Tag Archives: ac ac motor

Electrical Cost made in China – replacement parts – in Kakinada India AC Motor for Mini Washing Machine Top Loading with top quality

Electrical Cost made in China - replacement parts - in Kakinada India AC Motor for Mini Washing Machine Top Loading with top quality

We – EPG Group the largest gearbox & motors , couplings and gears manufacturing unit in China with 5 distinct branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

XD sequence Washing Device Motor

Motor Description:

one.Our motors performance(knowledge) are per customers` requirments.

2.Motor wires are cooper and some could be used aluminium wire to preserve value

3.Motors could be employed ball bearing and oil bear(Sleeve bearing) each.

four.Insulation Class B
withstand voltage:1800V/S/.5mA
Rotation:CW (view from the shaft side)
Noise<50dB
Interturn Isulation:>2100V
IP:00
Life span:>3800 Several hours (steady functioning).Normal use:10 many years
Operation Temperature/Humidity Range:-40°C to +65°C, %~ninety five%

5.Risk-free,reliable, lower sounds, large functionality,qualities tough, good and secure beginning, long lifestyle, and so on.

6.Common Application: Exhaust supporter, air purifier, micro-oven, admirer, induction cooker, refrigerator, pump, heater, hood oven, blwer, air conditioner, Heater machines, dehumidifiers

seven.Motor Specification as underneath chart

Model	Voltage (V)	Frequency (Hz)	Capacitor (μF)	Insulation Class	Rated Speed (R/min)	Output Electricity( W)	Efficiency %	Start Torque (N.m)	Max Torque (N.m)
XD-250	220	fifty	18	B	1350	250	fifty five	one.seven	2.five
XD-two hundred	220	50	15	B	1350	two hundred	54	1.5	2.two
XD-180	220	fifty	fourteen	B	1350	a hundred and eighty	52	one.4	2
XD-a hundred and fifty	220	50	13	B	1350	a hundred and fifty	fifty one	1.3	one.8
XD-a hundred thirty five	220	fifty	11	B	1350	one hundred thirty five	50	1.1	one.seven
XD-a hundred and eighty	110	sixty	50	B	1620	one hundred eighty	52	one.4	two
XD-a hundred and fifty	one hundred ten	60	48	B	1620	one hundred fifty	fifty one	one.three	1.8
XD-135	a hundred and ten	sixty	forty five	B	1620	a hundred thirty five	50	1.one	one.7
XD-a hundred and twenty	220	fifty	ten	B	1350	a hundred and twenty	forty five	one	1.4
XD-a hundred	220	50	10	B	1350	100	43	.eight	one.2
XD-eighty	220	fifty	6	B	1350	80	42	.six	.eight
XD-fifty	220	50	four	B	1350	fifty	40	.33	.five
XD-sixty	220	fifty	five	B	1350	60	42	.45	.six

Fine Wa ept target on offering motor options to sensible merchandise for house equipment ,like BLDC,Capacitor motor,shaded pole motor,universal motor and mini generator. Our motors are extensively used in kitchen,air conditional,Ice upper body,washing device,and so on. Buyers identify not only in China domestic ,also ove ept from Asia to European and Amecica. Our engineer with 20 many years expertise in motor design and advancement,win a whole lot of motor inovation technological innovation award,Our engineer also give specialized assistance to other large facotry.we believe we always can discover the best resolution for your item.

Organization FAQ

(1) Q: What sort motors you can offer?
A:For now,we largely give Kit ept Hood Motor,DC Motor,Equipment Motor,Enthusiast Motor Fridge Motor,Hair Dryer Motor Blender Motor Mixer Motor,
BLDC Motor,Shade Pole Motor,Capacitor Motor, PMDC Motor,Synchronous Motor,and so on

(2) Q: Is it possible to check out your factory
A: Confident. We often like to satisfy our buyer encounter to experience,this is far better for comprehension.But please kindly maintain us posted a handful of days in ept so we can make great arrangement.

(3) Q: Can I get some samples
A: It is dependent. If only a handful of samples for personal use or alternative, I am scared it will be tough for us to provide, simply because all of our motors are personalized made and no stock available if there is no more requirements. If just sample screening prior to the official buy and our MOQ, price tag and other conditions are suitable, we will supply samples.

(4) Q: Is there a MOQ for your motors?
A: Of course. The MOQ is between one thousand~10,000pcs for diverse models right after sample approval.
But it really is also okay for us to acknowledge smaller sized tons like a number of dozens, hundreds or hundreds
For the preliminary 3 orders following sample acceptance.For samples, there is no MOQ necessity. But the much less the far better (like no more than 5pcs) on situation that the amount is sufficient in scenario any changes necessary after preliminary testing.

(5)Q: What benefit do you have?

A: For motors, we have quality guarantee, if there is probelm motor right after inspection in client house,we will replace .
For provider, we supply 24 hours technological support and barrier-free communication with exceptional service folks.
Technological support: Except provide true motor goods,we can also offer motor specialized supporting seperately to our consumer.Our engineers are represent the most superior techonogy.

The use of unique tools manufacturer’s (OEM) element numbers or emblems , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our company and the listed substitute areas contained herein are not sponsored, accepted, or made by the OEM.

Electrical Cost made in China - replacement parts - in Kakinada India AC Motor for Mini Washing Machine Top Loading with top quality

Factory near me shop made in China – replacement parts – in Hamah Syrian Arab Republic Cost Ce UL AC Shaded Pole Motor for Forced Airflow Systems with top quality

Factory near me shop made in China - replacement parts - in Hamah Syrian Arab Republic Cost Ce UL AC Shaded Pole Motor for Forced Airflow Systems with top quality

We – EPG Group the largest gearbox & motors , couplings and gears manufacturing facility in China with 5 distinct branches. For a lot more specifics: Cell/whatsapp/telegram/Kakao us at: 0086~13 571 88828 13858117778 571 88828

Factory Price Ce UL AC Shaded Pole Motor for Forced Airflow Systems

Merchandise characteristic:
one. Stator size is optional
2. Secure, reliable, lower sound, excellent starting, long existence
3. Powerful electricity
Rated voltage a hundred and ten~120V/220~240V-fifty/60Hz

Normal utilized:
Exhaust admirer, air purifier, micro-oven, enthusiast, induction cooker, fridge, pump, heater, hood oven, blwer, air conditioner, Heater machines, dehumidifiers .

Thermal protector with one particular shot fuse or multi shot fuse

Product	STATOR Dimensions	SHAFT DIA	VOLT	Enter Energy	TORQUE (g.cm)	Speed RATED
YJ4808B	8mm	4mm	one hundred ten-240V	6W	1.12mN.m	3400RPM
YJ4810B	10mm	4mm	one hundred ten-240V	10W	three.42mN.m	3000RPM
YJ4810C	10mm	5mm	110-240V	14W	three.82mN.m	3000RPM
YJ4815B	15mm	4mm	110-240V	11W	seven.97mN.m	3400RPM

ABOUT US

Ritscher group was proven in 2006.we constantly concentrate on micro-motors for house and industrial electrical appliance.At present, we hav are specialist micro-motor factories separatlly positioned in ZheJiang & ZHangZhoug province.It has 50,000 sq. meters vegetation and far more than 500 personnel, annual output is 5 million pcs and has 10 million pcs annual creating potential.Soon after many years development,we built a wonderful track record in the domestic and oversea market and have the trust from our global buyers.
We started out our enterprise from shaded pole motors, after 10 many years growth,our merchandise is enlarged to BLDC motors ,capacitor motors ,synchronous motors,stepping motors,servo motors, and PMDC motors.Our goods are broadly employed for creating refrigerators, freezers, micro-wave ovens, air heaters, air exhausters, ventilators,ovens, air filter, therapeutic massage machines and several other equipments.
To design and style the lastest technology motors and fulfill our buyers requirments,we have the really capable R&D team,to ensure our items high quality ,we have very rigorous deal with system for our production department & QC department,to make our expense decrease,we have the extremely professional obtain department, We devote to make each and every specifics much better than we could do.
To supply rapid and far better provider to our clients in Australia and New Zeland,we set up department business office in Australia given that 2017 with exprienced expert to help the company ,which will deliver a lot more consumers to get know of us.

We will hold doing our job,transfer ahead phase by phase to make our enterprise region wider and brighter.

Our business FAQ for you

(1) Q: What variety motors you can provide?
A:For now,we largely give Kitchen Hood Motor,DC Motor,Gear Motor,Fan Motor Refrigerator Motor,Hair Dryer Motor Blender Motor Mixer Motor,
Shade Pole Motor,Capacitor Motor,BLDC Motor PMDC Motor,Synchronous Motor,Stepping Motor and so on.

(2) Q: Is it achievable to pay a visit to your manufacturing unit
A: Confident. But please kindly preserve us posted a number of days in progress. We want to check our
schedule to see if we are obtainable then.

(3) Q: Can I get some samples
A: It depends. If only a handful of samples for personalized use or substitution, I am scared it will
be hard for us to supply, because all of our motors are custom produced and no inventory
accessible if there is no more demands. If just sample tests just before the official order and
our MOQ, price tag and other terms are suitable, we would adore to provide samples.

(4) Q: Is there a MOQ for your motors?
A: Yes. The MOQ is amongst 1000~10,000pcs for various models after sample acceptance.
But it truly is also alright for us to settle for more compact heaps like a handful of dozens, hundreds or hundreds
For the original 3 orders after sample approval.For samples, there is no MOQ need. But the significantly less the far better (like no more than 5pcs) on situation that the amount is enough in case any alterations necessary soon after preliminary screening.

The use of original tools manufacturer’s (OEM) element figures or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our business and the outlined substitute elements contained herein are not sponsored, accepted, or produced by the OEM.

Factory near me shop made in China - replacement parts - in Hamah Syrian Arab Republic Cost Ce UL AC Shaded Pole Motor for Forced Airflow Systems with top quality

POM 3 phase ac squirrel cage motor Cost made in China – replacement parts – in Bobo-Dioulasso Burkina Faso OEM Custom Machine Drive Involute Precision Transmission Worm Gear with top quality

POM 3 period ac squirrel cage motor Cost produced in China - replacement elements - in Bobo-Dioulasso Burkina Faso OEM Personalized Machine Drive Involute Precision Transmission Worm Equipment with leading good quality

We – EPG Team the most significant worm gearbox, couplings and gears factory in China with 5 different branches. For a lot more details: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /

OEM POM customized equipment travel involute precision transmission worm gear

Merchandise	Customized machined injection plastic gears
Craft Method	Plastic Injection or CNC machining
Plastic Granules	UL, Food and drug administration, RoHS and so forth.
Quality Management	ISO9001 and ISO14001
Molds Material	S316,H13,718,738,P20,H13,420SS
Mold Lifestyle	three hundred,000 shots or 1,000,000 shots or far more
Mold Cavity	One-cavity or two cavities or Multi-cavity
Substance	Nylon, PA66, NYLON with 30% glass fibre, Stomach muscles, PP,Personal computer,PE,POM,PVC,PU,TPR,TPE,TPU,PA,PET,HDPE,PMMA and many others.
Molds cavity Hardness	sixty to 90 H.R.C
Dimension/Shade	Gears and parts proportions are according to drawings from customer, and colours are tailored
Floor treatment	Polished or matte surface, portray, texture, vacuum aluminizing and can be stamped with logo etc.
Measurement Tolerance	±0.05mm or much more specific
Work Circulation chart	Step1: Make tooling first of all and usual need 2~~3 months. Step2: Generate and affirm samples. Step3: One 7 days for mass production typical.
Samples affirmation and acceptance	Totally free samples delivered for confirmation and shipping value paid by clients
Deal	Internal very clear plastic bag/exterior carton/wooden pallets/ or any other special bundle as for each customer’s demands.
Shipping and delivery Time	Total normally takes 2~~4weeks normal
Payment Terms	PAYPAL, T/T, Western Union
Shipping	Common FEDEX, UPS, DHL, TNT, EMS or foundation on customer’s need.

FAQ

Q1: How to promise the Quality of gears and parts?
We are ISO 9001:2008 accredited factory and we have the integrated system for industrial areas high quality management. We have IQC (incoming good quality manage),
IPQCS (in procedure top quality handle area), FQC (last good quality manage) and OQC (out-going good quality control) to management every single procedure of industrial parts prodution.

Q2: What are the Gain of your gears and components?
Our gain is the aggressive and affordable costs, quickly shipping and delivery and substantial high quality. Our eployees are responsible-oriented, pleasant-oriented,and dilient-oriented.
Our industrial components merchandise are featured by rigid tolerance, easy complete and long-lifestyle efficiency.

Q3: what are our machining equipments?
Our machining equipments contain plasticn injection machinies, CNC milling equipment, CNC turning equipment, stamping devices, hobbing equipment, computerized lathe equipment, tapping equipment, grinding machines, slicing equipment and so on.

This fall: What shipping and delivery techniques do you use?
Generally, we will use UPS DHL or FEDEX and sea shipping

five: What components can you method?
For plastic injection gears and parts, the components are Nylon, PA66, NYLON with 30% glass fibre, Abs, PP,Pc,PE,POM,PVC,PU,TPR,TPE,TPU,PA,PET,HDPE,PMMA and many others.
For metal and machining gears and components, the resources are brass, bronze, copper, stainless steel, metal, aluminum, titanium plastic etc.

Q6: How lengthy is the Delivery for Your gears and components?
Typically , it will get us fifteen wor ept days for injection or machining, and we will try to shorten our guide time.

/ The use of first products manufacturer’s (OEM) element figures or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating merchandise use and compatibility. Our organization and the outlined replacement elements contained herein are not sponsored, accepted, or produced by the OEM. /

POM 3 period ac squirrel cage motor Cost produced in China - replacement components - in Bobo-Dioulasso Burkina Faso OEM Customized Device Travel Involute Precision Transmission Worm Equipment with leading quality

AC best made in China – replacement parts – in Mwanza United Republic of Tanzania Motor 3kw48V for General EPT and Electric Vehicle with top quality

AC best made in China - replacement parts - in Mwanza United Republic of Tanzania Motor 3kw48V for General EPT and Electric Vehicle with top quality

We – EPG Team the greatest gearbox & motors , couplings and gears manufacturing unit in China with 5 diverse branches. For a lot more details: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

AC Induction Motor 3KW3000rpm48V EIF-AS348

Very first, make sure you have a Quick See if this product is you are loo ept for:

one. Our EIF-AS348 rated at 3kw3000rpm48VDC can have rated torque at 9.55Nm, rated current at 74A, peak velocity is 6000rpm, peak existing is 250A. More Model listing.

EIF AC Induction Motor DC Energy Provided Technological Specification

Rated Energy	Rated Voltage	Rated Speed	Rated Torque	Peak Electricity
3KW	24V/48V	3000rpm	9.55NM	6KW
5KW	48V/60V/72V	3000rpm	fifteen.2NM	10KW
seven.5KW	48V/60V/72V/96V/108V/144V	3000rpm	22.3NM	16KW
10KW	60V/72V/96V/108V/144V	3000rpm	31.8NM	24KW
15KW	96V/108V/144V	3000rpm	47.7NM	32KW
22KW	96V/108V/144V	3000rpm	70.1NM	50KW
30KW	310V	3000rpm	95.5NM	75KW
60KW	310V	3000rpm	191NM	150KW

General ept EIF AC Induction Motor AC Electricity Supplied Complex Specification

Rated Energy	Rated Voltage	Rated Velocity	Rated Frequency	Poles
.5-1600KW	220V/230V/380V/6kv/10kv	1500/3000rpm	fifty/60Hz	2/4/6

***make sure you see this portion underneath general ept induction motor***

Matching drive EIF-ASD348, can uncover this one under our “ac induction motor push” in produced-in-china, or get specification from our EIFPMG site.

2. It can be commonly used for electric powered truck, electric bus, cnc equipment tools, mining mechnical equipments as driving electricity and you need to have the proper handle approach preset by our matching push.
three. Please examine the drawing under to see if suitable for you. We can also personalize for distinct apps.
four. Make sure you deliver your specifics to get technological session for your actual utilization

Please see video clips of check and software at

EIFPMG youtube channel )

Take a look at Report Info: please get complete check report from our complex department .

A C I N D U C T I O N D R I V I N G S Y S T E M
Model No	EIF-AS348		Model No.	17.09
Product Sort	ac induction
Implement for	New Energy Electric Cars, Standard Business
Test Regular	GB/T18488.1-2015≤EV DRIVING Program Portion One particular:Technological CONDITIONS≥GB/T18488.2-2015≤EV DRIVING Technique Component One:Specialized Problems Element TWO: Test METHOD≥
1, Principal Parameters
Motor Parameters	Identify	AC INDUCTION MOTOR	Model No		EIF-AS348
	Normal	GB/T18488.1-2015	Cooling Method		air cooling
	Link Strategy	Y	Made in		China
	Rated Electrical power(kW)	three	Peak Energy(kW)		six
	Rated Torque(Nm)	9.55	Peak Torque(Nm)		20
	Rated Voltage(VDC)	48	Insulation Grade		F
	Security Quality	IP65	Wor ept Approach		S1,S2, S9
	Excess weight(Kg)	≤20Kg	Dimension(mm)		219×200×281

Common Drawing: we have recent options of sq. and spherical shaped. Can customise if you have unique need.

What we will do for you:
1. offer specialized consultant just before get and confirm your actual technical requirement in accordance to your description on use within 1-3 wor ept days
2. offer the right and accredited below severe top quality inspection technique stepper motor model inside of 10 times(if customized design,we will recheck the supply time)
three. provide specialized support when the motor arrives you, to make certain you can operate your device efficiently with our motor
four. provide 1 year guarantee, and complete daily life technical support
5. constantly update our merchandise details with you.

You should have a general impact on our rigorous generation by pictures:

Our energy for motor and generate program in electrical vehicle and automation field application : about EIFMotor
2012-2013: Dependent on our production and RD ability of long lasting magnet generator, we began to build everlasting magnet brushless motor for electrical motor vehicle, and expanded motor applications to general ept use with its high effectiveness.
2014: We expanded motor enterprise to brushless dc, stepper/servo, asynchronous motor generate program, and manufactured it as an critical seperate component of organization EIFMOTOR.
2015-2018: We improved our motor strengths on facets: boost motor test line, combine servo motor, travel with gearbox to fulfil as clever unit, expand purposes of asynchrnous motor to be a special custom-made motor part For an additional component, we have cooperation with SUNATE EV, we can help EV assembly line building assignments, and provide our motor generate system with each other.

Now we have EIFMotor absorbedly strengthening automation and EV motor drive system discipline applications. We are putting our passion and hard work in this excellent work.

You should adhere to us at web site, facebook, twitter and youtube channel and increase automation and EV motor applications up collectively!

The use of authentic gear manufacturer’s (OEM) portion quantities or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our company and the outlined replacement parts contained herein are not sponsored, approved, or made by the OEM.

AC best made in China - replacement parts - in Mwanza United Republic of Tanzania Motor 3kw48V for General EPT and Electric Vehicle with top quality

Electric wholesaler made in China – replacement parts – in Johor Bahru Malaysia AC Induction Fan Motor for Oxygen Pump Air Heater Exhaust Fan with top quality

Electric wholesaler made in China - replacement parts - in Johor Bahru Malaysia AC Induction Fan Motor for Oxygen Pump Air Heater Exhaust Fan with top quality

We – EPG Team the most significant gearbox & motors , couplings and gears manufacturing unit in China with 5 diverse branches. For far more details: Cell/whatsapp/telegram/Kakao us at: 0086~13 571 88828 13858117778 571 88828

YJ60 5-200W high effectiveness AC Pulverizer Motor

Merchandise characteristic:
one. Stator dimensions is optional
2. Safe, trustworthy, minimal noise, good starting up, long life
3. Sturdy electricity
Rated voltage a hundred and ten~120V/220~240V-fifty/60Hz

Normal used:
Exhaust supporter, air purifier, micro-oven, supporter, induction cooker, fridge, pump, heater, hood oven, blwer, air conditioner, Heater equipment, dehumidifiers
Thermal protector with a single shot fuse or multi shot fuse

Product	A OF Measurement	SHAFT DIA	VOLT	Power	TORQUE	Pace RATED
YJ607A	7MM	three.17MM	110-240V	10W	2.90mN.m	3000RPM
YJ6571A	10MM	4MM	110-240V	6W	three.60mN.m	3000RPM
YJ6571B	10MM	4MM	a hundred and ten-240V	13W	five.46mN.m	3000RPM
YJ6011B	11MM	4MM	a hundred and ten-240V	10W	6.85mN.m	3000RPM
YJ6012C	12MM	5MM	one hundred ten-240V	11W	8.49mN.m	3000RPM
YJ6017C	17MM	5MM	a hundred and ten-240V	20W	sixteen.13mN.m	3000RPM
YJ6017D	17MM	6MM	a hundred and ten-240V	18W	thirteen.56mN.m	3000RPM
YJ6571C	20MM	5MM	110-240V	20W	23.30mN.m	3000RPM
YJ6571D	28MM	6MM	110-240V	35W	forty seven.93mN.m	3000RPM

Our firm FAQ for you

(1) Q: What variety motors you can provide?
A:For now,we mostly provide Kitchen Hood Motor,DC Motor,Equipment Motor,Fan Motor Fridge Motor,Hair Dryer Motor Blender Motor Mixer Motor,
Shade Pole Motor,Capacitor Motor,BLDC Motor PMDC Motor,Synchronous Motor,Stepping Motor and so on.

(2) Q: Is it possible to check out your factory
A: Sure. But you should kindly preserve us posted a handful of times in advance. We require to check out our
timetable to see if we are accessible then.

(3) Q: Can I get some samples
A: It is dependent. If only a few samples for personal use or replacement, I am afraid it will
be challenging for us to give, simply because all of our motors are custom made manufactured and no inventory
accessible if there is no further demands. If just sample testing before the official get and
our MOQ, cost and other phrases are satisfactory, we would love to provide samples.

(4) Q: Is there a MOQ for your motors?
A: Indeed. The MOQ is in between a thousand~ten,000pcs for distinct versions right after sample acceptance.
But it is also okay for us to take smaller tons like a handful of dozens, hundreds or hundreds
For the preliminary 3 orders after sample approval.For samples, there is no MOQ prerequisite. But the significantly less the greater (like no much more than 5pcs) on situation that the amount is enough in case any alterations needed following original screening.

ABOUT US

Ritscher group was set up in 2006.we always target on micro-motors for family electrical appliance and industry equipment given that environment up.currently we have two specialist micro-motor factories in China which severally positioned in HangZhou metropolis and HangZhou metropolis.it has an region of 25,000 sq. meters vegetation and much more than 300 staff, yearly output is 3 million pcs and has 5 million pcs once-a-year generating potential.right after several many years improvement,we had developed a excellent track record in the market place and received a lot more and a lot more customers’ trust in the planet.
We commenced from shaded pole motors at commencing, up to now,our product included of shaded pole motors,synchronous motors,stepping motors ,capacitor motors, BLDC motors, DC motors and compressors. Our item are widely utilized for creating fridges, freezers, micro-wave ovens, air heaters, air exhausters, ventilators,ovens, air filter, therapeutic massage equipment and several other equipments.
As a realiable good quality guaranty,Ritscher has complete R&D departement,QC division,creating section,obtain office and so forth. has ideal creating equipment like Aluminum diecasting, Zinc diecasting, Sheet steel stamping, Plastic injection molding etc. also check/ detection unit like multiplex temp measuring unit, efficiency parameter inspection system, Phenol peptide answer pinhole tester,Anechoic room and so forth.

Endeavoring to provide the very best item and support to customers,we often do the most effort to become an fantastic company of micro motors.
Ritscher is often willing to establish sincere company romantic relationship with buddies from all above the planet.
Welcome get in touch with with us!

Just take ritscher ,appreciate modern life!

The use of unique tools manufacturer’s (OEM) part figures or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating merchandise use and compatibility. Our business and the listed alternative areas contained herein are not sponsored, approved, or produced by the OEM.

Electric wholesaler made in China - replacement parts - in Johor Bahru Malaysia AC Induction Fan Motor for Oxygen Pump Air Heater Exhaust Fan with top quality

315L2-6 manufacturer made in China – replacement parts – in Khabarovsk Russian Federation Y Three Phase AC Asynchronous Motor with top quality

315L2-6 company made in China - substitute areas - in Khabarovsk Russian Federation Y Three Stage AC Asynchronous Motor with top good quality

We – EPG Group the most significant gearbox & motors , couplings and gears manufacturing unit in China with 5 different branches. For far more details: Cellular/whatsapp/telegram/Kakao us at: 0086~13 571 88828 13858117778 571 88828

Creation Description

YE2 Sequence Cast of Iron 3 Period Induction Motor is specially made for European market, whose terminal box is found on
the prime of motor.They are entirely enclosed and enthusiast-cooling developed. They are newly created in conformity with the pertinent
requirements / principles of IEC&DIN42673 expectations.

Type	YE2
Power	.75~315kw
Insulation	F / B, H/B
Voltage and frequency	380/four hundred/415/660/690V 50/60hz
Pace	3000/1500/one thousand/750/600 rpm
Mounitng	IMB3/IMV1
Cooling and ventilation	TEFC in accordance with IC411 of IEC60034-6.
Winding	a hundred% Cooper Wire
Protection class	IP54/IP55
Vibration	vibration class A, vibration class B is available on request.
Quality assurance	ISO9001
Site conditions	from -15°C t0 +40°C and altitude below 1000 meters

Products Application, Value Added Service

PinnxunMotor can provide a complete set of optimal solutions for various Applications,Bring innovation and valueadded to our
consumers, At the same time, we can also formulate special solutions according to the different needed of customer

Merchandise Process

Pinnxun often just take good faith, obligation, carefulness and excellence as our administration philosophy, committedto offering
buyers with superior top quality merchandise,every single stage in processs should be get complete interest.

Qualification certification program

The important for ‘Pinxing’ long-phrases cooperation is to continuously boost the good quality of is items and provider, By virtue of is
extensive approach, quality administration method and rigorous compliance with worldwide mainstream requirements.’Pinxing’
has set up a high quality administration method that has passed ISO9001-2008 Good quality administration program certification

ISO14001 Environmental administration method.
ISO9001-2008 High quality administration method
ISO14001 Environmental administration program
CE European Certification
IECEX Globally Ex Certification for Ex motors
ATEX European Ex Certification for Ex motors
EAC Russia GOST common Ex certification for Ex motors
CQC China quality heart strength conservation certification

Around the world Advertising and marketing & Support Network

International Excellent Advertising support network is one of Pinxing’s gain. we have 38 branches in china major town,5 branches in
the Overseas ,Our organization penetrates much more than sixty nations around the world and areas like South The us, North The usa,Europe, Asia
Center East and Africa, Supplying us quick get to capacity from income, services, procurement and Transportation since inception, Pinxing
always uphold the advancement approach of market globalization. we phase and situation buyers needs and concentrate on market. our
items and service are widely utilised in worldwide market, and overall performance stable and security.we custom made diverse motors for distinct
industries

The use of unique products manufacturer’s (OEM) element numbers or emblems , e.g. CASE® and John Deere® are for reference needs only and for indicating merchandise use and compatibility. Our business and the detailed substitution parts contained herein are not sponsored, accepted, or made by the OEM.

315L2-6 company manufactured in China - alternative parts - in Khabarovsk Russian Federation Y A few Section AC Asynchronous Motor with leading high quality

50mm Cheap made in China – replacement parts – in Madrid Spain Good Quality Low Noise 1rpm AC Synchronous Gear Motor with top quality

50mm Cheap made in China - replacement parts - in Madrid Spain Good Quality Low Noise 1rpm AC Synchronous Gear Motor with top quality

We – EPG Group the largest gearbox & motors , couplings and gears factory in China with 5 distinct branches. For more particulars: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

50mm good quality lower sound 1rpm ac synchronous equipment motor

one)motor specification:

two)Programs:
Laminator, Paper Shredder, Rotating Christmas Tree Stand, enthusiast, electrical oven, grill.

two.Generation Flow

three.Organization Information

In current ten several years, Derry has been committed to the manufacture of the motor merchandise and the principal items can be categorized into the subsequent collection, specifically DC motor, DC equipment motor, AC motor, AC gear motor, Stepper motor, Stepper equipment motor, Servo motor and Linear actuator series.

Our motor items are commonly used in the fields of aerospace business, automotive market, economic gear, home appliance, industrial automation and robotics, health-related equipment, office equipment, pac ept machinery and transmission industry, supplying customers dependable personalized solutions for driving and managing.

4.Our Companies

1). General Service:

Rapid Reply	All enquiry or electronic mail be replied in 12 several hours, no delay for your business.
Specialist Group	Inquiries about merchandise will be replied skillfully, specifically, greatest advice to you.
Quick Guide time	Sample or tiny purchase despatched in 7-fifteen days, bulk or customized purchase about thirty days.
Payment Decision	T/T, Western Union,, L/C, and so on, easy for your enterprise.
Prior to shipment	Get photographs, send out to clients for confirmation. Only confirmed, can be transported out.
Language Decision	Aside from English, you can use your own language by electronic mail, then we can translate it.

two). Customization Services:

Motor specification(no-load speed , voltage, torque , diameter, noise, life, testing) and shaft length can be tailor-produced in accordance to customer’s needs.

5.Bundle & Shipping

The use of authentic tools manufacturer’s (OEM) component figures or emblems , e.g. CASE® and John Deere® are for reference purposes only and for indicating item use and compatibility. Our company and the outlined replacement elements contained herein are not sponsored, accredited, or manufactured by the OEM.

50mm Cheap made in China - replacement parts - in Madrid Spain Good Quality Low Noise 1rpm AC Synchronous Gear Motor with top quality

Ce manufacturer made in China – replacement parts – in Eskisehir Turkey 5415 AC Universal Eletrical Electric Motor for Mixer Blender Agriculture Machinery with top quality

Ce manufacturer made in China - replacement parts - in Eskisehir Turkey 5415 AC Universal Eletrical Electric Motor for Mixer Blender Agriculture Machinery with top quality

We – EPG Team the most significant gearbox & motors , couplings and gears manufacturing unit in China with 5 various branches. For much more specifics: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

Attribute
one. Stator measurement is optional
2. Safe, dependable, low sound, excellent starting, extended life
three. Robust power
Rated voltage a hundred and ten~120V/220~240V-50/60Hz
Common employed: foodstuff procedure,industrial equipment ,family appliances
Thermal protector with a single shot fuse or multi shot fuse


voltage	a hundred~127V220~240VAC
Frequency	fifty~60Hz
electricity	five-600W
application	meat mixer

ABOUT US

Ritscher team was set up in 2006.we usually concentrate on micro-motors for house electrical appliance and ept appliance given that setting up.presently we have two specialist micro-motor factories in China which severally found in HangZhou town and HangZhou town.it has an spot of 25,000 sq. meters crops and far more than three hundred employees, yearly output is 3 million pcs and has 5 million pcs once-a-year making potential.soon after numerous several years development,we experienced built a wonderful reputation in the marketplace and got a lot more and far more customers’ ept in the globe.
We started from shaded pole motors at commencing, up to now,our solution included of shaded pole motors,synchronous motors,stepping motors ,capacitor motors, BLDC motors, DC motors and compressors. Our solution are widely utilised for ma ept fridges, freezers, micro-wave ovens, air warmers, air exhausters, ventilators,ovens, air filter, therapeutic massage machines and numerous other equipments.
As a realiable quality guaranty,Ritscher has total R&D departement,QC office,producing office,purchase section and so forth. has best producing equipment like Aluminum diecasting, Zinc diecasting, Sheet steel stamping, Plastic injection molding and many others. also examination/ detection device like multiplex temp measuring system, efficiency parameter inspection gadget, Phenol peptide remedy pinhole tester,Anechoic space and so on.

Endeavoring to give the ideal solution and services to clients,we often do the most energy to turn out to be an exceptional company of micro motors.
Ritscher is constantly ready to set up honest enterprise romantic relationship with pals from all more than the world.
Welcome get in touch with with us!

Get ritscher ,appreciate present day life!

Our firm FAQ for you

(1) Q: What kind motors you can offer?
A:For now,we mainly give Package ept Hood Motor,DC Motor,Equipment Motor,Enthusiast Motor Refrigerator Motor,Hair Dryer Motor Blender Motor Mixer Motor,
Shade Pole Motor,Capacitor Motor,BLDC Motor PMDC Motor,Synchronous Motor,Stepping Motor and so on.

(2) Q: Is it feasible to check out your manufacturing facility
A: Certain. But you should kindly hold us posted a handful of times in advance. We need to have to examine our
plan to see if we are available then.

(3) Q: Can I get some samples
A: It depends. If only a few samples for individual use or substitute, I am frightened it will
be difficult for us to supply, because all of our motors are custom manufactured and no stock
available if there is no more demands. If just sample screening just before the official buy and
our MOQ, price tag and other phrases are appropriate, we’d really like to give samples.

(4) Q: Is there a MOQ for your motors?
A: Of course. The MOQ is among a thousand~10,000pcs for distinct versions soon after sample acceptance.
But it truly is also all right for us to settle for smaller heaps like a handful of dozens, hundreds or thousands
For the original 3 orders right after sample acceptance.For samples, there is no MOQ need. But the much less the greater (like no more than 5pcs) on problem that the quantity is ample in scenario any changes needed after first tests.

The use of original tools manufacturer’s (OEM) portion numbers or logos , e.g. CASE® and John Deere® are for reference functions only and for indicating merchandise use and compatibility. Our company and the listed alternative areas contained herein are not sponsored, accepted, or created by the OEM.

Ce manufacturer made in China - replacement parts - in Eskisehir Turkey 5415 AC Universal Eletrical Electric Motor for Mixer Blender Agriculture Machinery with top quality

High price made in China – replacement parts – in Shimkent Kazakhstan Quality AC Electric Single Phase Table Pedestal Fan Motor for Stand Fan with top quality

High price made in China - replacement parts - in Shimkent Kazakhstan Quality AC Electric Single Phase Table Pedestal Fan Motor for Stand Fan with top quality

We – EPG Group the largest gearbox & motors , couplings and gears manufacturing unit in China with 5 distinct branches. For much more details: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

Higher Quality AC Electrical/Single Period/Desk/Pedestal Admirer Motor for Stand Supporter

Product characteristic
(1) Adopting alternating current one-period potential machine and matching
(2) Output Pace: 600-920rpm
(3) Capacitor decision
15W-20W—————-1.5uF
25W-30W—————-2.0uF
45W-50W—————2.5uF
55W-60W—————3.0uF

Electrical specification

Product	VOLTAGE(VAC)	FREQUENCY(HZ)	OUT Electrical power(W)	Pace RATER(RPM)	Current(A)	INSULATION Course
YP-120-50	one hundred twenty/230	fifty/sixty	one hundred fifty	1750	.ninety five	B
YP-one hundred twenty-40	120/230	fifty/60	one hundred twenty	1600	.82	B
YP-a hundred and twenty-35	a hundred and twenty/230	50/60	95	1600	.75	B
YP-one hundred twenty-30	120/230	50/sixty	75	1300	.65	B
YP-one hundred twenty-25	120/230	50/60	60	1300	.55	B
YP-one hundred twenty-20	120/230	50/sixty	40	1300	.forty five	B

Noted :
Shaft diameter (d) can be : φ5,φ5.5,φ6,φ6.35mm or as essential.
Stator stack thickness (A) can be any kind 15mm to 50mm.
Motor enter power can be from 30W to 150W ( approx )
Thermostat or fuse are the two obtainable for over heating protection.

Mechanical dimensions

Curve chart

Trade & Market

Principal Markets:	Jap Europe South The us Western Europe North The us Southeast Asia Mid East
Whole Yearly Income Quantity:	Previously mentioned US$a hundred Million
Export Share:	71% – 80%

Manufacturing facility Details

Manufacturing facility Measurement (Sq.meters):	thirty,000-fifty,000 sq. meters
No. of Creation Traces:	Over ten
Quantity of R&D Workers:	41 – 50 People
Variety of QC Personnel:	41 – 50 Individuals
Agreement Manufacturing:	OEM Support Provided Design Services Offered Buyer Label Provided

About us

Ritscher group was established in 2006.we always target on micro-motors for home and industrial electrical equipment.At the moment, we have skilled micro-motor factories separatlly positioned in ZheJiang & ZHangZhoug province.It has fifty,000 sq. meters vegetation and a lot more than 500 employees, yearly output is 5 million pcs and has 10 million pcs annual making capacity.Right after many years improvement,we created a great reputation in the domestic and ove ept market and have the ept from our global customers.
We began our business from shaded pole motors, after ten years advancement,our items is enlarged to BLDC motors ,capacitor motors ,synchronous motors,stepping motors,servo motors, and PMDC motors.Our products are commonly employed for ma ept refrigerators, freezers, micro-wave ovens, air warmers, air exhausters, ventilators,ovens, air filter, massage machines and many other equipments.
To design the lastest technologies motors and fulfill our buyers requirments,we have the really capable R&D staff,to ensure our items top quality ,we have extremely stringent handle program for our production section & QC office,to make our price decrease,we have the extremely skilled buy division, We devote to make each specifics greater than we could do.
To offer you rapid and much better services to our customers in Australia and New Zeland,we set up department business office in Australia given that 2017 with exprienced expert to assistance the company ,which will deliver far more consumers to get know of us.
We will preserve performing our work,move ept stage by phase to make our company location broader and brighter.

Our firm FAQ for you

(1) Q: What kind motors you can give?
A:For now,we largely provide Package ept Hood Motor,DC Motor,Gear Motor,Fan Motor Fridge Motor,Hair Dryer Motor Blender Motor Mixer Motor,
Shade Pole Motor,Capacitor Motor,BLDC Motor PMDC Motor,Synchronous Motor,Stepping Motor and so on.

(2) Q: Is it achievable to visit your factory
A: Confident. But you should kindly maintain us posted a few days in advance. We need to have to verify our
schedule to see if we are obtainable then.

(3) Q: Can I get some samples
A: It relies upon. If only a couple of samples for individual use or alternative, I am frightened it will
be tough for us to offer, because all of our motors are personalized created and no stock
obtainable if there is no more wants. If just sample screening just before the official purchase and
our MOQ, price and other phrases are acceptable, we might really like to give samples.

(4) Q: Is there a MOQ for your motors?
A: Sure. The MOQ is in between 1000~ten,000pcs for various versions soon after sample approval.
But it is also all right for us to take more compact lots like a number of dozens, hundreds or thousands
For the first 3 orders soon after sample acceptance.For samples, there is no MOQ prerequisite. But the considerably less the greater (like no more than 5pcs) on problem that the quantity is enough in case any adjustments essential after original screening.

The use of authentic gear manufacturer’s (OEM) portion figures or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our organization and the shown substitute elements contained herein are not sponsored, authorized, or made by the OEM.

High price made in China - replacement parts - in Shimkent Kazakhstan Quality AC Electric Single Phase Table Pedestal Fan Motor for Stand Fan with top quality

AC Custom made in China – replacement parts – in Aurangabad India Brushless Shaded Pole Gear Electric Fan Asynchronous Engine Motor with top quality

AC Custom made in China - replacement parts - in Aurangabad India Brushless Shaded Pole Gear Electric Fan Asynchronous Engine Motor with top quality

We – EPG Team the most significant gearbox & motors , couplings and gears factory in China with 5 various branches. For much more information: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

AC Shaded Pole Motor Z6130

General Specification:

Running Temperature:-10ºC~70ºC
Motor Protection: Auto Restart or Polarity Safety
Insulation Resistance: 20MΩ or over with a DC500V Megger
Dielectric Face up to Voltage: AC500V 1s
Bearing Variety: Sleeve Bearing or Ball bearing

Model No.	Voltage (V)	Freq (Hz)	Pace (RPM)	Current (A)	Shaft Diameter (mm)	Shaft Duration (mm)	Bodyweight (g)

Z6130	90V-240V	50/60Hz	according to client demands				875

·All reading through are normal values at rated voltage.
·Parameters can be established in accordance to buyer requirements.

A lot more Versions

Kind	Design	Kind	Design
AC Shaded Pole Motor	Z4815	DC Brushless Motor	M25-20
	Z6110		M38-twenty
	Z6120		M6830
	Z6130
	Z8213
	Z8220

Applicantion

The use of unique products manufacturer’s (OEM) element quantities or logos , e.g. CASE® and John Deere® are for reference functions only and for indicating product use and compatibility. Our company and the outlined substitute elements contained herein are not sponsored, authorized, or produced by the OEM.