We We also can design and make non-standard products to fulfill customers’ particular requirements. – EPG Group the most significant agricultural gearbox and pto manufacturing facility in China with 5 various branches. For far more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
PVC PE Pipe Manufacturing System
Software:
PVC PE Pipe Manufacturing System is primarily employed in the creation of agricultural drainage, water provide and cable conduit needs. The device consists of solitary extruder equipment, mold, vacuum forming tank, multi-claw haul-off equipment, planetary(chipless/non-dust cutter) slicing machine, stacker and so on. And the line can be outfitted with Comptroller thickening instrument or laptop ink-jet printer, and many others. to obtain the manufacturing and manufacture of higher-grade tubing.
Wonderful advantages:
one. Substantial lineal extrusion pace, large capability and reduced electricity use, and accomplished multi-levels co-extrusion with 1-5 layers.
2. The copper bush is more dress in-resisting and avoid materials leakage which can ensure a stable operating of extruder.
3. Substance feed via spiral groove, efficient transmission and can successfully lessen back again-strain on extruder.
4. Distinctive design (barrier, shearing and mixing zone) ensures a uniformed plasticizing result, and can decrease the pressure on the screw which assures a high speed and stable output capacity.
5. Large torque equipment box has a smart figuration, compact design, lower sound, substantial carrying potential, higher transmission performance can assure extended-time difficulty-free of charge procedure
6. PCA(pipe air cooling system) of die head largely enhance the extrusion velocity and decrease the cooling duration of extrusion line, and boost quality of interior pipe surface area
7. Smart PLC managing method with human-helpful interface make the procedure effortlessly and conveniently
eight. Chip-cost-free cutter ensuing flat and easy cutting surface area of pipe.
Perform movement and detailed info :
Feeder | • To feed materials into extruder |
Extruder | • ept renowned brand electrical element such as Siemens,Schneider, ABB and so forth • High torque gearbox with adopts NSK/SKF bearing • Siemens/WEG original motor accomplished global right after services • Bimetallic screw and barrel • Intelligent PLC controlling system with human-pleasant interface. |
Die head | • 40Cr material • Complete set consist of extrusion die head, Slotting & water ring sort calibration sleeve • Utilize to PE/PP, co-extrusion, multi-layers co-extrusion and so on |
Vacuum calibration tank | • Include full established of vacuum and drinking water pump • duration from 6m-9m |
Haul off | • Upper and reduced caterpillar is pushed individually by the frequency inverter • Rapidly adjust variety pads |
Cutter | • Trac ept cutter or Non-dust cutter, Blade rotates around pipe and reduce off pipe with sleek floor. • Synchronous management |
Stacker | • Stainless metal 304 as touching materials • Discharge driving by air cylinder |
Complex Parameter:
Diameter selection(mm) | Extruder design | Max. Potential(kg/h) | Max. lineal pace(m/min) | Extruder electrical power(KW) |
Ф20-sixty three | ASS65/33 | 220 | 12 | fifty five |
Ф20-sixty three | ASE60/38 | 460 | thirty | one hundred ten |
Ф20-63 Twin | ASE60/38 | 460 | 15×2 | one hundred ten |
Ф20-one hundred ten | ASS65/33 | 220 | 12 | fifty five |
Ф20-one hundred ten | ASE60/38 | 460 | 30 | one hundred ten |
Ф20-160 | ASE60/38 | 460 | 15 | 110 |
Ф50-250 | ASE75/38 | 600 | twelve | one hundred sixty |
Ф110-450 | ASE90/38 | 850 | 8 | 250 |
Ф250-630 | ASE90/38 | 1,050 | 4 | 280 |
Ф500-800 | ASE one hundred twenty/38 | 1,three hundred | 2 | 315 |
Ф710-1200 | ASE120/38 | one,450 | 1 | 355 |
Ф1000-1600 | ASE90/38 ASE90/38 |
one,900 | .6 | 280 280 |
Primary components:
– bush hog gearbox seals Calamba Philippines Motor: Siemens, WEG, SEW
– Gear reducer: SEW, FALK
– Bearing: SKF, FAG, NSK
– Air cylinder: Festo, SMC, AirTac
– PLC interface and module: Siemens, Schneider, Beckhoff
– Frequency inverter: ABB, Schneider, Siemens
– Servo motor: Lenze, Delta
– Pressure sensor: Dynisco, Gefran
– Lower voltage part: Siemens, Schneider, Omron, LS
– Temperature controller: Omron, RKC
– Strong point out relay: Crydom, Celduc
Principal Extruder 3D specifics:
A, Prolonged groove between feed throat and screw to enhance output very
B. Accurate temperature control program on feed area to match various plastics
C. Special screw design to obtain higher plasticizing and products quality
D. Gearbox of high torsion equilibrium to understand secure working
E. H shape body to decrease vibrating
F. PLC (Simatic Multi Panel) operation panel to guarantee synchronization
G. Strength conservation, simple to routine maintenance
Services and assistance:
*Just before-sale:
Introduce items professional
Project engineering
*For the duration of producing:
Provide structure and engineering situations
Inform the plan of manufacturing
Make confident the item created in accordance with complex doc
Take a look at machine just before delivery
Supply photos before delivery
*Following-sale:
Create buyers databases. All equipment are traceable.
Overseas installation, commissioning and education are accessible
Speed up services and spare parts source.
Check out customers and make top quality trace periodically
Our Effective Subject matter:
Get in touch with to KITECH:
KITECH Machinery CO., LTD
Site:
Insert:No.7 Xihu (West Lake) Dis. Business Park, ept Town, HangZhou Metropolis ZheJiang , China.
The use of unique gear manufacturer’s (OEM) element quantities or emblems , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement components contained herein are not sponsored, accepted, or created by the OEM.