JK42BLS01 26W 24V 4000RPM 42mm Brushless Dc Motor
Solution Description:
CZPTal Specification: | |||||
Product | |||||
Specification | Unit | JK42BLS01 | JK42BLS02 | JK42BLS03 | JK42BLS04 |
Number Of Phase | Phase | 3 | |||
Number Of Poles | Poles | 8 | |||
Rated Voltage | VDC | 24 | |||
Rated Speed | Rpm | 4000 | |||
Rated Torque | N.m | .0625 | .one hundred twenty five | .185 | .25 |
Rated Current | Amps | 1.eight | 3.3 | 4.eight | 6.three |
Rated Power | W | 26 | fifty two.5 | 77.five | a hundred and five |
Peak Torque | N.m | .19 | .38 | .fifty six | .seventy five |
Peak Current | Amps | five.four | 10.6 | 15.five | twenty |
Back E.M.F | V/Krpm | four.one | 4.2 | four.three | 4.three |
Torque Constant | N.m/A | .039 | .04 | .041 | .041 |
Rotor Inertia | g.cm^2 | 24 | 48 | seventy two | 96 |
Body Length | mm | 41 | 61 | eighty one | one hundred |
Weight | Kg | .3 | .forty five | .sixty five | .8 |
Sensor | Honeywell | ||||
Insulation Class | B | ||||
Degree of Protection | IP30 | ||||
Storage Temperature | -twenty five~+70ºC | ||||
Operating Temperature | -fifteen~+50ºC | ||||
Working Humidity | eighty five% or under 85% RH(non condensing) | ||||
Working Environment | out of doors(no direct sunlight),Non-corrosive Gas, Non-inflammable gas, No oil fog, No dust |
||||
Altitude | 1000m or under 1000m |
CZPT Specification | |
Item | Specification |
Winding type | Delta |
Hall effect angle | 120 degree electrical angle |
Shaft run out | .571mm |
Radial play | .02mm@450g |
End play | .08mm@450g |
Max.radial force | 28N @20mm form the flange |
Max.axial force | 10N |
Insulation class | Class B |
Dielectric strength | 500VDC for one minute |
Insulation resistance | 100MΩ Min.,500VDC |
Our exhibition :
Items of special ask for can be made according to the consumer request !
Organization information:
Our certification:
Our Organization gives a few major collection of items:Hybrid Stepper motors, Brushless Dc motor and Dc Brush motor.
We are always carries on develop new variety models.If you need to have other varieties of parts, please don’t be reluctant to get in touch with us.