150W GU Type 90 Collection Of Brushless DC Gear Motor
Basic Characteristics Of Motor
•150W (DC Electrical power Offer When Utilized To 24VDC/36VDC/48VDC)
Rated electricity (Ongoing) |
W |
one hundred twenty (60W/90W/120W) |
|||
Rated speed |
r/min |
2500 |
|||
Rated torque |
N.m |
.458 |
|||
Instantaneous maximum torque |
N.m |
.687 |
|||
Rotor second of inertia |
J:X10-fourkg.mtwo |
.250 |
|||
Speed manage assortment |
RPM |
Substantial pressure two hundred-2500RPM (Lower pressure 200-3000RPM) |
|||
Pace control selection |
On load |
Under ± one %: problem ~rated torque, rated velocity, rated voltage, area temperature |
|||
On voltage |
Below±1%: issue rated voltage ±10%, rated velocity, rated load, area temperature |
||||
On temperature |
elow±1%: Problems of ambient temperature ~+40°C rated voltage, rated load and rated pace |
||||
Electricity enter |
Rated voltage |
V |
Solitary section 110V |
One stage 220V | 24VDC(Optiond 36VDC/48VDC) |
Voltage tolerance assortment |
±10% |
||||
Frequency |
Hz |
50/60 |
/ |
||
Frequency tolerance variety |
±5% |
/ |
|||
Rated enter present |
A |
3.5 |
2. |
six.eight |
|
Instantaneous highest enter recent |
A |
7. |
4.five |
13. |
Solution Description
Circular Shaft Type Optical Motor
•Z5BLD150-24GUL-30S(5GU40LC)-Voltage 24/36/forty eight/one hundred ten/220
•Z5BLD150-24GUL-30S(5GU40LC) Diagram (ZD CZPT Generate)
•Reduced Voltage Wrie Plughole Corresp-onding Signal Rationalization
plughole |
1 |
2 |
3 |
4 |
signal |
U |
W |
Hv |
Hu |
plughole |
5 |
6 |
7 |
eight |
signal |
V |
GND |
Hw |
Vcc |
•High Voltage Wrie Plughole Corresp-onding Signal Explanation
Corresponding which means | |||||||||
one |
2 |
three |
four |
5 |
six |
seven |
8 |
9 |
10 |
Blue (coarse) |
Yellow (fantastic) |
Yellow (coarse) |
Inexperienced (fine) |
Inexperienced (coarse) |
Blue (fine) |
|
Steel mesh |
Red (fine) |
Black (good) |
W |
Hu |
U |
Hv |
V |
Hw |
|
|
Vcc+5V |
GND |
•Parallel Shaft Speed Reducer
Z5BLD150-24GUL-30S(5GU40LC)-Voltage 24/36/forty eight/one hundred ten/220 ()-Velocity Ratio Worth
1.Connector:5557-8R/10R(MOLEX) two.The sheath length of guide line 300mm 3.Round terminal:SRA-21T-four
•Decimal Gearhead
5GN()XK-Velocity Ratio Value, CZPTly ten
Gearhead Model |
Equipment Ratio |
L Dimension |
5GU()K |
three-200 |
sixty five.five |
•Enter the equipment ratio in the box () inside the product title
•Z5BLD150-24GUL-30S(5GU40LC) Machine Allowable Torque (Device: N.m)
Design
|
MotorSpeed/Reduction Ratio |
3 |
3.six |
five |
six |
seven.five |
nine |
10 |
twelve.five |
15 |
18 |
twenty |
25 |
thirty |
36 |
50 |
60 |
75 |
ninety |
100 |
one hundred twenty |
150 |
180 |
200 |
200-1500RPM |
1.forty five |
one.seventy four |
2.forty one |
two.ninety |
three.62 |
four.34 |
four.35 |
5.forty four |
six.fifty three |
seven.eighty three |
seven.87 |
nine.eighty three |
eleven.8 |
fourteen.2 |
19.7 |
twenty. |
twenty. |
twenty. |
twenty. |
twenty. |
20. |
twenty. |
twenty. |
|
Z5BLD150-()GU
|
2000RPM |
one.39 |
one.67 |
two.32 |
2.seventy eight |
three.48 |
four.eighteen |
4.eighteen |
5.23 |
six.27 |
7.fifty three |
7.56 |
9.forty five |
eleven.three |
13.six |
eighteen.9 |
20. |
twenty. |
20. |
twenty. |
20. |
20. |
20. |
20. |
2500RPM |
1.11 |
one.34 |
1.86 |
two.23 |
2.78 |
three.34 |
3.35 |
4.18 |
5.02 |
six.02 |
6.05 |
seven.fifty six |
9.08 |
10.9 |
15.1 |
18.2 |
20. |
20. |
twenty. |
twenty. |
twenty. |
twenty. |
20. |
Notice :The() (gray) in the desk signifies that the rotation route is constant with the motor.(The torque under various speed and velocity ratio is acquired below the ZD standard.)
•L Kind Speed Reducer
•Z5BLD150-24GUL-30S(5GU40LC) Device Allowable Torque (Device: N.m)
MotorSpeed/Reduction Ratio |
five |
ten |
fifteen |
20 |
thirty |
50 |
a hundred |
two hundred |
200~1500RPM |
2.41 |
four.eighty three |
7.24 |
nine.sixty five |
thirteen.one |
21.eight |
43.5 |
68. |
2000RPM |
two.04 |
4.08 |
six.thirteen |
8.17 |
11. |
18.four |
36.eight |
sixty six.6 |
2500RPM |
one.sixty seven |
three.35 |
5.02 |
six.69 |
ten. |
16.seven |
33.5 |
60.5 |
•Arc Cone Right Angle Pace Reducer Motor
Z5BLD150-()GU-30S/5GUEIRC ()-Voltage 24/36/forty eight/110/220 ()-Velocity Ratio Value
Z5BLD150-()GU-30S/5GUORT ()-Voltage 24/36/forty eight/a hundred and ten/220 ()-Velocity Ratio Worth
one.The sheath duration of lead line 300mm two.Connector: 5557-8R/10R (MOLEX) 3.Spherical terminal: SRA-21T-4 (Minimal floor)
• Z5BLD150-()GU-30S/5GU()RC/RT Device Allowable Torque (Device: N.m)
Design |
MotorSpeed/Reduction Ratio |
seven.five |
9 |
ten |
12.5 |
15 |
eighteen |
20 |
twenty five |
thirty |
36 |
50 |
60 |
seventy five |
90 |
a hundred |
a hundred and twenty |
150 |
a hundred and eighty |
200 ~1500RPM |
3.62 |
four.34 |
four.35 |
five.44 |
six.53 |
seven.eighty three |
seven.87 |
9.83 |
eleven.eight |
14.2 |
19.7 |
20. |
twenty. |
20. |
20. |
20. |
20. |
twenty. |
|
Z5BLD150-()GU |
2000RPM |
3.fourteen |
3.seventy six |
four.18 |
five.23 |
six.27 |
7.fifty two |
8.36 |
ten.five |
12.5 |
13.6 |
18.nine |
20. |
20. |
twenty. |
20. |
20. |
twenty. |
twenty. |
2500RPM |
two.50 |
3.01 |
three.35 |
4.eighteen |
5.02 |
6.02 |
6.sixty nine |
eight.37 |
10. |
ten.nine |
15.one |
eighteen.two |
20. |
twenty. |
20. |
twenty. |
twenty. |
twenty. |
Note :The (gray) in the desk signifies that the rotation direction is constant with the motor.(The torque underneath different pace and velocity ratio is acquired beneath the ZD common.)
Firm Data
FAQ
Q: What’re your principal goods?
A: We at the moment generate Brushed Dc Motors, Brushed Dc Equipment Motors, Planetary Dc Equipment Motors, Brushless Dc Motors, Stepper motors, Ac Motors and Higher Precision Planetary Gear Box and so forth. You can check out the requirements for earlier mentioned motors on our website and you can e mail us to advocate needed motors per your specification as well.
Q: How to choose a suitable motor?
A:If you have motor photographs or drawings to demonstrate us, or you have detailed specs like voltage, speed, torque, motor dimension, functioning method of the motor, needed life time and sound degree etc, please do not be reluctant to enable us know, then we can advocate suitable motor per your request accordingly.
Q: Do you have a CZPT support for your standard motors?
A: Of course, we can personalize for every your request for the voltage, pace, torque and shaft dimensions/form. If you require additional wires/cables soldered on the terminal or want to incorporate connectors, or capacitors or EMC we can make it also.
Q: Do you have an individual design support for motors?
A: Of course, we would like to design motors individually for our clients, but it could need to have some mildew establishing cost and layout demand.
Q: What is actually your guide time?
A: CZPTly talking, our standard normal merchandise will need 15-30days, a bit for a longer time for CZPT items. But we are quite versatile on the lead time, it will rely on the specific orders.
Remember to get in touch with us if you have detailed requests, thank you