Substantial Power 24 Volt 120W Body 90mm DC gear Motor for Solar Panel Thoroughly clean
Merchandise Description:
Equipment Motor-Torque Table Allowance Torque Unit:Upside (N.m)/Belowside (kgf.cm)
•Gearhead and Intermediate gearhead are sold independently.
•Enter the reduction ratio into the blank() in the model name.
•The speed is calculated by dividing the motor’s synchronous pace by the reduction ratio. The true velocity is 2%~20% much less than the shown value, dependent on the size of the load.
•To minimize the speed beyond the reduction ratio in the subsequent table, attach an intermediate gearhead (reduction ratio: ten) in between the reducer and motor. In that circumstance, the permissible torque is 20N.m.
Type Motor/Gearhead |
Equipment Ratio |
three |
3.6 |
five |
six |
seven.5 |
nine |
twelve.5 |
15 |
eighteen |
25 |
thirty |
36 |
fifty |
60 |
75 |
ninety |
a hundred |
120 |
150 |
180 |
Pace r/min |
866 |
722 |
520 |
433 |
346 |
288 |
208 |
173 |
a hundred and forty four |
104 |
86 |
72 |
52 |
forty three |
34 |
28 |
26 |
21 |
17 |
fourteen |
|
Z5D120-24GU-M(5GU180KB) |
5GU()RC/ 5GU()RT |
.87 |
1.04 |
1.forty five |
1.74 |
2.41 |
5.44 |
4.02 |
four.eighty two |
five.seventy eight |
eight.03 |
9.64 |
10.4 |
14.five |
seventeen.4 |
20. |
20. |
twenty. |
twenty. |
20. |
20. |
eight.87 |
ten.six |
fourteen.8 |
seventeen.seven |
24.6 |
55.five |
forty one. |
48.2 |
59. |
eighty one.nine |
ninety eight.3 |
106 |
148 |
177 |
two hundred |
200 |
two hundred |
200 |
200 |
two hundred |
Dimensions(Device:mm):
Firm Details
FAQ
Q: What’re your principal items?
A: We presently produce Brushed Dc Motors, Brushed Dc Gear Motors, Planetary Dc Gear Motors, Brushless Dc Motors, Stepper motors, Ac Motors and Substantial Precision Planetary Equipment Box etc. You can check the technical specs for earlier mentioned motors on our web site and you can email us to advocate required motors for each your specification as well.
Q: How to choose a appropriate motor?
A:If you have motor photographs or drawings to demonstrate us, or you have comprehensive specs like voltage, pace, torque, motor measurement, functioning mode of the motor, needed lifetime and sounds amount and many others, please do not hesitate to enable us know, then we can recommend suited motor for every your ask for accordingly.
Q: Do you have a CZPT provider for your standard motors?
A: Of course, we can customise for every your request for the voltage, velocity, torque and shaft size/condition. If you require extra wires/cables soldered on the terminal or need to incorporate connectors, or capacitors or EMC we can make it also.
Q: Do you have an specific layout provider for motors?
A: Indeed, we would like to style motors separately for our consumers, but it might need to have some mould building value and design cost.
Q: What is your guide time?
A: CZPTly speaking, our normal regular product will need fifteen-30days, a little bit for a longer time for CZPT items. But we are quite adaptable on the guide time, it will rely on the particular orders.
Remember to make contact with us if you have detailed requests, thank you ()