Tag Archives: air conditioner motor

China manufacturer Cbb65 Sh Capacitor AC Compressor Air Conditioner Parts Motor Capacitors High Quality vacuum pump distributors

Product Description

Recommend view more >>

Model Number:	CBB65 air conditioner capacitor
Type	Polypropylene film capacitor
Safety approvals:	CQC/VDE/TUV/CL
Approval standard	GB/T3667,EN65712
Climatic category	25/70/21,25/85/21,40/70/21,40/85/21
Rated voltage	150VAC~600VAC(50-60Hz)
Capacitance range	3uf~100uf
Capacitance tolerance	+_5%(J),+_10%(K),+10%(U),-5%(U)
Testing voltage
Between terminals	2*Un(VAC)/5s
Between terminals and case	2*Un+1000(VAC)/5s(>=2000VAC)
Insulation Resistance(20)
Between terminals	>=2000MΩ,UF(500VDC,5s)
Tangent of loss angle(20)	<=0.002(100Hz)
Class of safety protection	S0/S3
Fault Currency	10,000AFC(UL810)
Place of CHINAMFG	CHINA
Packing	More pieces in 1 inner box or polybag as customer request.
Color	accept customization
Supplier type	OEM factory

Capacitance(uf)	250/300VAC					400-450VAC
	Cylindrical			Ocal	Cylindrical		Ocal
	D	H	LWH	H	D	LWH
10uf	40	55	51.531.565	30	60	51.531.565
15uf	40	55	51.531.565	35	60	/
20uf	40	65	51.531.565	40	60	51.531.575
25uf	40	65	51.531.565	40	60	51.531.585
30uf	/	/	/	40	70	71.54575
35uf	40	75	71.54575	45	70	/
40uf	/	/	/	45	70	71.54585
45uf	45	75	71.54575	45	80	/
50uf	45	85	71.54585	45	90	71.545100
60uf	45	95	71.545100	50	90	/

What’s a dual run AC capacitor ?
* A capacitor is an electric component that temporarily stores an electrical charge and AC capacitor is a key component to start
air conditioner motors.
* A dual run capacitor supports “TWO” electric motors, 1 section for the condenser fan motor and the other for the compressor
motor. Beacause of technological innovation, the dual run capacitor can saves space by combining 2 capacitors into 1 case.
* Round cylinder-shaped dual run capacitors are commonly used for air conditioning, it can help in the starting of the compressor
and the condenser fan motor.
* Air conditioner capacitor is small in size, lightweight, heat resisting and anti-explosion.

Dual capacitors come in a variety of sizes, depending on the capacitance (µF or MFD) and the voltage.

1. The capacitance (µF or MFD) must be the same or stay within ±6% of its original value. Example: 45 µF cap can be substituted
by 42.3 to 47.7 µF with the same or better voltage ratings capacitor .
2. A 440 volt capacitor can be used in place of a 370 volt capacitor, as it can work better, but the 370 volt capacitor can’t be
used in place of a 440 volt capacitor.It will work for a while or will fail prematurely, because exceeding the capacitor’s
rated voltage will cause the dielectric to break down and the capacitor to short out.

“TIME” to Replace
The Dual Run AC Capacitor needs to be replaced when the following conditions occur:

1. The fan wouldn’t spin – the condenser fan motor maybe died.
2. The air conditioner is making humming sound, but no air flow.
3. Air conditioner stopped cooling – the compressor in the condenser maybe not coming on.

“SUPER EASY” to Install

* First, Shut off power to the A/C at both the thermostat and the breaker box. Secondly, taking out the capacitor.
* What’s important, make sure you know which wire is for which terminal – 3 terminals on the top are labeled “Herm”/”H” for
the compressor motor, “Fan”/”F” for the fan and “C” for the common line.
* Direct replacement, no need to change wiring or adapter.
* Last but not least, self-install will save you a substantial amount of money!

What is a starting capacitor and a running capacitor for a motor?
As we all know, a single-phase AC motor is not like a three-phase motor. It can turn when it is powered. It needs a starting torque to rotate, and the clockwise and anti-clockwise of this torque determines the steering of the motor, and there are many
ways to start. Among them, the capacitor start is one, which is customarily called the start capacitor, and the single-phase motor needs it to rotate smoothly.
However, some single-phase motors have more than 1 capacitor, and some motors have 2 capacitors. Why? Because some motors are equipped with a starting capacitor and a running capacitor, what is going on?
The difference between start capacitors and run capacitors.
Running capacitor: It is connected to the secondary winding to form an alternating magnetic field after phase-shifting the alternating current, and forms an approximately circular elliptical rotating magnetic field with the alternating magnetic field of the main winding. So he can be the same capacitor, but its role is different.
No matter what kind of capacitor, it has a starting effect at the beginning of the motor. However, when the motor reaches about 75% of the rated speed, the starting capacitor is automatically disconnected by the centrifugal switch, and the running capacitor continues to work with the motor. The process of starting the motor is actually the process of “column phase”. Because a single-phase motor is different from a three-phase motor, there is no phase difference, and a rotating magnetic field cannot be generated. The function of the capacitor is to make the starting winding current of the motor lead the running winding by 90 electrical angles in time and space to form a phase difference. Among them, the running capacitor also plays the role of balancing the current between the main and auxiliary windings. Since the starting capacitor works for an instant and a short time, the withstand voltage is required to be above 250V, while the running capacitor needs to work for a long time, and the withstand voltage is required to be above 450V.
The starting capacitor is to make the starting coil of the single-phase motor energized at the time of starting, and then cut off after starting. The running capacitor is to make the motor perform capacitance compensation during the operation, so the starting capacitor cannot be less, and the running capacitor can not be used.
The running capacitor is the starting capacitor used when the press is working normally. When the press starts, it starts the press together with the running capacitor. After the press is turned up, the start capacitor is disconnected. The running and starting capacitors are together, but 1 of the starting capacitors is open, and the starting capacitor is useless when the motor turns. What is the difference between the starting capacitor and the running capacitor? That is the capacity of the starting capacitor is large, generally 2-5 times that of the running capacitor, while the capacity of the running capacitor is small, and the capacity difference between the 2 is huge and easy to distinguish.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application:	Home
Certification:	ISO9001, CE, CCC, RoHS
Type:	Polypropylene Film Capacitor

Samples:	US$ 0.01/Piece 1 Piece(Min.Order) \| Order Sample

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

induction motor

What role do AC motors play in HVAC (heating, ventilation, and air conditioning) systems?

In HVAC (heating, ventilation, and air conditioning) systems, AC motors play a crucial role in various components and functions. These motors are responsible for powering fans, compressors, pumps, and other essential equipment within the HVAC system. Let’s explore the specific roles of AC motors in HVAC systems:

Air Handling Units (AHUs) and Ventilation Systems: AC motors drive the fans in AHUs and ventilation systems. These fans draw in fresh air, circulate air within the building, and exhaust stale air. The motors provide the necessary power to move air through the ductwork and distribute it evenly throughout the space. They play a key role in maintaining proper indoor air quality, controlling humidity, and ensuring adequate ventilation.
Chillers and Cooling Towers: HVAC systems that use chillers for cooling rely on AC motors to drive the compressor. The motor powers the compressor, which circulates refrigerant through the system, absorbing heat from the indoor environment and releasing it outside. AC motors are also used in cooling towers, which dissipate heat from the chiller system by evaporating water. The motors drive the fans that draw air through the cooling tower and enhance heat transfer.
Heat Pumps: AC motors are integral components of heat pump systems, which provide both heating and cooling. The motor drives the compressor in the heat pump, enabling the transfer of heat between the indoor and outdoor environments. During cooling mode, the motor circulates refrigerant to extract heat from indoors and release it outside. In heating mode, the motor reverses the refrigerant flow to extract heat from the outdoor air or ground and transfer it indoors.
Furnaces and Boilers: In heating systems, AC motors power the blowers or fans in furnaces and boilers. The motor drives the blower to distribute heated air or steam throughout the building. This helps maintain a comfortable indoor temperature and ensures efficient heat distribution in the space.
Pumps and Circulation Systems: HVAC systems often incorporate pumps for water circulation, such as in hydronic heating or chilled water systems. AC motors drive these pumps, providing the necessary pressure to circulate water or other heat transfer fluids through the system. The motors ensure efficient flow rates and contribute to the effective transfer of thermal energy.
Dampers and Actuators: AC motors are used in HVAC systems to control airflow and regulate the position of dampers and actuators. These motors enable the adjustment of airflow rates, temperature control, and zone-specific climate control. By modulating the motor speed or position, HVAC systems can achieve precise control of air distribution and temperature in different areas of a building.

AC motors in HVAC systems are designed to meet specific performance requirements, such as variable speed control, energy efficiency, and reliable operation under varying loads. Maintenance and regular inspection of these motors are essential to ensure optimal performance, energy efficiency, and longevity of the HVAC system.

In conclusion, AC motors play vital roles in HVAC systems by powering fans, compressors, pumps, and actuators. They enable proper air circulation, temperature control, and efficient transfer of heat, contributing to the overall comfort, air quality, and energy efficiency of buildings.

induction motor

Are there energy-saving technologies or features available in modern AC motors?

Yes, modern AC motors often incorporate various energy-saving technologies and features designed to improve their efficiency and reduce power consumption. These advancements aim to minimize energy losses and optimize motor performance. Here are some energy-saving technologies and features commonly found in modern AC motors:

High-Efficiency Designs: Modern AC motors are often designed with higher efficiency standards compared to older models. These motors are built using advanced materials and optimized designs to reduce energy losses, such as resistive losses in motor windings and mechanical losses due to friction and drag. High-efficiency motors can achieve energy savings by converting a higher percentage of electrical input power into useful mechanical work.
Premium Efficiency Standards: International standards and regulations, such as the NEMA Premium® and IE (International Efficiency) classifications, define minimum energy efficiency requirements for AC motors. Premium efficiency motors meet or exceed these standards, offering improved efficiency compared to standard motors. These motors often incorporate design enhancements, such as improved core materials, reduced winding resistance, and optimized ventilation systems, to achieve higher efficiency levels.
Variable Frequency Drives (VFDs): VFDs, also known as adjustable speed drives or inverters, are control devices that allow AC motors to operate at variable speeds by adjusting the frequency and voltage of the electrical power supplied to the motor. By matching the motor speed to the load requirements, VFDs can significantly reduce energy consumption. VFDs are particularly effective in applications where the motor operates at a partial load for extended periods, such as HVAC systems, pumps, and fans.
Efficient Motor Control Algorithms: Modern motor control algorithms, implemented in motor drives or control systems, optimize motor operation for improved energy efficiency. These algorithms dynamically adjust motor parameters, such as voltage, frequency, and current, based on load conditions, thereby minimizing energy wastage. Advanced control techniques, such as sensorless vector control or field-oriented control, enhance motor performance and efficiency by precisely regulating the motor’s magnetic field.
Improved Cooling and Ventilation: Effective cooling and ventilation are crucial for maintaining motor efficiency. Modern AC motors often feature enhanced cooling systems, including improved fan designs, better airflow management, and optimized ventilation paths. Efficient cooling helps prevent motor overheating and reduces losses due to heat dissipation. Some motors also incorporate thermal monitoring and protection mechanisms to avoid excessive temperatures and ensure optimal operating conditions.
Bearings and Friction Reduction: Friction losses in bearings and mechanical components can consume significant amounts of energy in AC motors. Modern motors employ advanced bearing technologies, such as sealed or lubrication-free bearings, to reduce friction and minimize energy losses. Additionally, optimized rotor and stator designs, along with improved manufacturing techniques, help reduce mechanical losses and enhance motor efficiency.
Power Factor Correction: Power factor is a measure of how effectively electrical power is being utilized. AC motors with poor power factor can contribute to increased reactive power consumption and lower overall power system efficiency. Power factor correction techniques, such as capacitor banks or power factor correction controllers, are often employed to improve power factor and minimize reactive power losses, resulting in more efficient motor operation.

By incorporating these energy-saving technologies and features, modern AC motors can achieve significant improvements in energy efficiency, leading to reduced power consumption and lower operating costs. When considering the use of AC motors, it is advisable to select models that meet or exceed recognized efficiency standards and consult manufacturers or experts to ensure the motor’s compatibility with specific applications and energy-saving requirements.

induction motor

What is an AC motor, and how does it differ from a DC motor?

An AC motor, also known as an alternating current motor, is a type of electric motor that operates on alternating current. It converts electrical energy into mechanical energy through the interaction of magnetic fields. AC motors are widely used in various applications, ranging from household appliances to industrial machinery. Here’s a detailed explanation of what an AC motor is and how it differs from a DC motor:

AC Motor:

An AC motor consists of two main components: the stator and the rotor. The stator is the stationary part of the motor and contains the stator windings. These windings are typically made of copper wire and are arranged in specific configurations to create a rotating magnetic field when energized by an alternating current. The rotor, on the other hand, is the rotating part of the motor and is typically made of laminated steel cores with conducting bars or coils. The rotor windings are connected to a shaft, and their interaction with the rotating magnetic field produced by the stator causes the rotor to rotate.

The operation of an AC motor is based on the principles of electromagnetic induction. When the stator windings are energized with an AC power supply, the changing magnetic field induces a voltage in the rotor windings, which in turn creates a magnetic field. The interaction between the rotating magnetic field of the stator and the magnetic field of the rotor produces a torque, causing the rotor to rotate. The speed of rotation depends on the frequency of the AC power supply and the number of poles in the motor.

DC Motor:

A DC motor, also known as a direct current motor, operates on direct current. Unlike an AC motor, which relies on the interaction of magnetic fields to generate torque, a DC motor uses the principle of commutation to produce rotational motion. A DC motor consists of a stator and a rotor, similar to an AC motor. The stator contains the stator windings, while the rotor consists of a rotating armature with coils or permanent magnets.

In a DC motor, when a direct current is applied to the stator windings, a magnetic field is created. The rotor, either through the use of brushes and a commutator or electronic commutation, aligns itself with the magnetic field and begins to rotate. The direction of the current in the rotor windings is continuously reversed to ensure continuous rotation. The speed of a DC motor can be controlled by adjusting the voltage applied to the motor or by using electronic speed control methods.

Differences:

The main differences between AC motors and DC motors are as follows:

Power Source: AC motors operate on alternating current, which is the standard power supply in most residential and commercial buildings. DC motors, on the other hand, require direct current and typically require a power supply that converts AC to DC.
Construction: AC motors and DC motors have similar construction with stators and rotors, but the design and arrangement of the windings differ. AC motors generally have three-phase windings, while DC motors can have either armature windings or permanent magnets.
Speed Control: AC motors typically operate at fixed speeds determined by the frequency of the power supply and the number of poles. DC motors, on the other hand, offer more flexibility in speed control and can be easily adjusted over a wide range of speeds.
Efficiency: AC motors are generally more efficient than DC motors. AC motors can achieve higher power densities and are often more suitable for high-power applications. DC motors, however, offer better speed control and are commonly used in applications that require precise speed regulation.
Applications: AC motors are widely used in applications such as industrial machinery, HVAC systems, pumps, and compressors. DC motors find applications in robotics, electric vehicles, computer disk drives, and small appliances.

In conclusion, AC motors and DC motors differ in their power source, construction, speed control, efficiency, and applications. AC motors rely on the interaction of magnetic fields and operate on alternating current, while DC motors use commutation and operate on direct current. Each type of motor has its advantages and is suited for different applications based on factors such as power requirements, speed control needs, and efficiency considerations.

China manufacturer Cbb65 Sh Capacitor AC Compressor Air Conditioner Parts Motor Capacitors High Quality vacuum pump distributors
editor by CX 2024-04-26

China best AC Condenser Universal Fan Motor Rd-310-45-8K Air Conditioner Indoor Fan Motor with Hot selling

Product Description

Q: I want to know more details, what to do?
A: Please send us an inquiry with your email address if you seldom use Made-in-China, or just press the button chatting online, We are here for you.
Q: If I want a sample, Can I get it?
A: Of course, most of our products can require a sample, if you need one, pls don’t hesitate to tell us.
Q: I want my logo on the products, What do I want to do?
A: You can get your logo in the products, which will be the smallest quantity to you, and if you feel okay pls send us your design, we can check for you if this logo is free in the arrangement.
Q: What other products do you have?
A: We do all HVAC&R parts, such as capacitors, compressors, service tools, brackets, copper tubes, split valves, fittings, etc…if you are interested, you can have a look at our website.
Q: Which transportation way can I use?
A: Dear, you can choose as you like, considering what you think is more important, as time or cost. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application:	Air-Conditioning
Speed:	Constant Speed
Number of Stator:	Single-Phase

Samples:	US$ 100/Piece 1 Piece(Min.Order) \| Order Sample

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

induction motor

What role do AC motors play in HVAC (heating, ventilation, and air conditioning) systems?

Air Handling Units (AHUs) and Ventilation Systems: AC motors drive the fans in AHUs and ventilation systems. These fans draw in fresh air, circulate air within the building, and exhaust stale air. The motors provide the necessary power to move air through the ductwork and distribute it evenly throughout the space. They play a key role in maintaining proper indoor air quality, controlling humidity, and ensuring adequate ventilation.
Chillers and Cooling Towers: HVAC systems that use chillers for cooling rely on AC motors to drive the compressor. The motor powers the compressor, which circulates refrigerant through the system, absorbing heat from the indoor environment and releasing it outside. AC motors are also used in cooling towers, which dissipate heat from the chiller system by evaporating water. The motors drive the fans that draw air through the cooling tower and enhance heat transfer.
Heat Pumps: AC motors are integral components of heat pump systems, which provide both heating and cooling. The motor drives the compressor in the heat pump, enabling the transfer of heat between the indoor and outdoor environments. During cooling mode, the motor circulates refrigerant to extract heat from indoors and release it outside. In heating mode, the motor reverses the refrigerant flow to extract heat from the outdoor air or ground and transfer it indoors.
Furnaces and Boilers: In heating systems, AC motors power the blowers or fans in furnaces and boilers. The motor drives the blower to distribute heated air or steam throughout the building. This helps maintain a comfortable indoor temperature and ensures efficient heat distribution in the space.
Pumps and Circulation Systems: HVAC systems often incorporate pumps for water circulation, such as in hydronic heating or chilled water systems. AC motors drive these pumps, providing the necessary pressure to circulate water or other heat transfer fluids through the system. The motors ensure efficient flow rates and contribute to the effective transfer of thermal energy.
Dampers and Actuators: AC motors are used in HVAC systems to control airflow and regulate the position of dampers and actuators. These motors enable the adjustment of airflow rates, temperature control, and zone-specific climate control. By modulating the motor speed or position, HVAC systems can achieve precise control of air distribution and temperature in different areas of a building.

induction motor

What are the safety considerations when working with or around AC motors?

Working with or around AC motors requires careful attention to safety to prevent accidents, injuries, and electrical hazards. Here are some important safety considerations to keep in mind:

Electrical Hazards: AC motors operate on high voltage electrical systems, which pose a significant electrical hazard. It is essential to follow proper lockout/tagout procedures when working on motors to ensure that they are de-energized and cannot accidentally start up. Only qualified personnel should perform electrical work on motors, and they should use appropriate personal protective equipment (PPE), such as insulated gloves, safety glasses, and arc flash protection, to protect themselves from electrical shocks and arc flash incidents.
Mechanical Hazards: AC motors often drive mechanical equipment, such as pumps, fans, or conveyors, which can present mechanical hazards. When working on or near motors, it is crucial to be aware of rotating parts, belts, pulleys, or couplings that can cause entanglement or crushing injuries. Guards and safety barriers should be in place to prevent accidental contact with moving parts, and proper machine guarding principles should be followed. Lockout/tagout procedures should also be applied to the associated mechanical equipment to ensure it is safely de-energized during maintenance or repair.
Fire and Thermal Hazards: AC motors can generate heat during operation, and in some cases, excessive heat can pose a fire hazard. It is important to ensure that motors are adequately ventilated to dissipate heat and prevent overheating. Motor enclosures and cooling systems should be inspected regularly to ensure proper functioning. Additionally, combustible materials should be kept away from motors to reduce the risk of fire. If a motor shows signs of overheating or emits a burning smell, it should be immediately shut down and inspected by a qualified professional.
Proper Installation and Grounding: AC motors should be installed and grounded correctly to ensure electrical safety. Motors should be installed according to manufacturer guidelines, including proper alignment, mounting, and connection of electrical cables. Adequate grounding is essential to prevent electrical shocks and ensure the safe dissipation of fault currents. Grounding conductors, such as grounding rods or grounding straps, should be properly installed and regularly inspected to maintain their integrity.
Safe Handling and Lifting: AC motors can be heavy and require proper handling and lifting techniques to prevent musculoskeletal injuries. When moving or lifting motors, equipment such as cranes, hoists, or forklifts should be used, and personnel should be trained in safe lifting practices. It is important to avoid overexertion and use proper lifting tools, such as slings or lifting straps, to distribute the weight evenly and prevent strain or injury.
Training and Awareness: Proper training and awareness are critical for working safely with or around AC motors. Workers should receive training on electrical safety, lockout/tagout procedures, personal protective equipment usage, and safe work practices. They should be familiar with the specific hazards associated with AC motors and understand the appropriate safety precautions to take. Regular safety meetings and reminders can help reinforce safe practices and keep safety at the forefront of everyone’s minds.

It is important to note that the safety considerations mentioned above are general guidelines. Specific safety requirements may vary depending on the motor size, voltage, and the specific workplace regulations and standards in place. It is crucial to consult relevant safety codes, regulations, and industry best practices to ensure compliance and maintain a safe working environment when working with or around AC motors.

induction motor

What is an AC motor, and how does it differ from a DC motor?

AC Motor:

DC Motor:

Differences:

The main differences between AC motors and DC motors are as follows:

Power Source: AC motors operate on alternating current, which is the standard power supply in most residential and commercial buildings. DC motors, on the other hand, require direct current and typically require a power supply that converts AC to DC.
Construction: AC motors and DC motors have similar construction with stators and rotors, but the design and arrangement of the windings differ. AC motors generally have three-phase windings, while DC motors can have either armature windings or permanent magnets.
Speed Control: AC motors typically operate at fixed speeds determined by the frequency of the power supply and the number of poles. DC motors, on the other hand, offer more flexibility in speed control and can be easily adjusted over a wide range of speeds.
Efficiency: AC motors are generally more efficient than DC motors. AC motors can achieve higher power densities and are often more suitable for high-power applications. DC motors, however, offer better speed control and are commonly used in applications that require precise speed regulation.
Applications: AC motors are widely used in applications such as industrial machinery, HVAC systems, pumps, and compressors. DC motors find applications in robotics, electric vehicles, computer disk drives, and small appliances.

China best AC Condenser Universal Fan Motor Rd-310-45-8K Air Conditioner Indoor Fan Motor with Hot selling
editor by CX 2024-04-23

China Hot selling Cbcbb65 450V AC Motor Run Capacitor 30UF 35UF 40UF 45UF 50UF 55UF 60UF 65UF for Air Conditioner vacuum pump diy

Product Description

Recommend view more >>

Model Number:	CBB65 air conditioner capacitor
Type	Polypropylene film capacitor
Safety approvals:	CQC/VDE/TUV/CL
Approval standard	GB/T3667,EN65712
Climatic category	25/70/21,25/85/21,40/70/21,40/85/21
Rated voltage	150VAC~600VAC(50-60Hz)
Capacitance range	3uf~100uf
Capacitance tolerance	+_5%(J),+_10%(K),+10%(U),-5%(U)
Testing voltage
Between terminals	2*Un(VAC)/5s
Between terminals and case	2*Un+1000(VAC)/5s(>=2000VAC)
Insulation Resistance(20)
Between terminals	>=2000MΩ,UF(500VDC,5s)
Tangent of loss angle(20)	<=0.002(100Hz)
Class of safety protection	S0/S3
Fault Currency	10,000AFC(UL810)
Place of CHINAMFG	CHINA
Packing	More pieces in 1 inner box or polybag as customer request.
Color	accept customization
Supplier type	OEM factory

Capacitance(uf)	250/300VAC					400-450VAC
	Cylindrical			Ocal	Cylindrical		Ocal
	D	H	LWH	H	D	LWH
10uf	40	55	51.531.565	30	60	51.531.565
15uf	40	55	51.531.565	35	60	/
20uf	40	65	51.531.565	40	60	51.531.575
25uf	40	65	51.531.565	40	60	51.531.585
30uf	/	/	/	40	70	71.54575
35uf	40	75	71.54575	45	70	/
40uf	/	/	/	45	70	71.54585
45uf	45	75	71.54575	45	80	/
50uf	45	85	71.54585	45	90	71.545100
60uf	45	95	71.545100	50	90	/

Dual capacitors come in a variety of sizes, depending on the capacitance (µF or MFD) and the voltage.

“TIME” to Replace
The Dual Run AC Capacitor needs to be replaced when the following conditions occur:

“SUPER EASY” to Install

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application:	Home
Certification:	ISO9001, CE, CCC, RoHS
Type:	Polypropylene Film Capacitor

Samples:	US$ 0.01/Piece 1 Piece(Min.Order) \| Order Sample

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

induction motor

How do variable frequency drives (VFDs) impact the performance of AC motors?

Variable frequency drives (VFDs) have a significant impact on the performance of AC motors. A VFD, also known as a variable speed drive or adjustable frequency drive, is an electronic device that controls the speed and torque of an AC motor by varying the frequency and voltage of the power supplied to the motor. Let’s explore how VFDs impact AC motor performance:

Speed Control: One of the primary benefits of using VFDs is the ability to control the speed of AC motors. By adjusting the frequency and voltage supplied to the motor, VFDs enable precise speed control over a wide range. This speed control capability allows for more efficient operation of the motor, as it can be operated at the optimal speed for the specific application. It also enables variable speed operation, where the motor speed can be adjusted based on the load requirements, resulting in energy savings and enhanced process control.
Energy Efficiency: VFDs contribute to improved energy efficiency of AC motors. By controlling the motor speed based on the load demand, VFDs eliminate the energy wastage that occurs when motors run at full speed even when the load is light. The ability to match the motor speed to the required load reduces energy consumption and results in significant energy savings. In applications where the load varies widely, such as HVAC systems, pumps, and fans, VFDs can provide substantial energy efficiency improvements.
Soft Start and Stop: VFDs offer soft start and stop capabilities for AC motors. Instead of abruptly starting or stopping the motor, which can cause mechanical stress and electrical disturbances, VFDs gradually ramp up or down the motor speed. This soft start and stop feature reduces mechanical wear and tear, extends the motor’s lifespan, and minimizes voltage dips or spikes in the electrical system. It also eliminates the need for additional mechanical devices, such as motor starters or brakes, improving overall system reliability and performance.
Precision Control and Process Optimization: VFDs enable precise control over AC motor performance, allowing for optimized process control in various applications. The ability to adjust motor speed and torque with high accuracy enables fine-tuning of system parameters, such as flow rates, pressure, or temperature. This precision control enhances overall system performance, improves product quality, and can result in energy savings by eliminating inefficiencies or overcompensation.
Motor Protection and Diagnostic Capabilities: VFDs provide advanced motor protection features and diagnostic capabilities. They can monitor motor operating conditions, such as temperature, current, and voltage, and detect abnormalities or faults in real-time. VFDs can then respond by adjusting motor parameters, issuing alerts, or triggering shutdowns to protect the motor from damage. These protection and diagnostic features help prevent motor failures, reduce downtime, and enable predictive maintenance, resulting in improved motor reliability and performance.
Harmonics and Power Quality: VFDs can introduce harmonics into the electrical system due to the switching nature of their operation. Harmonics are undesirable voltage and current distortions that can impact power quality and cause issues in the electrical distribution network. However, modern VFDs often include built-in harmonic mitigation measures, such as line reactors or harmonic filters, to minimize harmonics and ensure compliance with power quality standards.

In summary, VFDs have a profound impact on the performance of AC motors. They enable speed control, enhance energy efficiency, provide soft start and stop capabilities, enable precision control and process optimization, offer motor protection and diagnostic features, and address power quality considerations. The use of VFDs in AC motor applications can lead to improved system performance, energy savings, increased reliability, and enhanced control over various industrial and commercial processes.

induction motor

What are the safety considerations when working with or around AC motors?

Working with or around AC motors requires careful attention to safety to prevent accidents, injuries, and electrical hazards. Here are some important safety considerations to keep in mind:

Electrical Hazards: AC motors operate on high voltage electrical systems, which pose a significant electrical hazard. It is essential to follow proper lockout/tagout procedures when working on motors to ensure that they are de-energized and cannot accidentally start up. Only qualified personnel should perform electrical work on motors, and they should use appropriate personal protective equipment (PPE), such as insulated gloves, safety glasses, and arc flash protection, to protect themselves from electrical shocks and arc flash incidents.
Mechanical Hazards: AC motors often drive mechanical equipment, such as pumps, fans, or conveyors, which can present mechanical hazards. When working on or near motors, it is crucial to be aware of rotating parts, belts, pulleys, or couplings that can cause entanglement or crushing injuries. Guards and safety barriers should be in place to prevent accidental contact with moving parts, and proper machine guarding principles should be followed. Lockout/tagout procedures should also be applied to the associated mechanical equipment to ensure it is safely de-energized during maintenance or repair.
Fire and Thermal Hazards: AC motors can generate heat during operation, and in some cases, excessive heat can pose a fire hazard. It is important to ensure that motors are adequately ventilated to dissipate heat and prevent overheating. Motor enclosures and cooling systems should be inspected regularly to ensure proper functioning. Additionally, combustible materials should be kept away from motors to reduce the risk of fire. If a motor shows signs of overheating or emits a burning smell, it should be immediately shut down and inspected by a qualified professional.
Proper Installation and Grounding: AC motors should be installed and grounded correctly to ensure electrical safety. Motors should be installed according to manufacturer guidelines, including proper alignment, mounting, and connection of electrical cables. Adequate grounding is essential to prevent electrical shocks and ensure the safe dissipation of fault currents. Grounding conductors, such as grounding rods or grounding straps, should be properly installed and regularly inspected to maintain their integrity.
Safe Handling and Lifting: AC motors can be heavy and require proper handling and lifting techniques to prevent musculoskeletal injuries. When moving or lifting motors, equipment such as cranes, hoists, or forklifts should be used, and personnel should be trained in safe lifting practices. It is important to avoid overexertion and use proper lifting tools, such as slings or lifting straps, to distribute the weight evenly and prevent strain or injury.
Training and Awareness: Proper training and awareness are critical for working safely with or around AC motors. Workers should receive training on electrical safety, lockout/tagout procedures, personal protective equipment usage, and safe work practices. They should be familiar with the specific hazards associated with AC motors and understand the appropriate safety precautions to take. Regular safety meetings and reminders can help reinforce safe practices and keep safety at the forefront of everyone’s minds.

induction motor

Can you explain the basic working principle of an AC motor?

An AC motor operates based on the principles of electromagnetic induction. It converts electrical energy into mechanical energy through the interaction of magnetic fields. The basic working principle of an AC motor involves the following steps:

The AC motor consists of two main components: the stator and the rotor. The stator is the stationary part of the motor and contains the stator windings. The rotor is the rotating part of the motor and is connected to a shaft.
When an alternating current (AC) is supplied to the stator windings, it creates a changing magnetic field.
The changing magnetic field induces a voltage in the rotor windings, which are either short-circuited conductive bars or coils.
The induced voltage in the rotor windings creates a magnetic field in the rotor.
The magnetic field of the rotor interacts with the rotating magnetic field of the stator, resulting in a torque force.
The torque force causes the rotor to rotate, transferring mechanical energy to the connected shaft.
The rotation of the rotor continues as long as the AC power supply is provided to the stator windings.

This basic working principle is applicable to various types of AC motors, including induction motors and synchronous motors. However, the specific construction and design of the motor may vary depending on the type and intended application.

China Hot selling Cbcbb65 450V AC Motor Run Capacitor 30UF 35UF 40UF 45UF 50UF 55UF 60UF 65UF for Air Conditioner vacuum pump diy
editor by CX 2024-04-15

China Best Sales Wholesale Air Conditioner Parts AC Motor Capacitor Cbb60 Capacitor for Motor Run Applications supplier

Product Description

CBB60

For motor run applications

1.AC Motor Capacitor Flame retardant plastic (bakelite on request) case

2.Operating temperature: -40 °C to + 70°C

3.Rated frequency: 50/60Hz

4.Pin or wire outlet

Capacitance	Dimension-Diameter × Height (mm)
μF	370VAC – 400VAC	440VAC – 450VAC
3	25 × 60	25 × 60
6	25 × 60	30 × 60
8	30 × 60	34 × 52
10	30 × 60	34 × 52
12	30 × 60	34 × 62
16	34 × 52	35 × 71
18	34 × 52	35 × 71
20	34 × 52	40 × 71
25	34 × 62	40 × 71
30	40 × 71	45 × 71
35	40 × 71	45 × 71
40	40 × 71	45 × 92
50	42 × 70	50 × 92
60	45 × 71	50 × 102
65	45 × 71	50 × 102
70	50 × 85	55 × 120
75	50 × 85	55 × 120
80	50 × 92	55 × 120
100	50 × 102
120	50 × 102

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application:	Home
Certification:	ISO9001, CE
Type:	Capacitor

Samples:	US$ 3/Piece 1 Piece(Min.Order) \| Order Sample

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

induction motor

How do variable frequency drives (VFDs) impact the performance of AC motors?

Speed Control: One of the primary benefits of using VFDs is the ability to control the speed of AC motors. By adjusting the frequency and voltage supplied to the motor, VFDs enable precise speed control over a wide range. This speed control capability allows for more efficient operation of the motor, as it can be operated at the optimal speed for the specific application. It also enables variable speed operation, where the motor speed can be adjusted based on the load requirements, resulting in energy savings and enhanced process control.
Energy Efficiency: VFDs contribute to improved energy efficiency of AC motors. By controlling the motor speed based on the load demand, VFDs eliminate the energy wastage that occurs when motors run at full speed even when the load is light. The ability to match the motor speed to the required load reduces energy consumption and results in significant energy savings. In applications where the load varies widely, such as HVAC systems, pumps, and fans, VFDs can provide substantial energy efficiency improvements.
Soft Start and Stop: VFDs offer soft start and stop capabilities for AC motors. Instead of abruptly starting or stopping the motor, which can cause mechanical stress and electrical disturbances, VFDs gradually ramp up or down the motor speed. This soft start and stop feature reduces mechanical wear and tear, extends the motor’s lifespan, and minimizes voltage dips or spikes in the electrical system. It also eliminates the need for additional mechanical devices, such as motor starters or brakes, improving overall system reliability and performance.
Precision Control and Process Optimization: VFDs enable precise control over AC motor performance, allowing for optimized process control in various applications. The ability to adjust motor speed and torque with high accuracy enables fine-tuning of system parameters, such as flow rates, pressure, or temperature. This precision control enhances overall system performance, improves product quality, and can result in energy savings by eliminating inefficiencies or overcompensation.
Motor Protection and Diagnostic Capabilities: VFDs provide advanced motor protection features and diagnostic capabilities. They can monitor motor operating conditions, such as temperature, current, and voltage, and detect abnormalities or faults in real-time. VFDs can then respond by adjusting motor parameters, issuing alerts, or triggering shutdowns to protect the motor from damage. These protection and diagnostic features help prevent motor failures, reduce downtime, and enable predictive maintenance, resulting in improved motor reliability and performance.
Harmonics and Power Quality: VFDs can introduce harmonics into the electrical system due to the switching nature of their operation. Harmonics are undesirable voltage and current distortions that can impact power quality and cause issues in the electrical distribution network. However, modern VFDs often include built-in harmonic mitigation measures, such as line reactors or harmonic filters, to minimize harmonics and ensure compliance with power quality standards.

induction motor

What are the safety considerations when working with or around AC motors?

Working with or around AC motors requires careful attention to safety to prevent accidents, injuries, and electrical hazards. Here are some important safety considerations to keep in mind:

Electrical Hazards: AC motors operate on high voltage electrical systems, which pose a significant electrical hazard. It is essential to follow proper lockout/tagout procedures when working on motors to ensure that they are de-energized and cannot accidentally start up. Only qualified personnel should perform electrical work on motors, and they should use appropriate personal protective equipment (PPE), such as insulated gloves, safety glasses, and arc flash protection, to protect themselves from electrical shocks and arc flash incidents.
Mechanical Hazards: AC motors often drive mechanical equipment, such as pumps, fans, or conveyors, which can present mechanical hazards. When working on or near motors, it is crucial to be aware of rotating parts, belts, pulleys, or couplings that can cause entanglement or crushing injuries. Guards and safety barriers should be in place to prevent accidental contact with moving parts, and proper machine guarding principles should be followed. Lockout/tagout procedures should also be applied to the associated mechanical equipment to ensure it is safely de-energized during maintenance or repair.
Fire and Thermal Hazards: AC motors can generate heat during operation, and in some cases, excessive heat can pose a fire hazard. It is important to ensure that motors are adequately ventilated to dissipate heat and prevent overheating. Motor enclosures and cooling systems should be inspected regularly to ensure proper functioning. Additionally, combustible materials should be kept away from motors to reduce the risk of fire. If a motor shows signs of overheating or emits a burning smell, it should be immediately shut down and inspected by a qualified professional.
Proper Installation and Grounding: AC motors should be installed and grounded correctly to ensure electrical safety. Motors should be installed according to manufacturer guidelines, including proper alignment, mounting, and connection of electrical cables. Adequate grounding is essential to prevent electrical shocks and ensure the safe dissipation of fault currents. Grounding conductors, such as grounding rods or grounding straps, should be properly installed and regularly inspected to maintain their integrity.
Safe Handling and Lifting: AC motors can be heavy and require proper handling and lifting techniques to prevent musculoskeletal injuries. When moving or lifting motors, equipment such as cranes, hoists, or forklifts should be used, and personnel should be trained in safe lifting practices. It is important to avoid overexertion and use proper lifting tools, such as slings or lifting straps, to distribute the weight evenly and prevent strain or injury.
Training and Awareness: Proper training and awareness are critical for working safely with or around AC motors. Workers should receive training on electrical safety, lockout/tagout procedures, personal protective equipment usage, and safe work practices. They should be familiar with the specific hazards associated with AC motors and understand the appropriate safety precautions to take. Regular safety meetings and reminders can help reinforce safe practices and keep safety at the forefront of everyone’s minds.

induction motor

What is an AC motor, and how does it differ from a DC motor?

AC Motor:

DC Motor:

Differences:

The main differences between AC motors and DC motors are as follows:

Power Source: AC motors operate on alternating current, which is the standard power supply in most residential and commercial buildings. DC motors, on the other hand, require direct current and typically require a power supply that converts AC to DC.
Construction: AC motors and DC motors have similar construction with stators and rotors, but the design and arrangement of the windings differ. AC motors generally have three-phase windings, while DC motors can have either armature windings or permanent magnets.
Speed Control: AC motors typically operate at fixed speeds determined by the frequency of the power supply and the number of poles. DC motors, on the other hand, offer more flexibility in speed control and can be easily adjusted over a wide range of speeds.
Efficiency: AC motors are generally more efficient than DC motors. AC motors can achieve higher power densities and are often more suitable for high-power applications. DC motors, however, offer better speed control and are commonly used in applications that require precise speed regulation.
Applications: AC motors are widely used in applications such as industrial machinery, HVAC systems, pumps, and compressors. DC motors find applications in robotics, electric vehicles, computer disk drives, and small appliances.

China Best Sales Wholesale Air Conditioner Parts AC Motor Capacitor Cbb60 Capacitor for Motor Run Applications supplier
editor by CX 2024-04-12

China Custom 24V-220V AC Reversible Dual Shaft Electric Motor with High Torque Low Rpm for Air Conditioner vacuum pump belt

Product Description

Note:

The specifications can be designed according to the customer’s requirements!

Option:

The Shaft length, voltage, noise, life…

Application:

Laminator, Paper Shredder, Fan, Electric Oven, Grill, Air Conditioner, Heater Machines…

Parameter:

Model	Output speed (rpm)	Output Torque (kg.cm / lb.in)			Voltage (V.AC)	Current (A)	Frequency (Hz)	Input Power (W)	Noise (dB)	Rotation
Model	Output speed (rpm)	S1 continuous	S2 15 minutes	S2 5 minutes	Voltage (V.AC)	Current (A)	Frequency (Hz)	Input Power (W)	Noise (dB)	Rotation
S643-30-15	15	30 / 26.1	40 / 34.8	60 / 52.2	24 ******* 110 ******* 220	<0.9 ******** <0.2 ******* <0.1	50/60Hz	<20	<45	CW / CCW / Bi-directional
S643-22-20	20	22 / 19.1	30 / 26.1	45 / 39.2
S643-18-25	25	18 / 15.7	24 / 20.9	36 / 31.
S643-15-30	30	15 / 13	20 / 17.4	30 / 26.1
S643-12-40	40	11.5 / 10	15 / 13	22.5 / 19.8
S643-09-50	50	9 / 7.8	12 / 10.4	18 / 15.7
S643-08-60	60	7.5 / 6.5	10 / 8.7	15 / 13
S643-07-70	70	6.4 / 5.6	8.6 / 7.5	12.8 / 11.1
S643-06-80	80	5.6 / 4.9	7.5 / 6.5	11 / 9.6
S643-05-99	99	4.5 / 3.9	6 / 5.2	9 / 7.8
S643-03-152	152	3 / 2.6	4 / 3.5	6 / 5.2
Note: The above data are from motors under 50Hz. If under 60Hz, Speed*1.2, Torque/1.2 Other speed and torque needed, please contact our sale department

About Us:

I.CH motion co., LTD, headquartered in HangZhou, is a professional manufacturer and supplier of the motor. We have provided AC Motor, AC gear motor, DC gear motor, BLDC motor, BLDC Gear motor, BLDC Servo motor since 2006.

As a professional manufacturer who has professional teams, we can custom according to your needs.

Certificate:
IOS9001, CE

Service:
1, OEM & ODM service.
2, Quick reply: all email will be replied in 12 hours.
3, Shipment: take photos, send them to customers for confirmation.

Shipping:
1, Carton, Pallet, or what you want.
2, The Delivery time is about 30-45 days.

Customer’s Visiting:

FAQ:
1, Are you a factory?
Yes, we have been in designing and providing excellent motors for customers.
2, Can you provide a sample?
Yes.
3, How long you could prepare samples?
If customized one, about a week around.
4, If My package has missing products. What can I do?
Please contact our support team and we will confirm your order with the package contents. We apologize for any inconvenience. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application:	Industrial
Speed:	Low Speed
Function:	Driving, Control
Casing Protection:	Closed Type
Certification:	ISO9001, CCC
Brand:	I.CH

Customization:	Available \|

induction motor

Can you explain the concept of motor efficiency and how it relates to AC motors?

Motor efficiency is a measure of how effectively an electric motor converts electrical power into mechanical power. It represents the ratio of the motor’s useful output power (mechanical power) to the input power (electrical power) it consumes. Higher efficiency indicates that the motor converts a larger percentage of the electrical energy into useful mechanical work, while minimizing energy losses in the form of heat and other inefficiencies.

In the case of AC motors, efficiency is particularly important due to their wide usage in various applications, ranging from residential appliances to industrial machinery. AC motors can be both induction motors, which are the most common type, and synchronous motors, which operate at a constant speed synchronized with the frequency of the power supply.

The efficiency of an AC motor is influenced by several factors:

Motor Design: The design of the motor, including its core materials, winding configuration, and rotor construction, affects its efficiency. Motors that are designed with low-resistance windings, high-quality magnetic materials, and optimized rotor designs tend to have higher efficiency.
Motor Size: The physical size of the motor can also impact its efficiency. Larger motors generally have higher efficiency because they can dissipate heat more effectively, reducing losses. However, it’s important to select a motor size that matches the application requirements to avoid operating the motor at low efficiency due to underloading.
Operating Conditions: The operating conditions, such as load demand, speed, and temperature, can influence motor efficiency. Motors are typically designed for maximum efficiency at or near their rated load. Operating the motor beyond its rated load or at very light loads can reduce efficiency. Additionally, high ambient temperatures can cause increased losses and reduced efficiency.
Magnetic Losses: AC motors experience losses due to magnetic effects, such as hysteresis and eddy current losses in the core materials. These losses result in heat generation and reduce overall efficiency. Motor designs that minimize magnetic losses through the use of high-quality magnetic materials and optimized core designs can improve efficiency.
Mechanical Friction and Windage Losses: Friction and windage losses in the motor’s bearings, shaft, and rotating parts also contribute to energy losses and reduced efficiency. Proper lubrication, bearing selection, and reducing unnecessary mechanical resistance can help minimize these losses.

Efficiency is an important consideration when selecting an AC motor, as it directly impacts energy consumption and operating costs. Motors with higher efficiency consume less electrical power, resulting in reduced energy bills and a smaller environmental footprint. Additionally, higher efficiency often translates to less heat generation, which can enhance the motor’s reliability and lifespan.

Regulatory bodies and standards organizations, such as the International Electrotechnical Commission (IEC) and the National Electrical Manufacturers Association (NEMA), provide efficiency classes and standards for AC motors, such as IE efficiency classes and NEMA premium efficiency standards. These standards help consumers compare the efficiency levels of different motors and make informed choices to optimize energy efficiency.

In summary, motor efficiency is a measure of how effectively an AC motor converts electrical power into mechanical power. By selecting motors with higher efficiency, users can reduce energy consumption, operating costs, and environmental impact while ensuring reliable and sustainable motor performance.

induction motor

Can AC motors be used in renewable energy systems, such as wind turbines?

Yes, AC motors can be used in renewable energy systems, including wind turbines. In fact, AC motors are commonly employed in various applications within wind turbines due to their numerous advantages. Here’s a detailed explanation:

1. Generator: In a wind turbine system, the AC motor often functions as a generator. As the wind turbine blades rotate, they drive the rotor of the generator, which converts the mechanical energy of the wind into electrical energy. AC generators are commonly used in wind turbines due to their efficiency, reliability, and compatibility with power grid systems.

2. Variable Speed Control: AC motors offer the advantage of variable speed control, which is crucial for wind turbines. The wind speed is variable, and in order to maximize energy capture, the rotor speed needs to be adjusted accordingly. AC motors, when used as generators, can adjust their rotational speed with the changing wind conditions by modifying the frequency and voltage of the output electrical signal.

3. Efficiency: AC motors are known for their high efficiency, which is an important factor in renewable energy systems. Wind turbines aim to convert as much of the wind energy into electrical energy as possible. AC motors, especially those designed for high efficiency, can help maximize the overall energy conversion efficiency of the wind turbine system.

4. Grid Integration: AC motors are well-suited for grid integration in renewable energy systems. The electrical output from the AC generator can be easily synchronized with the grid frequency and voltage, allowing for seamless integration of the wind turbine system with the existing power grid infrastructure. This facilitates the efficient distribution of the generated electricity to consumers.

5. Control and Monitoring: AC motors offer advanced control and monitoring capabilities, which are essential for wind turbine systems. The electrical parameters, such as voltage, frequency, and power output, can be easily monitored and controlled in AC motor-based generators. This allows for real-time monitoring of the wind turbine performance, fault detection, and optimization of the power generation process.

6. Availability and Standardization: AC motors are widely available in various sizes and power ratings, making them readily accessible for wind turbine applications. They are also well-standardized, ensuring compatibility with other system components and facilitating maintenance, repair, and replacement activities.

It’s worth noting that while AC motors are commonly used in wind turbines, there are other types of generators and motor technologies utilized in specific wind turbine designs, such as permanent magnet synchronous generators (PMSGs) or doubly-fed induction generators (DFIGs). These alternatives offer their own advantages and may be preferred in certain wind turbine configurations.

In summary, AC motors can indeed be used in renewable energy systems, including wind turbines. Their efficiency, variable speed control, grid integration capabilities, and advanced control features make them a suitable choice for converting wind energy into electrical energy in a reliable and efficient manner.

induction motor

How does the speed control mechanism work in AC motors?

The speed control mechanism in AC motors varies depending on the type of motor. Here, we will discuss the speed control methods used in two common types of AC motors: induction motors and synchronous motors.

Speed Control in Induction Motors:

Induction motors are typically designed to operate at a constant speed determined by the frequency of the AC power supply and the number of motor poles. However, there are several methods for controlling the speed of induction motors:

Varying the Frequency: By varying the frequency of the AC power supply, the speed of an induction motor can be adjusted. This method is known as variable frequency drive (VFD) control. VFDs convert the incoming AC power supply into a variable frequency and voltage output, allowing precise control of motor speed. This method is commonly used in industrial applications where speed control is crucial, such as conveyors, pumps, and fans.
Changing the Number of Stator Poles: The speed of an induction motor is inversely proportional to the number of stator poles. By changing the connections of the stator windings or using a motor with a different pole configuration, the speed can be adjusted. However, this method is less commonly used and is typically employed in specialized applications.
Adding External Resistance: In some cases, external resistance can be added to the rotor circuit of an induction motor to control its speed. This method, known as rotor resistance control, involves inserting resistors in series with the rotor windings. By varying the resistance, the rotor current and torque can be adjusted, resulting in speed control. However, this method is less efficient and is mainly used in specific applications where precise control is not required.

Speed Control in Synchronous Motors:

Synchronous motors offer more precise speed control compared to induction motors due to their inherent synchronous operation. The following methods are commonly used for speed control in synchronous motors:

Adjusting the AC Power Frequency: Similar to induction motors, changing the frequency of the AC power supply can control the speed of synchronous motors. By adjusting the power frequency, the synchronous speed of the motor can be altered. This method is often used in applications where precise speed control is required, such as industrial machinery and processes.
Using a Variable Frequency Drive: Variable frequency drives (VFDs) can also be used to control the speed of synchronous motors. By converting the incoming AC power supply into a variable frequency and voltage output, VFDs can adjust the motor speed with high accuracy and efficiency.
DC Field Control: In some synchronous motors, the rotor field is supplied by a direct current (DC) source, allowing for precise control over the motor’s speed. By adjusting the DC field current, the magnetic field strength and speed of the motor can be controlled. This method is commonly used in applications that require fine-tuned speed control, such as industrial processes and high-performance machinery.

These methods provide different ways to control the speed of AC motors, allowing for flexibility and adaptability in various applications. The choice of speed control mechanism depends on factors such as the motor type, desired speed range, accuracy requirements, efficiency considerations, and cost constraints.

China Custom 24V-220V AC Reversible Dual Shaft Electric Motor with High Torque Low Rpm for Air Conditioner vacuum pump belt
editor by CX 2024-04-10

China Standard AC Electric Indoor Air Conditioner Motor with Capacitor for Air Curtain Machine vacuum pump oil near me

Product Description

Factory Price AC Electric Fan Motor with Capacitor for Air Curtain Machine

Product characteristic
Type: Fan motor for indoor air conditioner
This motor has a contorl system with Hall Effect Aplication, according input volt singal, it can control motor speed. But must be supported by a PCB in your machine.
IF we doesn’t have this system, we can only connect with the wires according the diagram on right. The motor also can work.
The installation of motor is firm and reliable, the fastener is tight, and the running is stable, without block and abnormal noise.
The matched high-efficiency vane with various sizes and lenghths are provided.

Mechanical dimensions

Electrical specification

Brand Name:	OEM	Model Number:	ZG-YYSS-01	Type:	Asynchronous Motor
Frequency:	50/60HZ	Output Power:	12w	Protect Feature:	Waterproof
Phase:	Single-phase	AC Voltage:	220V-240V	Place of Origin:	China (Mainland)
Efficiency:	IE 2	rust prevention:	thermal protector	color:	cream
voltage:	220-240V	phase:	single-phase	rated current:	0.7A
speed:	1500rpm	insulation grade:	B	type:	AC motor
output power:	100W	input power:	155W

Packaging & Delivery
Specifications
Air conditioner motor
1.Voltage/Current:220-240/0.13A-0.28A
2.Frequency:50/60Hz
3.Output power: 6W ~25W
Speed:800R/M~1300R/M

ABOUT US

Ritscher group was set up in 2006.we always focus on micro-motors for household electrical appliance and industry appliance since setting up.currently we have 2 professional micro-motor factories in China which severally located in HangZhou city and HangZhou city.it has an area of 25,000 square CHINAMFG plants and more than 300 employees, annual output is 3 million pcs and has 5 million pcs annual producing capacity.after several years development,we had built a great reputation in the market and got more and more customers’ trust in the world. We started from shaded pole motors at beginning, up to now,our product included of shaded pole motors,synchronous motors,stepping motors ,capacitor motors, BLDC motors, DC motors and compressors. Our product are widely used for making refrigerators, freezers, micro-wave ovens, air warmers, air exhausters, ventilators,ovens, air filter, massage machines and many other equipments. As a realiable quality guaranty,Ritscher has complete R&D departement,QC department,producing department,purchase department etc. has perfect producing equipment like Aluminum diecasting, Zinc diecasting, Sheet metal stamping, Plastic injection molding etc. also test/ detection device like multiplex temp measuring device, performance parameter inspection device, Phenol peptide solution pinhole tester,Anechoic room etc. Endeavoring to provide the best product and service to customers,we always do the most effort to become an outstanding manufacturer of micro motors. CHINAMFG is always willing to establish sincere business relationship with friends from all over the world. Welcome contact with us!

Our company FAQ for you

(1) Q: What kind motors you can provide?
A:For now,we mainly provide Kitchen Hood Motor,DC Motor,Gear Motor,Fan Motor Refrigerator Motor,Hair Dryer Motor Blender Motor Mixer Motor,
Shade Pole Motor,Capacitor Motor,BLDC Motor PMDC Motor,Synchronous Motor,Stepping Motor etc.

(2) Q: Is it possible to visit your factory
A: Sure. But please kindly keep us posted a few days in advance. We need to check our
schedule to see if we are available then.

(3) Q: Can I get some samples
A: It depends. If only a few samples for personal use or replacement, I am afraid it will
be difficult for us to provide, because all of our motors are custom made and no stock
available if there is no further needs. If just sample testing before the official order and
our MOQ, price and other terms are acceptable, we’d love to provide samples.

(4) Q: Is there a MOQ for your motors?
A: Yes. The MOQ is between 1000~10,000pcs for different models after sample approval.
But it’s also okay for us to accept smaller lots like a few dozens, hundreds or thousands
For the initial 3 orders after sample approval.For samples, there is no MOQ requirement. But the less the better (like no more than 5pcs) on condition that the quantity is enough in case any changes needed after initial testing.

Application:	Industrial
Speed:	Variable Speed
Number of Stator:	Single-Phase
Function:	Driving, Control
Casing Protection:	Protection Type
Number of Poles:	2

Samples:	US$ 0/Piece 1 Piece(Min.Order) \|

Customization:	Available \|

induction motor

What role do AC motors play in HVAC (heating, ventilation, and air conditioning) systems?

Air Handling Units (AHUs) and Ventilation Systems: AC motors drive the fans in AHUs and ventilation systems. These fans draw in fresh air, circulate air within the building, and exhaust stale air. The motors provide the necessary power to move air through the ductwork and distribute it evenly throughout the space. They play a key role in maintaining proper indoor air quality, controlling humidity, and ensuring adequate ventilation.
Chillers and Cooling Towers: HVAC systems that use chillers for cooling rely on AC motors to drive the compressor. The motor powers the compressor, which circulates refrigerant through the system, absorbing heat from the indoor environment and releasing it outside. AC motors are also used in cooling towers, which dissipate heat from the chiller system by evaporating water. The motors drive the fans that draw air through the cooling tower and enhance heat transfer.
Heat Pumps: AC motors are integral components of heat pump systems, which provide both heating and cooling. The motor drives the compressor in the heat pump, enabling the transfer of heat between the indoor and outdoor environments. During cooling mode, the motor circulates refrigerant to extract heat from indoors and release it outside. In heating mode, the motor reverses the refrigerant flow to extract heat from the outdoor air or ground and transfer it indoors.
Furnaces and Boilers: In heating systems, AC motors power the blowers or fans in furnaces and boilers. The motor drives the blower to distribute heated air or steam throughout the building. This helps maintain a comfortable indoor temperature and ensures efficient heat distribution in the space.
Pumps and Circulation Systems: HVAC systems often incorporate pumps for water circulation, such as in hydronic heating or chilled water systems. AC motors drive these pumps, providing the necessary pressure to circulate water or other heat transfer fluids through the system. The motors ensure efficient flow rates and contribute to the effective transfer of thermal energy.
Dampers and Actuators: AC motors are used in HVAC systems to control airflow and regulate the position of dampers and actuators. These motors enable the adjustment of airflow rates, temperature control, and zone-specific climate control. By modulating the motor speed or position, HVAC systems can achieve precise control of air distribution and temperature in different areas of a building.

induction motor

How do AC motors contribute to the functioning of household appliances?

AC motors play a crucial role in the functioning of numerous household appliances by converting electrical energy into mechanical energy. These motors are used in a wide range of devices, powering various components and performing essential tasks. Let’s explore how AC motors contribute to the functioning of household appliances:

Kitchen Appliances: AC motors are found in various kitchen appliances, such as refrigerators, freezers, dishwashers, and blenders. In refrigerators and freezers, AC motors drive the compressor, which circulates the refrigerant and maintains the desired temperature. Dishwashers use AC motors to power the water pumps, spray arms, and the motorized detergent dispenser. Blenders utilize AC motors to rotate the blades and blend ingredients.
Laundry Appliances: AC motors are integral to laundry appliances like washing machines and clothes dryers. Washing machines rely on AC motors to power the agitator or the drum, facilitating the washing and spinning cycles. Clothes dryers use AC motors to rotate the drum and operate the blower fan, facilitating the drying process.
Vacuum Cleaners: Vacuum cleaners utilize AC motors to generate suction and drive the motorized brush or beater bar. These motors power the fan or impeller, creating the necessary airflow for effective cleaning.
Fans and Air Circulation: AC motors are employed in various types of fans, including ceiling fans, table fans, and pedestal fans. These motors drive the fan blades, producing airflow and facilitating air circulation to provide cooling or ventilation in rooms. Additionally, AC motors power exhaust fans used in kitchens, bathrooms, and range hoods to remove odors, smoke, or excess moisture.
Air Conditioning and Heating Systems: AC motors are critical components in air conditioning and heating systems. They power the compressor, condenser fan, and blower fan, which are responsible for circulating refrigerant, dissipating heat, and delivering conditioned air throughout the house. AC motors enable the regulation of temperature and humidity levels, ensuring comfort in residential spaces.
Garage Door Openers: AC motors are utilized in garage door openers to drive the mechanism responsible for opening and closing the garage door. These motors generate the necessary torque to lift or lower the door smoothly and efficiently.
Other Appliances: AC motors are also found in a variety of other household appliances. For instance, they power pumps in water heaters, swimming pool filters, and sump pumps. AC motors are used in dehumidifiers, humidifiers, and air purifiers to drive the fans and other internal components. They are also present in audiovisual equipment, such as DVD players, record players, and fans used for cooling electronics.

In summary, AC motors are essential components in household appliances, enabling their proper functioning and delivering the mechanical energy required for various tasks. From kitchen appliances to laundry machines, fans, air conditioning systems, and more, AC motors provide the necessary power and functionality to enhance our daily lives.

induction motor

Can you explain the basic working principle of an AC motor?

The AC motor consists of two main components: the stator and the rotor. The stator is the stationary part of the motor and contains the stator windings. The rotor is the rotating part of the motor and is connected to a shaft.
When an alternating current (AC) is supplied to the stator windings, it creates a changing magnetic field.
The changing magnetic field induces a voltage in the rotor windings, which are either short-circuited conductive bars or coils.
The induced voltage in the rotor windings creates a magnetic field in the rotor.
The magnetic field of the rotor interacts with the rotating magnetic field of the stator, resulting in a torque force.
The torque force causes the rotor to rotate, transferring mechanical energy to the connected shaft.
The rotation of the rotor continues as long as the AC power supply is provided to the stator windings.

China Standard AC Electric Indoor Air Conditioner Motor with Capacitor for Air Curtain Machine vacuum pump oil near me
editor by CX 2023-11-29

in Raipur India sales price shop near me near me shop factory supplier Split 230V 50Hz Air Conditioner Window AC Price Condenser Fan Coil Unit Motor manufacturer best Cost Custom Cheap wholesaler

Good quality and credit rating are the bases that make a corporation alive. Our solution assortment also addresses locking assemblies (clamping aspects/locking system), taper bushes, QD bushes, bolt-on hubs, torque limiters, shaft collars, motor bases and motor slides, chain detachers, chain guides, universal joint, rod finishes and yokes. Our merchandise are produced by contemporary computerized machinery and tools.

SpEPT 230v 50hz Air Conditioner Window AC Cost Condenser Supporter Coil Device Motor

Solution Characteristic

1.Compact composition, little size, ligEPT weight, lovely physical appearance.
two.Steady rise minimal, high efficiency, environmental defense, strength conserving, sleek operating, minimal noise
three. Special bearings for minimal noise, easy managing, modest vibration, and aluminum alloy end caps for corrosion resistant.
four. EPTuilt-in temperature manage swap to successfully defend the motor, higher dependability for EPT support existence.
five. Multi-velocity regulator, a assortment of set up methods to meet distinct requirements.

Merchandise DESCRIPTION

Design	Voltage (V)	Frequency (Hz)	Output (W)	Speed (RPM)	Capacitor ( muF)
YSK95-40-four	208-230	fifty/60	40W	950/750/600	3.
YSK95-60-four	208-230	fifty/sixty	60W	1100/950/750	three.5
YSK110-sixteen-four	208-230	fifty/60	16W	750/600/480	1.
YSK110-20-4	208-230	fifty/60	20W	830/660/520	two.
YSK110-25-four	208-230	fifty/sixty	25W	850/680/540	two.five
YSK110-30-4	208-230	50/60	30W	880/seven-hundred/560	2.five
YSK110-35-4	208-230	50/60	35W	900/720/580	three.
YSK110-forty-4	208-230	50/sixty	40W	950/750/600	3.
YSK110-forty five-4	208-230	fifty/60	45W	one thousand/800/650	3.
YSK110-50-4	208-230	fifty/sixty	50W	1050/840/670	3.five
YSK110-sixty-four	208-230	50/sixty	60W	1100/950/750	3.5
YSK110-eighty-4	208-230	fifty/sixty	80W	1200/900/seven hundred	four.
YSK120-seventy four-four	208-230	fifty/60	74W	1150/900/seven-hundred	4.
YSK139-250-4	208-230	50/60	250W	1200/950/750	10.
YSK139-350-4	208-230	50/sixty	350W	1300/one thousand/850	twelve.
YSK139-750-6	208-230	fifty/sixty	750W	900/720/580	16.

Merchandise Display

Trade Terms:
one. Trade Terms: FOEPT, CEPT, CNF, EXW, Door TO Door.
two. Payment Conditions: T/T, L/C, Western Union.
3. Payment Condition: thirty% deposit EPT, 70% stability before delivery.
4. Delivery Time: 15-thirty daEPTafter deposit (if T/T).
5. Transport: EPTy sea, by air and by convey delivery

Our aggressive Benefits:
1) Price and excellent service
We have twelve years expertise in the production and administration of AC enthusiast motors and enthusiasts, have our possess EPT, administration expenses and procurement fees of rigorous handle, and peer relatively robust price tag advantage. So we can supply substantial high quality merchandise and services.

2) Specialized advantage
Our Main individual who is in charge of EPT, has twenty years of motor, supporter motor manufacturing encounter, with numerous CNC lathe, computerized punching EPT, computerized winding EPT, automatic oiling EPT, wind blade balXiHu (West Lake) Dis.Hu (West Lake) Dis.ng instrument tools motor principal generation processes are for the manufacturing unit manufacturing.

three) Product gain
Substantial performance, power conserving, higher commencing torque, lower noise, tiny vibration, reliable operation and easy upkeep etc. We have value edge, technological gain and sizeable knowledge. So you can consider the same expense purchase a lot more much better products, or spend significantly less for the exact same product.

four). Our motor is mainly used in HVAC market, such as air conditioner, air cooler, supporter coil unit, purifier, h2o heater, induction fan, duct supporter, dehumidifier, evaporator, condenser, and so on. Motor output EPT from 5W-750W.

five).Our ac admirer motors have two types, solitary phase asynchronous admirer motor and three phases asynchronous supporter motor. It is convenient in installation with substantial effectiveness.

FAQ:
Q1- How to get the precise offer you?
The exact price tag will be quoted right after checking the specification and mounting dimension of the motor.

Q2- What is the guarantee of the motors?
The warranty is twelve months on the generation date, unEPTthe warranty we will find the money for the transport cost to deliver the substitute.

Q3- What is the software of the motors?
All our motors are commonly utilised in HVAC method.

Q4- Can you design and style the motor in accordance to the different ask for?
Yes, we can offer the ODM/OEM.

Q5: Are you a maker?
A: Indeed, We have been in creating and delivering great products for customers. Our manufacturing facility creation is all comply to ISO 9001 EPT Management Method.

Q6: How EPT you could prepare samples?
A: Usually three daEPTif we have the sample in hand. If customized one, about a 7 days close to.

in Raipur India sales price shop near me near me shop factory supplier Split 230V 50Hz Air Conditioner Window AC Price Condenser Fan Coil Unit Motor manufacturer best Cost Custom Cheap wholesaler

in Adelaide Australia sales price shop near me near me shop factory supplier 58 Series Power Saving Shaded Pole AC Fan Motor for Air Conditioner manufacturer best Cost Custom Cheap wholesaler

Possessing accrued treasured encounter in cooperating with overseas customers, Our items are manufactured by modern day computerized equipment and products. We will offer best providers and substantial top quality goods with all sincerity. 58series shaded Pole Motor

Motor Description:

one.Our motors efficiency(info) are for each customers` requirments.

two.Motor wires are cooper and some could be employed aluminium wire to help save cost

three.Motors could be utilised ball bearing and oil bear(Sleeve bearing) both.

four.Insulation Course EPT/F
face up to voltage:1800V/S/.5mA
Rotation:CW (check out from the shaft facet)
Sounds lt50dEPT
Interturn Isulation: gt2100V
Isulation Resistance:20M Omega
IP:34
Daily life span: gt2000Hours (ongoing doing work).Typical use:ten a long time
Procedure Temperature/Humidity Selection:-forty degC to 65 degC, %~ninety five%

5.Protected,trustworthy, lower sounds, high overall performance,characteristics tough, good and secure beginning, EPT existence, and so forth.

six.Standard Software: Exhaust fan, air purifier, micro-oven, supporter, induction cooker, refrigerator, pump, heater, hood oven, blwer, air conditioner, Heater EPTs, dehumidifiers

7.Motor Specification as under chart

Product	A OF Size	SHAFT DIA	VOLT	EPT	TORQUE	Pace RATED
YJ5812	12MM	4MM	110-240V	10W	6.71mN.m	3000RPM
YJ5816	13MM	4MM	a hundred and ten-240V	13W	6.85mN.m	3000RPM
YJ5820	20MM	5MM	110-240V	15W	eight.89mN.m	3400RPM
YJ5830	30MM	4MM	a hundred and ten-240V	50W	12.9mN.m	3400RPM

Fine Watt motor concentrate on providing motor answers to smart goods for house equipment ,like EPTLDC,Capacitor motor,shaded pole motor,EPT motor and mini generator. Our motors are extensively utilized in kitchen area,air conditional,Ice upper body,washing EPT,and many others. Customers identify not only in EPT domestic ,also oversea from Asia to European and Amecica. Our engineer with twenty many years encounter in motor design and style and deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ment,win a great deal of motor inovation EPT award,Our engineer also provide technical assist to other big facotry.we imagine we alwaEPTcan uncover the best resolution for your solution.

Business FAQ

(one) Q: What sort motors you can offer?
A:For now,we mostly supply Kitchen Hood Motor,DC Motor,Gear Motor,Enthusiast Motor Refrigerator Motor,Hair Dryer Motor EPTlenEPTMotor Mixer Motor,
EPTLDC Motor,Shade Pole Motor,Capacitor Motor, PMDC Motor,Synchronous Motor,etc

(two) Q: Is it attainable to check out your manufacturing unit
A: Positive. We alwaEPTlike to fulfill our customer encounter to encounter,this is greater for understXiHu (West Lake) Dis.Hu (West Lake) Dis..EPTut make sure you kindly hold us posted a few daEPTEPT so we can make excellent arrangement.

(three) Q: Can I get some samples
A: It depends. If only a handful of samples for personalized use or substitute, I am frightened it will be hard for us to supply, due to the fact all of our motors are EPT and no stock accessible if there is no more requirements. If just sample tests before the official orEPTand our MOQ, value and other conditions are acceptable, we will supply samples.

(4) Q: Is there a MOQ for your motors?
A: Indeed. The MOQ is in between one thousand~10,000pcs for various types soon after sample approval.
EPTut it truly is also okay for us to take smaller sized plenty like a couple of dozens, hundreds or thousands
For the preliminary 3 orders soon after sample approval.For samples, there is no MOQ need. EPTut the significantly less the much better (like no more than 5pcs) on issue that the quantity is ample in situation any adjustments necessary soon after first screening.

(5)Q: What gain do you have?

A: For motors, we have good quality guarantee, if there is probelm motor right after inspection in buyer property,we will exchange .
For services, we offer 24 hrs complex help and barrier-cost-free communication with excellent support folks.
Complex provider: Besides provide true motor merchandise,we can also supply motor specialized supporting seperately to our customer.Our engineers are depict the most innovative techonogy.

in Adelaide Australia sales price shop near me near me shop factory supplier 58 Series Power Saving Shaded Pole AC Fan Motor for Air Conditioner manufacturer best Cost Custom Cheap wholesaler

in Hannover Germany sales price shop near me near me shop factory supplier Rpg20 Air Conditioner Indoor Unit Motor Resin Packed AC Fan Motor manufacturer best Cost Custom Cheap wholesaler

EPG was awarded with “popular merchandise of Zhejiang Province” and “popular manufacturer of Zhejiang Province”. We have exported our products to Korea, Turkey, Bulgaria, Romania, Russia, Italy, Norway, the United states, Canada, etc. It has proven secure cooperation with several properly identified universities and institutes in china this sort of as, Zhejiang University, Jilin College, Complex committee of countrywide chain generate common, Institute of national chain travel, Zhejiang software engineering material institute, Huhan materials security institute and it cooperated to found China Initial Auto chain institute with Nationwide chain travel institute.

RPG20 Air Conditioner Indoor Unit Motor Resin Packed AC Fan Motor

Item functions:
Use NSK lower sound large good quality rolling bearing.
Nickel plating for shaft, electrophoretic coating for enclosure.
Affordable composition, higher performance, lower temperature increase, low noise, tiny vibration.

lowest noise EPTest daily life motor.
220V AC insulation class :EPT
Resin Packed Motor for indoor air conditioner
motor can be customized

Information:

Rated Voltage	220V
EPT Selection	20W
RPM	1370rpm/min
Type	AC Motor

Much more Choices:

Design	EPT	Voltage	Frequency	Existing	Poles	Pace	Sounds	Capacitor
Design	(W)	(V)	(HZ)	(A)	(P)	(RPM)	(DEPT)	( muF)
YDK-six-4	six	220	fifty/sixty	.13	4	800-1200	lt36	.six
YDK-10-four	10			.fifteen		800-1300		1
YDK-12-four	12			.fifteen		800-1500		1.2
YDK-17-four	17			.20		1300/1150/1000		one.2
YDK-eighteen-four	eighteen			.19		800-1500		1.5
YDK-19-four	19			.23		800-1500		1.five
YDK-20-4	twenty			.twenty five		800-1370		one.two
YDK-22-four	22			.28		800-1500		2
YDK-25-4	twenty five	220-240	sixty	.28		800-1300		one.5

Rewards:

ODM
Fast Reaction
Good interaction
Specialist teamwork
Target and Commitment
Improve the transport and assist you preserve the expense

Providers:

ODM
1. Dependent on our team’s EPTful planning and production potential, customers’ EPT requirements of the motors and followers, incXiHu (West Lake) Dis.Hu (West Lake) Dis. overall performance parameters and mounting dimensions, will be flawlessly fulfilled.
two. The beneficial ODM co-operative relation will be warmly estabEPTd with EPT and loyalty.

EPT Guarantee
1. All motors from EPT are produced by strictly following the ISO9001 good quality administration technique.
2. All motors enEPT at least two complete a long time warranty since leaving the manufacturing unit.
three. 100% replacement is guaranteed for any defect amongst the warranty period.

1-end services
1. EPT Motor is not only a quality and aggressive goods manufacturing amp income EPTrprise, but also a reputable remedy supplier for clients about the world.
two. From fast desire reaction, specialist and large productive pursuing up, to supporting enhance delivery amp help save value, offering overEPT specialized assist, EPT Motor will guarantee buyers the best matched motors and supporters, as well as the very best services.
3. Clients and partners will acquire the marketplace with out any problems guiding, relying on trusTec team’s after-sale provider as a heat and EPTful assistance.

Company Information

Known for motors production, HangZhou EPT Motor Co.,Ltd is an ISO9001 amp ISO14001 Factory with above fifteen several years in producing and trading.EPTecause of our previous 15 year’s experience, we are effectively competent to consider care of your pursuits.

We have exported several lines to EPTrazil, EPT, Mainland EPT, Southeast Asia , Center EPT, Egypt and African nations around the world, exactly where the customers all fulfill the EPT fantastic performance and items quality.

Rely on EPT administration, the introduction of international sophisticated creation EPT and tools, we have devoted to continuous innovation for overall remedy and swift support to implement our buyer connection.

Our business dependent on the functioning philosophy of quotHonesty furthermore Thoroughness, Reputation with EPT, and Diligence to Innovate, quot and we continuously innovated and improved itself to have provided buyers with higher top quality and large overall performance, Reputation for survival quot we depend on excellent quality, high performance, and ideal solutions to welcome you.

in Hannover Germany sales price shop near me near me shop factory supplier Rpg20 Air Conditioner Indoor Unit Motor Resin Packed AC Fan Motor manufacturer best Cost Custom Cheap wholesaler

in Novokuznetsk Russian Federation sales price shop near me near me shop factory supplier Ydk120-50-6 AC Asynchronous Motor Synchronous Motor for Split Air Conditioner manufacturer best Cost Custom Cheap wholesaler

in Novokuznetsk Russian Federation sales price shop near me near me shop factory supplier Ydk120-50-6 AC Asynchronous Motor Synchronous Motor for Split Air Conditioner manufacturer best Cost Custom Cheap wholesaler

Maintaining in thoughts that great provider is the key to cooperating with consumers, we attempt to meet up with higher top quality requirements, offer aggressive rates and guarantee prompt shipping. In the meantime, our items are produced in accordance to high good quality specifications, and complying with the international superior normal standards. Innovative thermo treatment method tools, these kinds of as network warmth treatment oven, multi-use thermo treatment oven, and many others. SHN Motors

one.Features
one). Large performance
two). EPT functioning lifestyle
three). Low sounds
four). Good temperature increase
5). Great stability
6). The most accessible layout for the optimized managing.

two.Related Specifications

Variety	Vol.Tre	Static Push	Output	Input	Current	Pace	Airflow	Sound
	V/Hz	Pa	W	W	A	R/Min	M3/H	dEPT(A)
YDK-one hundred-6	220V/50Hz	twenty five-one hundred twenty five	one hundred	232	1.16	890	four hundred-1400	le44
YDK-one hundred thirty five-6	220V/50Hz	twenty five-a hundred twenty five	a hundred thirty five	260	one.two	910	700-1500	le46
YDK-a hundred and eighty-six	220V/50Hz	40-150	180	400	one.nine	1120	a thousand-2000	le48
YDK-220-6	220V/50Hz	40-one hundred fifty	220	400	one.seven	980	1200-2500	le49
YDK-250-six	220V/50Hz	forty-a hundred and fifty	270	440	2.	880	1600-2700	le50
YDK-300-6	220V/50Hz	50-150	300	560	two.6	1120	1900-3400	le52
YDK-400-6	220V/50Hz	50-one hundred fifty	four hundred	640	2.9	1140	2200-3500	le57
YDK-550-6	220V/50Hz	100-a hundred and eighty	550	1050	4.7	1100	2000-3000	le59
YDK-650-6	220V/50Hz	a hundred and twenty-250	650	1180	five.five	1250	2000-3000	le62
YDK-750-six	220V/50Hz	one hundred twenty-250	750	1320	6	1300	2000-3000	le62

Kind	HP	Volts	Frence	Velocity	Present	Captical	Cross Reference
YDK-one hundred twenty-6F	1/2	208-230	60Hz	1075	1.0A	five muF/370V	EMERSON 1859
YDK-185-6F	one/4	208-230	60Hz	1075	1.7A	five muF/370V	EMERSON 1860
YDK-245-6F	1/three	208-230	60Hz	1075	2.1A	7.five muF/370V	EMERSON 1861
YDK-370-6F	one/two	208-230	60Hz	1075	3.0A	10 muF/370V	EMERSON 1862
YDK-550-6F	3/4	208-230	60Hz	1075	4.6A	10 muF/370V	EMERSON 1868
YDK-ninety-8F	1/eight	208-230	60Hz	825	1.0A	5 muF/370V	EMERSON 1872
YDK-120-8F	1/six	208-230	60Hz	825	one.2A	5 muF/370V	EMERSON 1873
YDK-185-8F	one/4	208-230	60Hz	825	one.9A	five muF/370V	EMERSON 1874
YDK-245-8F	1/three	208-230	60Hz	825	two.1A	seven.five muF/370V	EMERSON 1875
YDK-185-6FS	1/four	208-230	60Hz	1075/3SPD	1.7A	five muF/370V	EMERSON 1971
YDK-245-6FS	1/three	208-230	60Hz	1075/3SPD	2.7A	5 muF/370V	EMERSON 1972
YDK-370-6FS	1/two	208-230	60Hz	1075/3SPD	three.7A	7.5 muF/370V	EMERSON 1973

3.Outlines/Drawings

4.Production Movement

5.Principal Goods

6.Programs

seven.Package deal and Delivery

one.FedEX / DHL / UPS / TNT for samples,Door to door services
2.EPTy sea for batch merchandise
3.Customs specifying freigEPT EPTers or negotiable shipping and delivery methods
4.Shipping and delivery Time:20-twenty five DaEPTfor samples30-35 DaEPTfor batch merchandise
5.Payment Terms:T/T,L/C at sight,D/P and so forth.

eight.FAQ
Q1. When can I get the quotation?
We usually estimate inside of 24 hours following we get your inquiry.
If you are urgent to get the value, you should send the concept on and or contact us immediately.

Q2. How can I get a sample to check your top quality?
After cost verified, you can requiry for samples to check high quality.
If you require the samples, we will demand for the sample expense.
EPTut the sample value can be refundable when your amount of first orEPTis over the MOQ

Q3. Can you do OEM for us?
Yes, the solution EPT can be created as you want.

This autumn. How about MOQ?
one pcs for carton box.

Q5. What is your primary market?
EPTern Europe, Southeast Asia, South The united states.

Remember to truly feel cost-free to get in touch with us if you have any concern.

ac-motor

Mail:[email protected]

Tag Archives: air conditioner motor

China manufacturer Cbb65 Sh Capacitor AC Compressor Air Conditioner Parts Motor Capacitors High Quality vacuum pump distributors

Product Description

What role do AC motors play in HVAC (heating, ventilation, and air conditioning) systems?

Are there energy-saving technologies or features available in modern AC motors?

What is an AC motor, and how does it differ from a DC motor?

China best AC Condenser Universal Fan Motor Rd-310-45-8K Air Conditioner Indoor Fan Motor with Hot selling

Product Description

What role do AC motors play in HVAC (heating, ventilation, and air conditioning) systems?

What are the safety considerations when working with or around AC motors?

What is an AC motor, and how does it differ from a DC motor?

China Hot selling Cbcbb65 450V AC Motor Run Capacitor 30UF 35UF 40UF 45UF 50UF 55UF 60UF 65UF for Air Conditioner vacuum pump diy

Product Description

How do variable frequency drives (VFDs) impact the performance of AC motors?

What are the safety considerations when working with or around AC motors?

Can you explain the basic working principle of an AC motor?

China Best Sales Wholesale Air Conditioner Parts AC Motor Capacitor Cbb60 Capacitor for Motor Run Applications supplier

Product Description

How do variable frequency drives (VFDs) impact the performance of AC motors?

What are the safety considerations when working with or around AC motors?

What is an AC motor, and how does it differ from a DC motor?

China Custom 24V-220V AC Reversible Dual Shaft Electric Motor with High Torque Low Rpm for Air Conditioner vacuum pump belt

Product Description

Can you explain the concept of motor efficiency and how it relates to AC motors?

Can AC motors be used in renewable energy systems, such as wind turbines?

How does the speed control mechanism work in AC motors?

Speed Control in Induction Motors:

Speed Control in Synchronous Motors:

China Standard AC Electric Indoor Air Conditioner Motor with Capacitor for Air Curtain Machine vacuum pump oil near me

Product Description

What role do AC motors play in HVAC (heating, ventilation, and air conditioning) systems?

How do AC motors contribute to the functioning of household appliances?

Can you explain the basic working principle of an AC motor?

in Raipur India sales price shop near me near me shop factory supplier Split 230V 50Hz Air Conditioner Window AC Price Condenser Fan Coil Unit Motor manufacturer best Cost Custom Cheap wholesaler

in Adelaide Australia sales price shop near me near me shop factory supplier 58 Series Power Saving Shaded Pole AC Fan Motor for Air Conditioner manufacturer best Cost Custom Cheap wholesaler

in Hannover Germany sales price shop near me near me shop factory supplier Rpg20 Air Conditioner Indoor Unit Motor Resin Packed AC Fan Motor manufacturer best Cost Custom Cheap wholesaler

in Novokuznetsk Russian Federation sales price shop near me near me shop factory supplier Ydk120-50-6 AC Asynchronous Motor Synchronous Motor for Split Air Conditioner manufacturer best Cost Custom Cheap wholesaler