposes: property appliance, workplace gear, computerized kitchen area & bathroom, instrument & meter, medical appliance, private healthcare, security keep an eye on, electronic digital camera, Agricultural Yoke Tractor Clutch Spline Pto Joint Cardan Shaft Couplings Cross Travel Common Propeller Steel u energy just take off robots, design aeroplance & toys, mini supporter, computerized folding doorways, banking system, electric powered resources, tiny pump, auto child swing and so forth. ZHUOXI MOTOR keeps supplying best services and substantial high quality items, we welcome yourvisit to our manufacturing facility and desire to cooperate with you in close to foreseeable future. Certifications Packing & Supply Advocate Products FAQ Q: Are you investing or producing ?A: We are factory for micro motors and dc gear motors, we can layout and make motors on needs.Q: How to order?A: ship us inquiry → negotiate details → validate the sample with parameter → indicator agreement/deposit → mass creation → cargo all set → harmony/shipping → aftersale serviceQ: How about Sample get?A: We would charge for samples, kindly contact us for particulars.Q: How long is the lead time and transport?A: Normally generation normally takes twenty~35days, and cargo is dependent on your needs.Q: My package deal has missing items. What can I do?A: Make sure you get in touch with our group and we will verify your buy with the package deal contents. We apologize for any inconveniences.Q: How to verify the payment?A: We acknowledge payment by T/T, NMRV Sequence gearbox reduction speed reducer equipment and worm reducer velocity gear motor nmrv gearmotor light-weight industry PayPal, other payment methods also could be accepted. Please make contact with us for specifics prior to you have accomplished.

The Benefits of Using a Gear Motor

A gear motor works on the principle of conservation of angular momentum. As the smaller gear covers more RPM and the larger gear produces more torque, the ratio between the two is greater than one. Similarly, a multiple gear motor follows the principle of energy conservation, with the direction of rotation always opposite to the one that is adjacent to it. It’s easy to understand the concept behind gear motors and the various types available. Read on to learn about the different types of gears and their applications.

Electric motor

The choice of an electric motor for gear motor is largely dependent on the application. There are various motor and gearhead combinations available, and some are more efficient than others. However, it is critical to understand the application requirements and select a motor that meets these needs. In this article, we’ll examine some of the benefits of using a gear motor. The pros and cons of each type are briefly discussed. You can buy new gear motors at competitive prices, but they aren’t the most reliable or durable option for your application.
To determine which motor is best for your application, you’ll need to consider the load and speed requirements. A gear motor’s efficiency (e) can be calculated by taking the input and output values and calculating their relation. On the graph below, the input (T) and output (P) values are represented as dashed lines. The input (I) value is represented as the torque applied to the motor shaft. The output (P) is the amount of mechanical energy converted. A DC gear motor is 70% efficient at 3.75 lb-in / 2,100 rpm.
In addition to the worm gear motor, you can also choose a compact DC worm gear motor with a variable gear ratio from 7.5 to 80. It has a range of options and can be custom-made for your specific application. The 3-phase AC gear motor, on the other hand, works at a rated power of one hp and torque of 1.143.2 kg-m. The output voltage is typically 220V.
Another important factor is the output shaft orientation. There are two main orientations for gearmotors: in-line and offset. In-line output shafts are most ideal for applications with high torque and short reduction ratios. If you want to avoid backlash, choose a right angle output shaft. An offset shaft can cause the output shaft to become excessively hot. If the output shaft is angled at a certain angle, it may be too large or too small.
Motor

Gear reducer

A gear reducer is a special kind of speed reducing motor, usually used in large machinery, such as compressors. These reducers have no cooling fan and are not designed to handle heavy loads. Different purposes require different service factors. For instance, a machine that requires frequent fast accelerations and occasional load spikes needs a gear reducer with a high service factor. A gear reducer that’s designed for long production shifts should be larger than a machine that uses it for short periods of time.
A gear reducer can reduce the speed of a motor by a factor of two. The reduction ratio changes the rotation speed of the receiving member. This change in speed is often required to solve problems of inertia mismatch. The torque density of a gear reducer is measured in newton meters and will depend on the motor used. The first criterion is the configuration of the input and output shafts. A gear ratio of 2:1, for example, means that the output speed has been cut in half.
Bevel gear reducers are a good option if the input and output shafts are perpendicular. This type is very robust and is perfect for situations where the angle between two axes is small. However, bevel gear reducers are expensive and require constant maintenance. They are usually used in heavy-duty conveyors and farm equipment. The correct choice of gear reducer for gear motor is crucial for the efficiency and reliability of the mechanism. To get the best gear reducer for your application, talk to a qualified manufacturer today.
Choosing a gear reducer for a gear motor can be tricky. The wrong one can ruin an entire machine, so it’s important to know the specifics. You must know the torque and speed requirements and choose a motor with the appropriate ratio. A gear reducer should also be compatible with the motor it’s intended for. In some cases, a smaller motor with a gear reducer will work better than a larger one.
Motor

Motor shaft

Proper alignment of the motor shaft can greatly improve the performance and life span of rotating devices. The proper alignment of motors and driven instruments enhances the transfer of energy from the motor to the instrument. Incorrect alignment leads to additional noise and vibration. It may also lead to premature failure of couplings and bearings. Misalignment also results in increased shaft and coupling temperatures. Hence, proper alignment is critical to improve the efficiency of the driven instrument.
When choosing the correct type of gear train for your motor, you need to consider its energy efficiency and the torque it can handle. A helical geared motor is more efficient for high output torque applications. Depending on the required speed and torque, you can choose between an in-line and a parallel helical geared motor. Both types of gears have their advantages and disadvantages. Spur gears are widespread. They are toothed and run parallel to the motor shaft.
A planetary gear motor can also have a linear output shaft. A stepping motor should not operate at too high current to prevent demagnetization, which will lead to step loss or torque drop. Ensure that the motor and gearbox output shafts are protected from external impacts. If the motor and gearbox are not protected against bumps, they may cause thread defects. Make sure that the motor shafts and rotors are protected from external impacts.
When choosing a metal for your gear motor’s motor shaft, you should consider the cost of hot-rolled bar stock. Its outer layers are more difficult to machine. This type of material contains residual stresses and other problems that make it difficult to machine. For these applications, you should choose a high-strength steel with hard outer layers. This type of steel is cheaper, but it also has size considerations. It’s best to test each material first to determine which one suits your needs.
In addition to reducing the speed of your device, a geared motor also minimizes the torque generated by your machine. It can be used with both AC and DC power. A high-quality gear motor is vital for stirring mechanisms and conveyor belts. However, you should choose a geared motor that uses high-grade gears and provides maximum efficiency. There are many types of planetary gear motors and gears on the market, and it’s important to choose the right one.
Motor

First stage gears

The first stage gears of a gear motor are the most important components of the entire device. The motor’s power transmission is 90% efficient, but there are many factors that can affect its performance. The gear ratios used should be high enough to handle the load, but not too high that they are limiting the motor’s speed. A gear motor should also have a healthy safety factor, and the lubricant must be sufficient to overcome any of these factors.
The transmission torque of the gear changes with its speed. The transmission torque at the input side of the gear decreases, transferring a small torque to the output side. The number of teeth and the pitch circle diameters can be used to calculate the torque. The first stage gears of gear motors can be categorized as spur gears, helical gears, or worm gears. These three types of gears have different torque capacities.
The first stage helical gear is the most important part of a gear motor. Its function is to transfer rotation from one gear to the other. Its output is the gearhead. The second stage gears are connected by a carrier. They work in tandem with the first stage gear to provide the output of the gearhead. Moreover, the first stage carrier rotates in the same direction as the input pinion.
Another important component is the output torque of the gearmotor. When choosing a gearmotor, consider the starting torque, running torque, output speed, overhung and shock loads, duty cycles, and more. It is crucial to choose a gearmotor with the right ratio for the application. By choosing the proper gearmotor, you will get maximum performance with minimal operating costs and increase plant productivity. For more information on first stage gears, check out our blog.
The first stage of a gear motor is composed of a set of fixed and rotating sprockets. The first stage of these gears acts as a drive gear. Its rotational mass is a limiting factor for torque. The second stage consists of a rotating shaft. This shaft rotates in the direction of the torque axis. It is also the limiting force for the motor’s torque.

China factory 16RP030 16 mm high efficiency motor 12v high torque high speed 130 rpm small planetary gearbox motor     car motor

in Kagoshima Japan sales price shop near me near me shop factory supplier 3V High Torque Low Rpm Small Transmission Gearbox Motor manufacturer best Cost Custom Cheap wholesaler

  in Kagoshima Japan  sales   price   shop   near me   near me shop   factory   supplier 3V High Torque Low Rpm Small Transmission Gearbox Motor manufacturer   best   Cost   Custom   Cheap   wholesaler

Our merchandise are used in a lot of fields. We have exported our items to Korea, Turkey, Bulgaria, Romania, Russia, Italy, Norway, the Usa, Canada, and many others. Furthermore, all our creation methods are in compliance with ISO9002 requirements. 3V Substantial Torque Low Rpm Little EPT EPT EPT

Product Description:

Product Application Parameters Rated Torque of Gear EPTox Quick Torque of Gear EPTox Equipment Ratio Equipment EPTox Length
L1
Rated At No Load At Rated Load General Length
L
Voltage Velocity Present Pace Present Torque
VDC rpm mA rpm mA gf.cm mN.m mm gf.cm gf.cm mm
ZWEPTPD571571-19 3. 909 70 763 215 24 two.4 27.8 1300 4000 19 twelve.eight
ZWEPTPD571571-28 three. 617 70 518 215 36 3.five 1300 4000 28
ZWEPTPD571571-forty six three. 375 80 315 215 39 three.8 30.9 1300 4000 forty six 15.nine
ZWEPTPD571571-69 3. 250 eighty 210 215 58 5.7 1300 4000 sixty nine
ZWEPTPD571571-102 3. 169 80 142 215 86 eight.4 1300 4000 102
ZWEPTPD571571-151 3. 114 eighty 96 215 127 twelve.five 1300 4000 151
ZWEPTPD571571-168 3. 98 eighty 86 220 106 ten.4 34 1300 4000 168 19
ZWEPTPD571571-249 3. 66 eighty fifty eight 220 158 15 1300 4000 249
ZWEPTPD571571-368 three. 45 eighty 39 220 233 23 1300 4000 368
ZWEPTPD571571-546 3. 30 80 27 220 346 34 1300 4000 546
ZWEPTPD571571-809 3. twenty 80 eighteen 220 512 50 1300 4000 809

previously mentioned requirements just for reference and customizable according to demands.

2nd Drawing

Solution information show:

Application

Intelligent wearable units look at,VR,AR,XR and and many others.
EPT application kitchen appliances, sewing EPTs, corn popper, EPT cleaner, XiHu (West Lake) Dis.Hu (West Lake) Dis.den device, sanitary ware, window curtain, EPT closestool, sweeping robot, EPT seat, stXiHu (West Lake) Dis.Hu (West Lake) Dis. desk, electric powered sofa, Tv, computer, treadmill, spyhole, cooker hood, electric powered drawer, electric mosquito web, EPT cabinet, EPT wardrobe, automatic soap dispenser, EPTbaby bottle sterilizer, lifting sizzling pot cookware, dishwasher, washing EPT, foodstuff breaking EPT, dryer, air conditioning, dustbin, coffee EPT, whisk,intelligent lock,bread maker,Window cleansing robotic and etc.
interaction products 5G foundation station,video conference,cellular mobile phone and and many others.
Workplace EPT equipments scanners, printers, multifunction EPTs copy EPTs, fax (FAX paper cutter), computer peripheral, financial institution EPT, EPT, lifting socket, screen,notebook Personal computer and and so forth.
Automotive goods conditioning damper actuator, vehicle DVD,doorway lock actuator, retractable rearview mirror, meters, optic aXiHu (West Lake) Dis.s handle gadget, head ligEPT beam amount adjuster, car water pump, automobile antenna, lumbar help, EPEPT, car tail gate electric putter, HUD, head-up display, vehicle sunroof, EPS, AGS, automobile window, head restraint, E-booster, auto seat, motor vehicle charging station and and many others.
ToEPTand versions radio management design, computerized cruise manage, ride-on toy, instructional robot, programming robot, medical robot, automatic feeder, EPT building blocks, escort robot and and so forth.
Health-related equipments blood strain meter, breath EPT, healthcare cleansing pump, healthcare bed, blood stress screens, medical ventilator, surgical staplers, infusion pump, dental instrument, self-clotting cutter, wound cleaning pump for orthopedic medical procedures,digital ciXiHu (West Lake) Dis.Hu (West Lake) Dis.ette, eyebrow pencil,fascia gun, , surgical robot,laboratory EPT and and so on.
EPTs movement handle valves, seismic tests,automated reclosing,Agricultural unmanned aerial automobile,automatic feeEPT,EPT convey cabinet and and many others.
Electric EPT tools electrical drill, screwdriver,XiHu (West Lake) Dis.Hu (West Lake) Dis.den instrument and etc.
EPT devices optics instruments,automatic vending EPT, wire-stripping EPT and and so on.
Personalized treatment tooth brush, hair clipper, electric shaver, massager, vibrator, hair dryer, rubdown EPT, scissor hair EPT, foot grinder,anti-myopia pen, facial attractiveness tools, hair curler,Electric powered threading knife,EPT Best PORE, Puff EPT,eyebrow tweezers and etc.
Buyer electronics camera, mobile mobile phone,EPT camera, computerized retracting unit,camcorder, kinescope DVD,headphone stereo, cassette EPT recorder, bluetooth earbEPTcharging case, turntable, tablet,UAV(unmanned aerial vehicle),surveillance digicam,PTZ camera, rotating smart sEPTer and etc.
robots academic robotic, programming robotic, healthcare robotic, escort robot and and so forth.

Our Providers:

  • ODM amp OEM
  • EPT design and deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ment
  • Relevant EPT assistance

EPT amp EPT

1) EPT Particulars

packed in EPT firstly, then carton, and then bolstered with picket situation for outer EPT.
Or in accordance to client’s need.

two) EPT Specifics

samples will be transported in 10 days
batch orEPTleading time according to the genuine circumstance.

Company Data:

HangEPT ZHEPTWEI EPTry amp Electronics Co., Ltd was estabEPTd in 2001,We give the overall drive remedy for clients from style, tooling fabrication, factors manufacturing and assembly.

one) Competitive Advantages

  • 1) Competitive Benefits
    19 12 months knowledge in producing motor EPT
    We give technological support from r ampd, prototype, testing, assembly and serial production , ODM ampOEM
    Aggressive Price tag
    Solution Overall performance: Reduced noise, High performance, EPT lifespan
    Prompt Shipping and delivery: fifteen doing work daEPTafter payment
    Tiny Orders Acknowledged

2) Primary EPT

  • EPT reduction EPT and its diameter:3.4mm-38mm,voltage:1.5-24V,EPT: .01-40W,output pace:5-2000rpm and output torque:1. gf.cm -50kgf.cm,

  • Custom-made worm and equipment EPT EPTry
  • Specific EPT movement module
  • Exact ingredient and assembly of plastic and steel powEPTinjection.

Certifications

We Have passed to hold ISO9001:2015(CN11/3571),ISO14001:2004(U006616E0153R3M), ISO13485:2016(CN18/42018) and IATF16949:2016(CN11/3571.01).

and more…

FAQ

one. Can you make the EPT with custom technical specs?
Of course. We have style and deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ment team, also a great expression of engineers, each and every of them have
numerous function several years expertise.

two.Do you give the samples?
Yes. Our company can give the samples to you, and the supply time is about 5-15daEPTaccording to the specification of EPT you need to have.

three.What is your MOQ?
Our MOQ is 2000pcs. EPTut at the beginning of our business, we accept small buy.

four. Do you have the item in inventory?
I am sorry we donot have the item in inventory, All products are produced with orders.

five. Do you offer EPT assist?
Yes. Our firm have style and deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ment group, we can supply EPT assist if you
want.

six.How to ship to us?
We will ship the merchandise to you according to the DHL or UPS or FEDEX etc account you supply.

7.How to pay the cash?
We take T/T EPT. Also we have different financial institution account for getting cash, like US dollors or RMEPT etc.

8. How can I know the merchandise is suited for me?
Frist, you want to give us the much more specifics details about the solution. We will recommend the product to you according to your requirement of specification. Soon after you validate, we will get ready the samples to you. also we will provide some excellent EPTs in accordance to your solution use.

nine. Can I occur to your organization to go to?
Indeed, you can occur to our firm to visit at at any time, and welcome to pay a visit to our firm.

10. How do speak to us ?
Remember to send an inquiry

  in Kagoshima Japan  sales   price   shop   near me   near me shop   factory   supplier 3V High Torque Low Rpm Small Transmission Gearbox Motor manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Kagoshima Japan  sales   price   shop   near me   near me shop   factory   supplier 3V High Torque Low Rpm Small Transmission Gearbox Motor manufacturer   best   Cost   Custom   Cheap   wholesaler