Tag Archives: stepper motor gearbox

China High Efficiency Hybrid Stepper Motor with Planetary Gearbox – NEMA 2.3″ – 56 mm Square with Good quality

Merchandise Description

Motor Specialized Specification

Flange

NEMA 2.3″ – 56 mm square

Bipolar holding torque

200.00 [Ncm] min.

Phase angle

one.8 [°] ± 5 [%]

Passi giro

200

Rated voltage

.50 [Volt]

Rated existing

four.20 [A/ph]

Period resistance

15 [Ohm] ± ten [%]

Phase inductance

twenty [mH] ± 20 [%]

Rotor inertia

480 [g.cm²]

Wires variety

four wires for bipolar relationship

Wires output

Direct wires output

Ambient temperature

-twenty [°C] ~ +40 [°C]

Temperature rise

80 [K]

Humidity

15 [%] ~ ninety [%]

Insulation resistance

100 [Mohm] min.

Dielectric energy

five hundred [VAC 1 Minute]

Insulation class

Class B, 130°

Course defense

IP30

Max. shaft radial load

seventy five [N]

Max. shaft axial load

fifteen [N]

Depth

77.thirty [mm]

Shaft

Double shaft

Dimensions H x L x W

56.4 [mm] x 56.4 [mm] x 147.3 [mm]

Bodyweight

two.1 [Kg.]

Gearbox kind

Planetary

Lubrication

grease (everlasting lubrification)

Stacks amount

2

Gearbox reduction ratio

one : 30

Max output torque

60. [Nm]

Operational temperature

-thirty [°C] ~ +40 [°C]

Fat

.7 [Kg.]

Company Profile

Taking advantage of the proactive weather of the 70s, in 1977 the engineer Felice Caldi, who experienced often been a passionate builder and inventor, founded an innovative business, running internationally in the subject of computer software for industrial machinery.
Since then, this tiny firm dependent in Lodi has enjoyed continuous successes associated to revolutionary merchandise and chopping edge “greatest in course” technologies in the discipline of industrial automation, as verified by the many patents filed for the duration of the many years as properly as the important awards offered to it by the Chamber of Commerce of Milan and of the Lombardy Region.
    The firm, thanks to its successes in excess of time, has developed significantly, increasing its sales network abroad and opening another business in China to control the sales stream in the Asian industry. 
    At any time attentive to the dynamics and requirements of the automation market place, constantly evolving and continually searching for technological innovation, At any time Elettronica has been CZPT to reply to all the technological difficulties that have arisen over the many years, delivering solutions CZPT to make its customer’s devices a lot more and far more doing and hugely competitive.
    And it is specifically to underline the value and the uniqueness of every solitary client that we design, with care and commitment, extremely customised automation remedies, that are CZPT to properly meet any ask for, the two concerning software program and components.
    Our staff of mechatronic engineers can indeed customise the application with specially made firmware, and it can also adapt the motor by customising, for example, the length of the cables or the diameter of the crankshaft and the IP protection degree, all strictly dependent on the customer’s specialized specs.

US $50-120
/ Piece
|
1 Piece

(Min. Order)

###

Application: Laser Cutting and Scanner
Speed: Low Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Driving
Number of Poles: 2

###

Customization:

###

Flange
NEMA 2.3" – 56 mm square
Bipolar holding torque
200.00 [Ncm] min.
Step angle
1.8 [°] ± 5 [%]
Passi giro
200
Rated voltage
0.50 [Volt]
Rated current
4.20 [A/ph]
Phase resistance
15 [Ohm] ± 10 [%]
Phase inductance
20 [mH] ± 20 [%]
Rotor inertia
480 [g.cm²]
Wires number
4 wires for bipolar connection
Wires output
Lead wires output
Ambient temperature
-20 [°C] ~ +40 [°C]
Temperature rise
80 [K]
Humidity
15 [%] ~ 90 [%]
Insulation resistance
100 [Mohm] min.
Dielectric strength
500 [VAC 1 Minute]
Insulation class
Class B, 130°
Class protection
IP30
Max. shaft radial load
75 [N]
Max. shaft axial load
15 [N]
Depth
77.30 [mm]
Shaft
Double shaft
Dimensions H x L x W
56.4 [mm] x 56.4 [mm] x 147.3 [mm]
Weight
2.1 [Kg.]
Gearbox type
Planetary
Lubrication
grease (permanent lubrification)
Stacks number
2
Gearbox reduction ratio
1 : 30
Max output torque
60.0 [Nm]
Operational temperature
-30 [°C] ~ +40 [°C]
Weight
0.7 [Kg.]
US $50-120
/ Piece
|
1 Piece

(Min. Order)

###

Application: Laser Cutting and Scanner
Speed: Low Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Driving
Number of Poles: 2

###

Customization:

###

Flange
NEMA 2.3" – 56 mm square
Bipolar holding torque
200.00 [Ncm] min.
Step angle
1.8 [°] ± 5 [%]
Passi giro
200
Rated voltage
0.50 [Volt]
Rated current
4.20 [A/ph]
Phase resistance
15 [Ohm] ± 10 [%]
Phase inductance
20 [mH] ± 20 [%]
Rotor inertia
480 [g.cm²]
Wires number
4 wires for bipolar connection
Wires output
Lead wires output
Ambient temperature
-20 [°C] ~ +40 [°C]
Temperature rise
80 [K]
Humidity
15 [%] ~ 90 [%]
Insulation resistance
100 [Mohm] min.
Dielectric strength
500 [VAC 1 Minute]
Insulation class
Class B, 130°
Class protection
IP30
Max. shaft radial load
75 [N]
Max. shaft axial load
15 [N]
Depth
77.30 [mm]
Shaft
Double shaft
Dimensions H x L x W
56.4 [mm] x 56.4 [mm] x 147.3 [mm]
Weight
2.1 [Kg.]
Gearbox type
Planetary
Lubrication
grease (permanent lubrification)
Stacks number
2
Gearbox reduction ratio
1 : 30
Max output torque
60.0 [Nm]
Operational temperature
-30 [°C] ~ +40 [°C]
Weight
0.7 [Kg.]

How to Select a Gear Motor

A gearmotor is an electrical machine that transfers energy from one place to another. There are many types of gearmotors. This article will discuss the types of gearmotors, including Angular geared motors, Planetary gearboxes, Hydraulic gear motors, and Croise motors. In addition to its uses, gearmotors have many different characteristics. In addition, each type has distinct advantages and disadvantages. Listed below are a few tips on selecting a gearmotor.

Angular geared motors

Angular geared motors are the optimum drive element for applications where torques, forces, and motions need to be transferred at an angle. Compared to other types of geared motors, these have few moving parts, a compact design, and a long life. Angular geared motors are also highly efficient in travel drive applications. In addition to their durability, they have a low maintenance requirement and are highly corrosion-resistant.
Helical worm geared motors are a low-cost solution for drives that employ angular geared motors. They combine a worm gear stage and helical input stage to offer higher efficiency than pure worm geared motors. This drive solution is highly reliable and noise-free. Angular geared motors are often used in applications where noise is an issue, and helical worm geared motors are particularly quiet.
The gear ratio of an angular geared motor depends on the ratio between its input and output shaft. A high-quality helical geared motor has a relatively low mechanical noise level, and can be installed in almost any space. The torque of a helical geared motor can be measured by using frequency measurement equipment. The energy efficiency of angular geared motors is one of the most important factors when choosing a motor. Its symmetrical arrangement also allows it to operate in low-speed environments.
When selecting the right angular geared motor, it is important to keep in mind that increased torque will lead to poor output performance. Once a gear motor reaches its stall torque, it will no longer function properly. This makes it important to consult a performance curve to choose the appropriate motor. Most DC motor manufacturers are more than happy to provide these to customers upon request. Angular geared motors are more expensive than conventional worm gear motors.
Motor

Planetary gearboxes

Planetary gearboxes are used in industrial machinery to generate higher torque and power density. There are three main types of planetary gearboxes: double stage, triple stage, and multistage. The central sun gear transfers torque to a group of planetary gears, while the outer ring and spindle provide drive to the motor. The design of planetary gearboxes delivers up to 97% of the power input.
The compact size of planetary gears results in excellent heat dissipation. In some applications, lubrication is necessary to improve durability. Nevertheless, if you are looking for high speed transmission, you should consider the additional features, such as low noise, corrosion resistance, and construction. Some constructors are better than others. Some are quick to respond, while others are unable to ship their products in a timely fashion.
The main benefit of a planetary gearbox is its compact design. Its lightweight design makes it easy to install, and the efficiency of planetary gearboxes is up to 0.98%. Another benefit of planetary gearboxes is their high torque capacity. These gearboxes are also able to work in applications with limited space. Most modern automatic transmissions in the automotive industry use planetary gears.
In addition to being low in cost, planetary gearboxes are a great choice for many applications. Neugart offers both compact and right angle versions. The right angle design offers a high power-to-weight ratio, making it ideal for applications where torque is needed to be transmitted in reverse mode. So if you’re looking for an efficient way to move heavy machinery around, planetary gearboxes can be a great choice.
Another advantage of planetary gearboxes is their ability to be easily and rapidly changed from one application to another. Since planetary gears are designed to be flexible, you don’t have to buy new ones if you need to change gear ratios. You can also use planetary gears in different industries and save on safety stock by sharing common parts. These gears are able to withstand high shock loads and demanding conditions.
Motor

Hydraulic gear motors

Hydraulic gear motors are driven by oil that is pumped into a gear box and causes the gears to rotate. This method of energy production is quiet and inexpensive. The main drawbacks of hydraulic gear motors are that they are noisy and inefficient at low speeds. The other two types of hydraulic motors are piston and vane-type hydraulic motors. The following are some common benefits of hydraulic gear motors.
A hydraulic gear motor is composed of two gears – a driven gear and an idler. The driven gear is attached to the output shaft via a key. High-pressure oil flows into the housing between the gear tips and the motor housing, and the oil then exits through an outlet port. Unlike a conventional gear motor, the gears mesh to prevent the oil from flowing backward. As a result, they are an excellent choice for agricultural and industrial applications.
The most common hydraulic gear motors feature a gerotor and a drive gear. These gears mesh with a larger gear to produce rotation. There are also three basic variations of gear motors: roller-gerotor, gerotor, and differential. The latter produces higher torque and less friction than the previous two. These differences make it difficult to choose which type is the best for your needs. A high-performance gear motor will last longer than an ordinary one.
Radial piston hydraulic motors operate in the opposite direction to the reciprocating shaft of an electric gearmotor. They have nine pistons arranged around a common center line. Fluid pressure causes the pistons to reciprocate, and when they are stationary, the pistons push the fluid out and move back in. Because of the high pressure created by the fluid, they can rotate at speeds up to 25,000RPM. In addition, hydraulic gear motors are highly efficient, allowing them to be used in a wide range of industrial and commercial applications.
Hydraulic gear motors complement hydraulic pumps and motors. They are also available in reversible models. To choose the right hydraulic motor for your project, take time to gather all the necessary information about the installation process. Some types require specialized expertise or complicated installation. Also, there are some differences between closed and open-loop hydraulic motors. Make sure to discuss the options with a professional before you make a decision.
Motor

Croise motors

There are many advantages to choosing a Croise gear motor. It is highly compact, with less weight and space than standard motors. Its right-angle shaft and worm gear provide smooth, quiet operation. A silent-type brake ensures no metallic sound during operation. It also offers excellent positioning accuracy and shock resistance. This is why this motor is ideal for high-frequency applications. Let’s take a closer look.
A properly matched gearmotor will provide maximum torque output in a specified period. Its maximum developing torque is typically the rated output torque. A one-twelfth-horsepower (1/8 horsepower) motor can meet torque requirements of six inch-pounds, without exceeding its breakdown rating. This lower-cost unit allows for production variations and allows the customer to use a less powerful motor. Croise gear motors are available in a variety of styles.

China High Efficiency Hybrid Stepper Motor with Planetary Gearbox - NEMA 2.3China High Efficiency Hybrid Stepper Motor with Planetary Gearbox - NEMA 2.3
editor by czh 2023-01-16

China Hot Sale High Quality Electric NEMA 34 Easy Servo Stepper Motor with Planetary Gearbox with Hot selling

Item Description

Solution Description

Stepper Motor Description

This waterproof bipolar Nema 3.4″ 86 mm sq. stepper motor is configured with stage angle 1.8° with a measurement of 86 mm x 86 mm x 152.5 mm. It has 4 wires for bipolar link with an IP65 connector and every single period draws present twelve.00 A at 3.00 V, with bipolar holding torque 1180.00 [Ncm] min.

The IP65 rated Ever Elettronica hybrid stepper motors are created to supply dust proof operation and face up to low strain jets of h2o. The IP65 rated stepper motors are ideal for washing machines, health care and laboratory equipments and in the packaging applications because they are appropriate for washdown methods. The high performance waterproof hybrid 2 phase stepper motor is also best to management CZPT pumps of distinct measurements.

 

Solution Parameters

Motor Specialized Specification

Flange

NEMA 34

Step angle

1.8 [°] ± 5 [%]

  Keeping torque   8.2 N.m MIN

Section resistance

.fifty four [Ohm] ± ten [%]

Phase inductance

5.0 [mH] ± twenty [%]

Rotor inertia

3800 [g.cm²]

Ambient temperature

-twenty [°C] ~ +fifty [°C]

Temperature rise

80 [K]

Dielectric power

five hundred [VAC 1 Moment]

Class security

IP20

Max. shaft radial load

220 [N]

Max. shaft axial load

60 [N]

Fat

4000 [g.]

Mechanical Drawing (in mm)

 

Nema Model Length Step Angle Current/Section Resistance/Phase Inductance/Period Holding Torque # of Prospects Rotor Inertia
(L)mm ( °) A Ω mH N.M. No. g.cm2
Open LOOP Step MOTOR
Nema8 EW08-210H 37.eight one.80  1.00  four.30  one.70  .04min four.00  two.90 
Nema11 EW11-one hundred ten 30.1 1.80  one.00  4.50  3.80  .08min 4.00  5.00 
EW11-110H thirty.1 1.80  one.00  4.50  4.00  .07min 4.00  nine.00 
EW11-310 50.4 1.80  1.00  2.50  two.20  .14min four.00  20.00 
EW11-310D fifty.four one.80  1.00  two.50  two.20  .14min four.00  20.00 
Nema14 EW14-110 twenty five.5 one.80  1.00  3.30  3.80  .17min four.00  twenty five.00 
EW14-210 forty.five 1.80  1.00  4.00  six.10  .2min four.00  25.00 
Nema17 EW17-220 33.seven 1.80  2.00  .70  1.40  .3min 4.00  40.00 
EW17-320 39.2 1.80  2.00  one.00  1.80  .45min four.00  60.00 
EW17-320D 39.two one.80  two.00  one.00  one.80  .45min 4.00  60.00 
EW17-420 forty seven.2 one.80  two.00  one.00  2.00  .56min 4.00  80.00 
EW17-420D 47.two one.80  2.00  one.00  two.00  .56min four.00  eighty.00 
EW17-420M eighty.one 1.80  2.00  one.35  3.20  .48min four.00  77.00 
EW17-520 sixty one.80  two.00  1.35  2.90  .70min 4.00  a hundred and fifteen.00 
EW17-520M ninety nine.1 1.80  two.00  1.77  4.00  .72min 4.00  a hundred and ten.00 
Nema23 EW23-one hundred forty 41.9 1.80  4.00  .37  1.00  .70min 4.00  170.00 
EW23-240 fifty two.nine one.80  4.00  .45  1.70  1.25min 4.00  290.00 
EW23-240D 52.9 1.80  4.00  .45  1.70  1.25min four.00  290.00 
EW23-240M ninety five.5 one.80  four.00  .44  1.40  1.20min 4.00  480.00 
EW23-340 seventy six.4 1.80  four.00  .50  1.80  two.00min 4.00  520.00 
EW23-340D 76.four one.80  4.00  .50  1.80  two.00min four.00  520.00 
EW23-350M 116.five one.80  5.00  .40  one.80  2.00min four.00  480.00 
Nema24 EW24-240 54.five one.80  four.00  .45  one.20  1.40min 4.00  450.00 
EW24-440 85.five 1.80  four.00  .80  three.00  3.00min 4.00  900.00 
EW24-450M a hundred twenty five.six one.80  5.00  .42  1.80  3.00min four.00  900.00 
Nema34 EW34-260 79.five one.80  6.00  .38  two.80  four.5min four.00  1900.00 
EW34-360 99 1.80  6.00  .47  3.90  6.00min four.00  2700.00 
EW34-460M 155.three 1.80  six.00  .54  five.00  eight.20min four.00  3800.00 
EW34-560 129 one.80  six.00  .64  six.00  9.00min 4.00  4000.00 
EW34-660 159.five 1.80  6.00  .72  7.30  12min. four.00  5000.00 
EH34-530 129 1.80  three.60  one.06  10.00  7.1min 4.00  4000.00 

Organization Profile

     Getting benefit of the proactive local weather of the 70s, in 1977 the engineer Felice Caldi, who had always been a passionate builder and inventor, started an modern firm, working internationally in the discipline of software program for industrial equipment.
Since then, this little company primarily based in Lodi has appreciated ongoing successes associated to revolutionary items and reducing edge “ideal in class” technologies in the discipline of industrial automation, as confirmed by the many patents submitted during the a long time as nicely as the crucial awards presented to it by the Chamber of Commerce of Milan and of the Lombardy Area.
    The company, many thanks to its successes above time, has grown significantly, expanding its product sales network abroad and opening an additional business in China to handle the revenue stream in the Asian marketplace. 
    At any time attentive to the dynamics and demands of the automation marketplace, continuously evolving and continually searching for technological innovation, At any time Elettronica has been CZPT to reply to all the technological difficulties that have arisen over the several years, providing remedies CZPT to make its customer’s equipment much more and far more performing and highly aggressive.
    And it is precisely to underline the importance and the uniqueness of every solitary client that we layout, with care and commitment, very customised automation remedies, that are CZPT to completely satisfy any request, both with regards to computer software and hardware.
    Our team of mechatronic engineers can certainly customise the computer software with specifically designed firmware, and it can also adapt the motor by customising, for case in point, the size of the cables or the diameter of the crankshaft and the IP defense degree, all strictly based on the customer’s specialized technical specs.

US $20-120
/ Piece
|
1 Piece

(Min. Order)

###

Application: Medical and Laboratory Equipment
Speed: Low Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Driving
Number of Poles: 2

###

Customization:

###

Flange
NEMA 34
Step angle
1.8 [°] ± 5 [%]
  Holding torque   8.2 N.m MIN
Phase resistance
0.54 [Ohm] ± 10 [%]
Phase inductance
5.0 [mH] ± 20 [%]
Rotor inertia
3800 [g.cm²]
Ambient temperature
-20 [°C] ~ +50 [°C]
Temperature rise
80 [K]
Dielectric strength
500 [VAC 1 Minute]
Class protection
IP20
Max. shaft radial load
220 [N]
Max. shaft axial load
60 [N]
Weight
4000 [g.]

###

Nema Model Length Step Angle Current/Phase Resistance/Phase Inductance/Phase Holding Torque # of Leads Rotor Inertia
(L)mm ( °) A Ω mH N.M. No. g.cm2
OPEN LOOP STEP MOTOR
Nema8 EW08-210H 37.8 1.80  1.00  4.30  1.70  0.04min 4.00  2.90 
Nema11 EW11-110 30.1 1.80  1.00  4.50  3.80  0.08min 4.00  5.00 
EW11-110H 30.1 1.80  1.00  4.50  4.00  0.07min 4.00  9.00 
EW11-310 50.4 1.80  1.00  2.50  2.20  0.14min 4.00  20.00 
EW11-310D 50.4 1.80  1.00  2.50  2.20  0.14min 4.00  20.00 
Nema14 EW14-110 25.5 1.80  1.00  3.30  3.80  0.17min 4.00  25.00 
EW14-210 40.5 1.80  1.00  4.00  6.10  0.2min 4.00  25.00 
Nema17 EW17-220 33.7 1.80  2.00  0.70  1.40  0.3min 4.00  40.00 
EW17-320 39.2 1.80  2.00  1.00  1.80  0.45min 4.00  60.00 
EW17-320D 39.2 1.80  2.00  1.00  1.80  0.45min 4.00  60.00 
EW17-420 47.2 1.80  2.00  1.00  2.00  0.56min 4.00  80.00 
EW17-420D 47.2 1.80  2.00  1.00  2.00  0.56min 4.00  80.00 
EW17-420M 80.1 1.80  2.00  1.35  3.20  0.48min 4.00  77.00 
EW17-520 60 1.80  2.00  1.35  2.90  0.70min 4.00  115.00 
EW17-520M 99.1 1.80  2.00  1.77  4.00  0.72min 4.00  110.00 
Nema23 EW23-140 41.9 1.80  4.00  0.37  1.00  0.70min 4.00  170.00 
EW23-240 52.9 1.80  4.00  0.45  1.70  1.25min 4.00  290.00 
EW23-240D 52.9 1.80  4.00  0.45  1.70  1.25min 4.00  290.00 
EW23-240M 95.5 1.80  4.00  0.44  1.40  1.20min 4.00  480.00 
EW23-340 76.4 1.80  4.00  0.50  1.80  2.00min 4.00  520.00 
EW23-340D 76.4 1.80  4.00  0.50  1.80  2.00min 4.00  520.00 
EW23-350M 116.5 1.80  5.00  0.40  1.80  2.00min 4.00  480.00 
Nema24 EW24-240 54.5 1.80  4.00  0.45  1.20  1.40min 4.00  450.00 
EW24-440 85.5 1.80  4.00  0.80  3.00  3.00min 4.00  900.00 
EW24-450M 125.6 1.80  5.00  0.42  1.80  3.00min 4.00  900.00 
Nema34 EW34-260 79.5 1.80  6.00  0.38  2.80  4.5min 4.00  1900.00 
EW34-360 99 1.80  6.00  0.47  3.90  6.00min 4.00  2700.00 
EW34-460M 155.3 1.80  6.00  0.54  5.00  8.20min 4.00  3800.00 
EW34-560 129 1.80  6.00  0.64  6.00  9.00min 4.00  4000.00 
EW34-660 159.5 1.80  6.00  0.72  7.30  12min. 4.00  5000.00 
EH34-530 129 1.80  3.60  1.06  10.00  7.1min 4.00  4000.00 
US $20-120
/ Piece
|
1 Piece

(Min. Order)

###

Application: Medical and Laboratory Equipment
Speed: Low Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Driving
Number of Poles: 2

###

Customization:

###

Flange
NEMA 34
Step angle
1.8 [°] ± 5 [%]
  Holding torque   8.2 N.m MIN
Phase resistance
0.54 [Ohm] ± 10 [%]
Phase inductance
5.0 [mH] ± 20 [%]
Rotor inertia
3800 [g.cm²]
Ambient temperature
-20 [°C] ~ +50 [°C]
Temperature rise
80 [K]
Dielectric strength
500 [VAC 1 Minute]
Class protection
IP20
Max. shaft radial load
220 [N]
Max. shaft axial load
60 [N]
Weight
4000 [g.]

###

Nema Model Length Step Angle Current/Phase Resistance/Phase Inductance/Phase Holding Torque # of Leads Rotor Inertia
(L)mm ( °) A Ω mH N.M. No. g.cm2
OPEN LOOP STEP MOTOR
Nema8 EW08-210H 37.8 1.80  1.00  4.30  1.70  0.04min 4.00  2.90 
Nema11 EW11-110 30.1 1.80  1.00  4.50  3.80  0.08min 4.00  5.00 
EW11-110H 30.1 1.80  1.00  4.50  4.00  0.07min 4.00  9.00 
EW11-310 50.4 1.80  1.00  2.50  2.20  0.14min 4.00  20.00 
EW11-310D 50.4 1.80  1.00  2.50  2.20  0.14min 4.00  20.00 
Nema14 EW14-110 25.5 1.80  1.00  3.30  3.80  0.17min 4.00  25.00 
EW14-210 40.5 1.80  1.00  4.00  6.10  0.2min 4.00  25.00 
Nema17 EW17-220 33.7 1.80  2.00  0.70  1.40  0.3min 4.00  40.00 
EW17-320 39.2 1.80  2.00  1.00  1.80  0.45min 4.00  60.00 
EW17-320D 39.2 1.80  2.00  1.00  1.80  0.45min 4.00  60.00 
EW17-420 47.2 1.80  2.00  1.00  2.00  0.56min 4.00  80.00 
EW17-420D 47.2 1.80  2.00  1.00  2.00  0.56min 4.00  80.00 
EW17-420M 80.1 1.80  2.00  1.35  3.20  0.48min 4.00  77.00 
EW17-520 60 1.80  2.00  1.35  2.90  0.70min 4.00  115.00 
EW17-520M 99.1 1.80  2.00  1.77  4.00  0.72min 4.00  110.00 
Nema23 EW23-140 41.9 1.80  4.00  0.37  1.00  0.70min 4.00  170.00 
EW23-240 52.9 1.80  4.00  0.45  1.70  1.25min 4.00  290.00 
EW23-240D 52.9 1.80  4.00  0.45  1.70  1.25min 4.00  290.00 
EW23-240M 95.5 1.80  4.00  0.44  1.40  1.20min 4.00  480.00 
EW23-340 76.4 1.80  4.00  0.50  1.80  2.00min 4.00  520.00 
EW23-340D 76.4 1.80  4.00  0.50  1.80  2.00min 4.00  520.00 
EW23-350M 116.5 1.80  5.00  0.40  1.80  2.00min 4.00  480.00 
Nema24 EW24-240 54.5 1.80  4.00  0.45  1.20  1.40min 4.00  450.00 
EW24-440 85.5 1.80  4.00  0.80  3.00  3.00min 4.00  900.00 
EW24-450M 125.6 1.80  5.00  0.42  1.80  3.00min 4.00  900.00 
Nema34 EW34-260 79.5 1.80  6.00  0.38  2.80  4.5min 4.00  1900.00 
EW34-360 99 1.80  6.00  0.47  3.90  6.00min 4.00  2700.00 
EW34-460M 155.3 1.80  6.00  0.54  5.00  8.20min 4.00  3800.00 
EW34-560 129 1.80  6.00  0.64  6.00  9.00min 4.00  4000.00 
EW34-660 159.5 1.80  6.00  0.72  7.30  12min. 4.00  5000.00 
EH34-530 129 1.80  3.60  1.06  10.00  7.1min 4.00  4000.00 

Dynamic Modeling of a Planetary Motor

A planetary gear motor consists of a series of gears rotating in perfect synchrony, allowing them to deliver torque in a higher output capacity than a spur gear motor. Unlike the planetary motor, spur gear motors are simpler to build and cost less, but they are better for applications requiring lower torque output. That is because each gear carries the entire load. The following are some key differences between the two types of gearmotors.

planetary gear system

A planetary gear transmission is a type of gear mechanism that transfers torque from one source to another, usually a rotary motion. Moreover, this type of gear transmission requires dynamic modeling to investigate its durability and reliability. Previous studies included both uncoupled and coupled meshing models for the analysis of planetary gear transmission. The combined model considers both the shaft structural stiffness and the bearing support stiffness. In some applications, the flexible planetary gear may affect the dynamic response of the system.
In a planetary gear device, the axial end surface of the cylindrical portion is rotatable relative to the separating plate. This mechanism retains lubricant. It is also capable of preventing foreign particles from entering the planetary gear system. A planetary gear device is a great choice if your planetary motor’s speed is high. A high-quality planetary gear system can provide a superior performance than conventional systems.
A planetary gear system is a complex mechanism, involving three moving links that are connected to each other through joints. The sun gear acts as an input and the planet gears act as outputs. They rotate about their axes at a ratio determined by the number of teeth on each gear. The sun gear has 24 teeth, while the planet gears have three-quarters that ratio. This ratio makes a planetary motor extremely efficient.
Motor

planetary gear train

To predict the free vibration response of a planetary motor gear train, it is essential to develop a mathematical model for the system. Previously, static and dynamic models were used to study the behavior of planetary motor gear trains. In this study, a dynamic model was developed to investigate the effects of key design parameters on the vibratory response. Key parameters for planetary gear transmissions include the structure stiffness and mesh stiffness, and the mass and location of the shaft and bearing supports.
The design of the planetary motor gear train consists of several stages that can run with variable input speeds. The design of the gear train enables the transmission of high torques by dividing the load across multiple planetary gears. In addition, the planetary gear train has multiple teeth which mesh simultaneously in operation. This design also allows for higher efficiency and transmittable torque. Here are some other advantages of planetary motor gear trains. All these advantages make planetary motor gear trains one of the most popular types of planetary motors.
The compact footprint of planetary gears allows for excellent heat dissipation. High speeds and sustained performances will require lubrication. This lubricant can also reduce noise and vibration. But if these characteristics are not desirable for your application, you can choose a different gear type. Alternatively, if you want to maintain high performance, a planetary motor gear train will be the best choice. So, what are the advantages of planetary motor gears?

planetary gear train with fixed carrier train ratio

The planetary gear train is a common type of transmission in various machines. Its main advantages are high efficiency, compactness, large transmission ratio, and power-to-weight ratio. This type of gear train is a combination of spur gears, single-helical gears, and herringbone gears. Herringbone planetary gears have lower axial force and high load carrying capacity. Herringbone planetary gears are commonly used in heavy machinery and transmissions of large vehicles.
To use a planetary gear train with a fixed carrier train ratio, the first and second planets must be in a carrier position. The first planet is rotated so that its teeth mesh with the sun’s. The second planet, however, cannot rotate. It must be in a carrier position so that it can mesh with the sun. This requires a high degree of precision, so the planetary gear train is usually made of multiple sets. A little analysis will simplify this design.
The planetary gear train is made up of three components. The outer ring gear is supported by a ring gear. Each gear is positioned at a specific angle relative to one another. This allows the gears to rotate at a fixed rate while transferring the motion. This design is also popular in bicycles and other small vehicles. If the planetary gear train has several stages, multiple ring gears may be shared. A stationary ring gear is also used in pencil sharpener mechanisms. Planet gears are extended into cylindrical cutters. The ring gear is stationary and the planet gears rotate around a sun axis. In the case of this design, the outer ring gear will have a -3/2 planet gear ratio.
Motor

planetary gear train with zero helix angle

The torque distribution in a planetary gear is skewed, and this will drastically reduce the load carrying capacity of a needle bearing, and therefore the life of the bearing. To better understand how this can affect a gear train, we will examine two studies conducted on the load distribution of a planetary gear with a zero helix angle. The first study was done with a highly specialized program from the bearing manufacturer INA/FAG. The red line represents the load distribution along a needle roller in a zero helix gear, while the green line corresponds to the same distribution of loads in a 15 degree helix angle gear.
Another method for determining a gear’s helix angle is to consider the ratio of the sun and planet gears. While the sun gear is normally on the input side, the planet gears are on the output side. The sun gear is stationary. The two gears are in engagement with a ring gear that rotates 45 degrees clockwise. Both gears are attached to pins that support the planet gears. In the figure below, you can see the tangential and axial gear mesh forces on a planetary gear train.
Another method used for calculating power loss in a planetary gear train is the use of an auto transmission. This type of gear provides balanced performance in both power efficiency and load capacity. Despite the complexities, this method provides a more accurate analysis of how the helix angle affects power loss in a planetary gear train. If you’re interested in reducing the power loss of a planetary gear train, read on!

planetary gear train with spur gears

A planetary gearset is a type of mechanical drive system that uses spur gears that move in opposite directions within a plane. Spur gears are one of the more basic types of gears, as they don’t require any specialty cuts or angles to work. Instead, spur gears use a complex tooth shape to determine where the teeth will make contact. This in turn, will determine the amount of power, torque, and speed they can produce.
A two-stage planetary gear train with spur gears is also possible to run at variable input speeds. For such a setup, a mathematical model of the gear train is developed. Simulation of the dynamic behaviour highlights the non-stationary effects, and the results are in good agreement with the experimental data. As the ratio of spur gears to spur gears is not constant, it is called a dedendum.
A planetary gear train with spur gears is a type of epicyclic gear train. In this case, spur gears run between gears that contain both internal and external teeth. The circumferential motion of the spur gears is analogous to the rotation of planets in the solar system. There are four main components of a planetary gear train. The planet gear is positioned inside the sun gear and rotates to transfer motion to the sun gear. The planet gears are mounted on a joint carrier that is connected to the output shaft.
Motor

planetary gear train with helical gears

A planetary gear train with helical teeth is an extremely powerful transmission system that can provide high levels of power density. Helical gears are used to increase efficiency by providing a more efficient alternative to conventional worm gears. This type of transmission has the potential to improve the overall performance of a system, and its benefits extend far beyond the power density. But what makes this transmission system so appealing? What are the key factors to consider when designing this type of transmission system?
The most basic planetary train consists of the sun gear, planet gear, and ring gear elements. The number of planets varies, but the basic structure of planetary gears is similar. A simple planetary geartrain has the sun gear driving a carrier assembly. The number of planets can be as low as two or as high as six. A planetary gear train has a low mass inertia and is compact and reliable.
The mesh phase properties of a planetary gear train are particularly important in designing the profiles. Various parameters such as mesh phase difference and tooth profile modifications must be studied in depth in order to fully understand the dynamic characteristics of a PGT. These factors, together with others, determine the helical gears’ performance. It is therefore essential to understand the mesh phase of a planetary gear train to design it effectively.

China Hot Sale High Quality Electric NEMA 34 Easy Servo Stepper Motor with Planetary Gearbox     with Hot selling	China Hot Sale High Quality Electric NEMA 34 Easy Servo Stepper Motor with Planetary Gearbox     with Hot selling
editor by czh 2023-01-12

China 42mm Brush / Brushless / Stepper Gear Motor with Metal Planetary Gearbox Low Noise with Best Sales

Product Description

We are a factory specialized in metal parts hardware & metal gearbox geared motor through powder metallurgy process .We services with ODM/OEM gearbox design and development , gearmotors manufacture.
A planetary gear set is made up of 3 types of gears , a sun gear , planet gears and a ring gear . The sun gear at high speed is located at the center of the gears , and transmits torque to the planet gears which are typically mounted on the moveable carrier .The planet gears around the central axis rotation ,mesh with the sun gear and an outer ring gear . As all the planet carriers turns , it delivers low-speed, high-torque output .
Low-Cost, High-Efficiency Planetary Gear Systems
Planetary gearboxes are especially efficient, they are suitable for continuous, intermittent and alternating operation as well as for clockwise and anticlockwise rotation. Their use results in an increased performance of the entire drive train since the choice of the right gearbox allows for a smaller motor and thereby increases the economic efficiency of the entire drive train.
planetary gearbox with optimized helical gearset teeth was developed for highly demanding applications. These gearbox is perfect for applications ranging from basic machinedesign to printing, packaging, and robotics.
Features:
The highest dynamics in multiple axis systems
Unrivaled price-performance ratio
Low heat generation at highest speeds
For any mounting position
Lifetime lubrication for maintenance-free operation
Precise gearing

Description:
Product Name : 36mm planet gearbox with DC brushed motors  high torque geared motor / Speed reducer / steel gearbox
Gearbox Type: Planetary
Material: Steel 

No-load Speed: 3-1,375 rpm

Rated Load Speed: 3-1,280 rpm
 

No-load Current: 300-325 mA

Rated Load Current: 1,679-1,684 mA

Gear Ratio : 5:1 , 10:1 , 20:1 , 25:1 , 30:1 , 40:1 , 50:1 , 60:1 ,70:1…100:1…  optional
Gearbox diameter : 6mm , 8mm , 12mm , 16mm , 22mm , 24mm ,28mm, 32mm ,36mm, 38mm , 42mm ……
12-24V available .

Planetary Gearbox advantages:

  • Easy and functional flange, foot, or shaft-mounting design
  • High torque transmitted
  • Extended range of transmission ratios and output speeds available

Application:
monitor,automatic vending machine,automatic cruise control,door lock actuator, retractable rearview mirror, meters, optic axis control device, head light beam level adjuster,printers,conditioning damper actuator,Car tail gate electric putter,tooth brush,vibrator, sanitary ware,coffee machine,Sweeping robot,etc.

Welcome send drawings for OEM service .

 

Workshop

US $5.98
/ Piece
|
2,000 Pieces

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Three-Step

###

Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
US $5.98
/ Piece
|
2,000 Pieces

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Three-Step

###

Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

The Basics of a Planetary Motor

A Planetary Motor is a type of gearmotor that uses multiple planetary gears to deliver torque. This system minimizes the chances of failure of individual gears and increases output capacity. Compared to the planetary motor, the spur gear motor is less complex and less expensive. However, a spur gear motor is generally more suitable for applications requiring low torque. This is because each gear is responsible for the entire load, limiting its torque.

Self-centering planetary gears

This self-centering mechanism for a planetary motor is based on a helical arrangement. The helical structure involves a sun-planet, with its crown and slope modified. The gears are mounted on a ring and share the load evenly. The helical arrangement can be either self-centering or self-resonant. This method is suited for both applications.
A helical planetary gear transmission is illustrated in FIG. 1. A helical configuration includes an output shaft 18 and a sun gear 18. The drive shaft extends through an opening in the cover to engage drive pins on the planet carriers. The drive shaft of the planetary gears can be fixed to the helical arrangement or can be removable. The transmission system is symmetrical, allowing the output shaft of the planetary motor to rotate radially in response to the forces acting on the planet gears.
A flexible pin can improve load sharing. This modification may decrease the face load distribution, but increases the (K_Hbeta) parameter. This effect affects the gear rating and life. It is important to understand the effects of flexible pins. It is worth noting that there are several other disadvantages of flexible pins in helical PGSs. The benefits of flexible pins are discussed below.
Using self-centering planetary gears for a helical planetary motor is essential for symmetrical force distribution. These gears ensure the symmetry of force distribution. They can also be used for self-centering applications. Self-centering planetary gears also guarantee the proper force distribution. They are used to drive a planetary motor. The gearhead is made of a ring gear, and the output shaft is supported by two ball bearings. Self-centering planetary gears can handle a high torque input, and can be suited for many applications.
To solve for a planetary gear mechanism, you need to find its pitch curve. The first step is to find the radius of the internal gear ring. A noncircular planetary gear mechanism should be able to satisfy constraints that can be complex and nonlinear. Using a computer, you can solve for these constraints by analyzing the profile of the planetary wheel’s tooth curve.
Motor

High torque

Compared to the conventional planetary motors, high-torque planetary motors have a higher output torque and better transmission efficiency. The high-torque planetary motors are designed to withstand large loads and are used in many types of applications, such as medical equipment and miniature consumer electronics. Their compact design makes them suitable for small space-saving applications. In addition, these motors are designed for high-speed operation.
They come with a variety of shaft configurations and have a wide range of price-performance ratios. The FAULHABER planetary gearboxes are made of plastic, resulting in a good price-performance ratio. In addition, plastic input stage gears are used in applications requiring high torques, and steel input stage gears are available for higher speeds. For difficult operating conditions, modified lubrication is available.
Various planetary gear motors are available in different sizes and power levels. Generally, planetary gear motors are made of steel, brass, or plastic, though some use plastic for their gears. Steel-cut gears are the most durable, and are ideal for applications that require a high amount of torque. Similarly, nickel-steel gears are more lubricated and can withstand a high amount of wear.
The output torque of a high-torque planetary gearbox depends on its rated input speed. Industrial-grade high-torque planetary gearboxes are capable of up to 18000 RPM. Their output torque is not higher than 2000 nm. They are also used in machines where a planet is decelerating. Their working temperature ranges between 25 and 100 degrees Celsius. For best results, it is best to choose the right size for the application.
A high-torque planetary gearbox is the most suitable type of high-torque planetary motor. It is important to determine the deceleration ratio before buying one. If there is no product catalog that matches your servo motor, consider buying a close-fitting high-torque planetary gearbox. There are also high-torque planetary gearboxes available for custom-made applications.
Motor

High efficiency

A planetary gearbox is a type of mechanical device that is used for high-torque transmission. This gearbox is made of multiple pairs of gears. Large gears on the output shaft mesh with small gears on the input shaft. The ratio between the big and small gear teeth determines the transmittable torque. High-efficiency planetary gearheads are available for linear motion, axial loads, and sterilizable applications.
The AG2400 high-end gear unit series is ideally matched to Beckhoff’s extensive line of servomotors and gearboxes. Its single-stage and multi-stage transmission ratios are highly flexible and can be matched to different robot types. Its modified lubrication helps it operate in difficult operating conditions. These high-performance gear units are available in a wide range of sizes.
A planetary gear motor can be made of steel, nickel-steel, or brass. In addition to steel, some models use plastic. The planetary gears share work between multiple gears, making it easy to transfer high amounts of power without putting a lot of stress on the gears. The gears in a planetary gear motor are held together by a movable arm. High-efficiency planetary gear motors are more efficient than traditional gearmotors.
While a planetary gear motor can generate torque, it is more efficient and cheaper to produce. The planetary gear system is designed with all gears operating in synchrony, minimizing the chance of a single gear failure. The efficiency of a planetary gearmotor makes it a popular choice for high-torque applications. This type of motor is suitable for many applications, and is less expensive than a standard geared motor.
The planetary gearbox is a combination of a planetary type gearbox and a DC motor. The planetary gearbox is compact, versatile, and efficient, and can be used in a wide range of industrial environments. The planetary gearbox with an HN210 DC motor is used in a 22mm OD, PPH, and ph configuration with voltage operating between 6V and 24V. It is available in many configurations and can be custom-made to meet your application requirements.
Motor

High cost

In general, planetary gearmotors are more expensive than other configurations of gearmotors. This is due to the complexity of their design, which involves the use of a central sun gear and a set of planetary gears which mesh with each other. The entire assembly is enclosed in a larger internal tooth gear. However, planetary motors are more effective for higher load requirements. The cost of planetary motors varies depending on the number of gears and the number of planetary gears in the system.
If you want to build a planetary gearbox, you can purchase a gearbox for the motor. These gearboxes are often available with several ratios, and you can use any one to create a custom ratio. The cost of a gearbox depends on how much power you want to move with the gearbox, and how much gear ratio you need. You can even contact your local FRC team to purchase a gearbox for the motor.
Gearboxes play a major role in determining the efficiency of a planetary gearmotor. The output shafts used for this type of motor are usually made of steel or nickel-steel, while those used in planetary gearboxes are made from brass or plastic. The former is the most durable and is best for applications that require high torque. The latter, however, is more absorbent and is better at holding lubricant.
Using a planetary gearbox will allow you to reduce the input power required for the stepper motor. However, this is not without its downsides. A planetary gearbox can also be replaced with a spare part. A planetary gearbox is inexpensive, and its spare parts are inexpensive. A planetary gearbox has low cost compared to a planetary motor. Its advantages make it more desirable in certain applications.
Another advantage of a planetary gear unit is the ability to handle ultra-low speeds. Using a planetary gearbox allows stepper motors to avoid resonance zones, which can cause them to crawl. In addition, the planetary gear unit allows for safe and efficient cleaning. So, whether you’re considering a planetary gear unit for a particular application, these gear units can help you get exactly what you need.

China 42mm Brush / Brushless / Stepper Gear Motor with Metal Planetary Gearbox Low Noise     with Best SalesChina 42mm Brush / Brushless / Stepper Gear Motor with Metal Planetary Gearbox Low Noise     with Best Sales
editor by czh 2022-11-27

in Volgograd Russian Federation sales price shop near me near me shop factory supplier NEMA 8, 11, 14, 16, 17, 23, 34, 43 Electric Stepping Stepper Gear Motor with Planetary Gearbox manufacturer best Cost Custom Cheap wholesaler

  in Volgograd Russian Federation  sales   price   shop   near me   near me shop   factory   supplier NEMA 8, 11, 14, 16, 17, 23, 34, 43 Electric Stepping Stepper Gear Motor with Planetary Gearbox manufacturer   best   Cost   Custom   Cheap   wholesaler

Support & Good quality controlWe offer in depth drawings and offer you whenever needed. We supply OEM services. Our goods are made by present day computerized machinery and tools. Stepper Equipment EPT

#8226 Producer Portion Quantity: HP201 HP281 HP351 HP421
#8226 EPT Type: Planetary EPT Stepper EPT Bipolar 4 Wires two Section
#8226 Body Dimensions: 20x20mm Geared Stepper EPT Nema eight, NEMA eleven, NEMA14, NEMA17 Mounting
#8226 Stage Angle: 1.8deg, .9deg, .36deg
#8226 EPT Effiency: 66%—ninety%
#8226 Application: 3D Printer motor, Healthcare EPT EPT, Ventilator motor

Drawing of NEMA 8 Hybrid Stepper Gear EPT:

Drawing of NEMA 11 Hybrid Stepper Gear EPT:

Drawing of NEMA 14 Hybrid Stepper Equipment EPT:

Drawing of NEMA seventeen Hybrid Stepper Gear EPT:

Drawing of NEMA 23 Stepping EPT

Drawing of NEMA 34 Stage Motor

NEMA eight Hybrid Stepper Gear EPT

EPT Electrical Specification
Collection Design Step Angle ( o ) L
(mm)
Rated Existing (A) Section
Resistance
( Omega)
Phase
Inductance (mH)
EPT Torque
(N.cm)
Detent Torque (N.cm) EPT
Wire
(NO.)
EPT
Bodyweight
( g)
HP201-57121 one.8 28 .2 23 8.two one.4 .two four fifty
HP201-57121 1.8 34 .2 twenty five 8.four one.8 .3 four 70
HP201-003571 1.8 forty .2 32 8.eight 2.6 .5 four eighty two
Other EPT Electrical Specification please refer to Hybrid Stepper EPT world wide web

EPT Specification
Ratio three.71 5.18 14 19 27 51 seventy one a hundred 139 189 264 369
EPT Collection 1 two three 4
Duration
( mm)
22.4 33. 41.five 49.eight
Allowable Torque
(Kg.cm)
6 ten 16 twenty
Instantaneous Torque
(Kg.cm)
18 thirty 48 sixty
Effectiveness
(%)
ninety% eighty one% 73% 66%
Weight
(g)
35 forty five 55 65
We can manufacture products according to customer’s needs

NEMA eleven Hybrid Stepper Equipment EPT

EPT Electrical Specification
Sequence Model Step Angle ( o ) L
(mm)
Rated Present (A) Period
Resistance
( ampOmega)
Period
Inductance (mH)
EPT Torque
(N.cm)
Detent Torque (N.cm) EPT
Wire
(NO.)
EPT
Fat
( g)
HP281-00506 1.eight 28 .six 4.two 2.two 4.5 .3 4 a hundred and five
HP281-00606 one.8 33 .6 five.5 3.two six. .four 4 one hundred ten
HP281-00806 1.8 forty one .6 7. six. eight. .5 4 one hundred forty
Other EPT Electrical Specification you should refer to Hybrid Stepper EPT internet

EPT Specification
Ratio three.seventy one 5.18 14 19 27 51 seventy one 100 139 189 264 369
EPT Series 1 two 3 4
Duration
(mm)
31. forty.one 49. 57.9
Allowable Torque
(Kg.cm)
twelve 20 32 40
Instantaneous Torque
(Kg.cm)
36 sixty 96 120
Effectiveness
(%)
90% eighty one% 73% sixty six%
Bodyweight
(g)
60 85 ninety five one hundred ten
We can manufacture products in accordance to buyer amprsquos requirements

NEMA fourteen Hybrid Stepper Gear EPT

EPT Electrical Specification
Collection Product Step Angle ( o ) L
(mm)
Rated Recent (A) Phase
Resistance
( ampOmega)
Section
Inductance (mH)
EPT Torque
(N.cm)
Detent Torque (N.cm) EPT
Wire
(NO.)
EPT
Excess weight
( g)
HP351-01205 1.8 28 .46 twenty 14 twelve .8 four 120
HP351-01804 1.eight 34 .42 twenty five 32 18 one. 4 a hundred and sixty
Other EPT Electrical Specification remember to refer to Hybrid Stepper EPT internet

EPT Specification
Ratio 3.seventy one five.eighteen 14 19 27 fifty one seventy one one hundred 139
EPT Series 1 2 3
Length
(mm)
31. 38.5 forty eight.two
Allowable Torque
(Kg.cm)
18 30 48
Instantaneous Torque
(Kg.cm)
fifty four ninety a hundred and forty four
Effectiveness
(%)
ninety% eighty one% 73%
Bodyweight
(g)
195 210 290

NEMA seventeen Hybrid Stepper Gear EPT

EPT Electrical Specification
Collection Product Stage Angle ( o ) L
(mm)
Rated Existing (A) Stage
Resistance
( ampOmega)
Phase
Inductance (mH)
EPT Torque
(N.cm)
Detent Torque (N.cm) EPT
Wire
(NO.)
EPT
Excess weight
( g)
HP421-01206 one.eight 28 .six 8 ten twelve one.six four 150
HP421-57117 1.eight 34 one.7 1.2 one.eight 28 one.6 4 220
HP421-04013 one.8 forty 1.3 2.5 5. 40 2.two four 280
Other EPT Electrical Specification remember to refer to Hybrid Stepper EPT net

EPT Specification
Ratio 3.seventy one 5.eighteen 14 19 27 fifty one seventy one one hundred 139 189 264 369
EPT Collection one two 3 four
Length
(mm)
31. forty.one 49. fifty seven.nine
Allowable Torque
(Kg.cm)
12 twenty 32 40
Instantaneous Torque
(Kg.cm)
36 sixty 96 a hundred and twenty
Efficiency
(%)
90% eighty one% 73% sixty six%
Excess weight
(g)
60 85 95 a hundred and ten
We can manufacture products according to customer amprsquos demands

NEMA 34 Hybrid Stepper EPT

Electrical Specification
Collection Design Action Angle ( o ) L
(mm)
Rated Existing (A) Phase
Resistance
( ampOmega)
Period
Inductance (mH)
EPT Torque
(N.cm)
Detent Torque (N.cm) EPT
Wire
(NO.)
EPT
Excess weight
( kg)
H863-18040 1.8 sixty three 4. .68 2. 180 four.5 8 one.six
H863-18050 one.8 63 5. .forty five one.five a hundred and eighty four.five eight 1.six
H863-18571 1.eight sixty three 2.seven one.2 4.5 180 four.five 8 1.6
H863-18571 1.8 63 2.1 one.9 7.two one hundred eighty four.five eight 1.6
H863-32040 one.8 92 4. .89 three.8 320 6.5 eight two.6
H863-32050 1.8 ninety two 5. .58 two.eight 320 six.five eight 2.6
H863-32571 1.eight 92 2.7 one.seven 9. 320 6.5 eight two.6
H863-32571 one.8 92 two.1 2.7 15 320 six.5 eight two.six
H863-45040 1.8 122 4. one.one 5.six 450 10.five 8 3.8
H863-45050 1.eight 122 five. .82 three.6 450 ten.five eight three.eight
H863-45571 1.eight 122 2.7 2.5 12.five 450 ten.5 eight 3.8

NEMA 43 Hybrid Stepper EPT

Electrical Specification
Collection Product Phase Angle ( o ) L
(mm)
Rated Current (A) Stage
Resistance
( ampOmega)
Section
Inductance (mH)
EPT Torque
(N. m)
Detent Torque (N. cm) EPT
Wire
(NO.)
EPT
Fat
( kg)
H1101- 01260 one.8 one hundred 6. .five 6. 12 twenty.5 four 5.
H1101-01560 one.eight 117 six. .47 seven.5 15 24.5 four 5.8
H1101-01860 1.8 126 6. .66 10.five eighteen 21.5 four 6.8
H1101-57160 1.eight one hundred fifty six. .eight 13.5 22 35.five 4 8.four
H1101-02660 1.eight one hundred sixty five six. .87 sixteen. 26 forty five.five four nine.3
H1101-57160 1.eight two hundred 6. one.1 22 29 65.five 4 13.
H1101-57180 1.eight 200 8. .62 13.5 29 sixty five.5 four thirteen.

Manufacturing unit Capability
EPT EPT Co., Ltd., estabEPTd in 2006, and our main products are hybrid stepper motor, stepping motor EPTr, phase engine, stepping engine, integrated action servo motors, Our products are extensively utilised and used in the pursuing EPT: lighting method, projector, CNC, emiconductor, textile, laser, woodworking, printing, promoting, clothing, marble and ceramic, robotics and military.

Rewards
1. Brief EPT-Time
two. .one% defect charge and
three. one – 2 12 months promise period

Package
-Pack by PE foam in cartons, crates and pallets
-EPT through sea, air, courier
-EPT-time: three-8 weeks.

We can also provide under goods,

FAQ
Q1. What section is this stepping motor?
A: It is two stage with 1.8deg.

Q2. What is frame dimensions for NEMA 8 Stage Geared motor?
A: It is 20mm*20mm dimensions.

Q3. EPT a non-stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd motor for my application, can you assist?
A: Undoubtedly, most of our clients request customized configurations in one particular form or an additional. If you strategy on replacing a motor in an eXiHu (West Lake) Dis.sting software, just send out us a drawing or sample and we can support you discover a suited replacement. Alternatively, get in touch with us and describe your software, our engineers will work with you to EPT a solution tailor-created for you.

This autumn:How can I get your quotation of EPT action motor?
A:Make sure you send out us the details of the stepper motors you are in need to have of, also incEPTs the amount.

Q. What are your Stepper EPTs can be use to?
A: Our step motors can be use in CNC routers, CNC milling EPT, engraving EPT, EPT EPT, filling EPT, slicing EPT, printing EPT, laser EPT, carving EPT, labeling EPT, CCTV and robotic.

Q. What sort of Payment methods do you accept?
A: We can acknowledge Paypal and , TT.

Q: What sort of delivery methods do you use?
A:1) For samples or tiny batch of micro stepper motor, air shipping and delivery is suggested. (DHL, Fedex, TNT, UPS, EMS), We will give the monitoring No. After we get it soon after we ship out the merchandise.
two)For mass production or big batch of stepping motors, EPT transport/sea shipment is suggested .

Q: What is the lead time of stepper motors?
A: For mass generation, the lead time is dependent on the portions you require .

Q: What is your warranty time?
A: Guarantee time: 12 months. And we offer existence-EPT technological service and following-sale provider.

Q: Can you make tailored shaft?
A: We can make solitary shaft, double shaft or other shape.

Q: What is NEMA dimension of this motor?
A: It is NEMA eight with 1.8 diploma or .nine degree.

Q: What it the application for NEMA eight StepperGeared EPT
A: It could utilized as 3D Printer motor.

  in Volgograd Russian Federation  sales   price   shop   near me   near me shop   factory   supplier NEMA 8, 11, 14, 16, 17, 23, 34, 43 Electric Stepping Stepper Gear Motor with Planetary Gearbox manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Volgograd Russian Federation  sales   price   shop   near me   near me shop   factory   supplier NEMA 8, 11, 14, 16, 17, 23, 34, 43 Electric Stepping Stepper Gear Motor with Planetary Gearbox manufacturer   best   Cost   Custom   Cheap   wholesaler