Tag Archives: planetary reducer motor

China manufacturer Best Selling PA Series CNC Machine Servo Drive Planetary Gearbox Reducer motor engine

Product Description

Best Selling PA Series CNC Machine Servo Drive Planetary Gearbox Reducer

 

This helical planetary gearbox is used for servo motor and related device which need to reduce speed or enlarge torque! CZPT helical planetary gearboxes external diameter from 60 to 220, gear ratio from 3 to 100! It has high precision and are widely used with servo motor such like Panasonnic,Fuji, Mitsubishi, Omran,Delta, Teco.

Product Description

Description:
(1).The output shaft is made of large size,large span double bearing design,output shaft and planetary arm bracket as a whole.The input shaft is placed directly on the planet arm bracket to ensure that the reducer has high operating accuracy and maximum torsional rigidity.
(2).Shell and the inner ring gear used integrated design,quenching and tempering after the processing of the teeth so that it can achieve high torque,high precision,high wear resistance.Moreover surface nickel-plated anti-rust treatment,so that its corrosion resistance greatly enhanced.(3).The planetary gear transmission employs full needle roller without retainer to increase the contact surface,which greatly upgrades structural rigidity and service life.
(4).The gear is made of Japanese imported material.After the metal cutting process,the vacuum carburizing heat treatment to 58-62HRC. And then by the hobbing,Get the best tooth shape,tooth direction,to ensure that the gear of high precision and good impact toughness.
(5).Input shaft and sun gear integrated structure,in order to improve the operation accuracy of the reducer.

Product Parameters

Characteristic:
(1) Low Noise:The use of helical gear design,to achieve a smooth,quite operation of the reducer.
(2) High Precision:Backlash is 3 arcmin or less,accurate positioning.
(3) High Rigidity,High Torque:The output shaft used large size,large span double support bearing design,which improves the rigidity and torque of the reducer.
(4) High Efficiency:1-stage up to 95% or more,2-stage up to 92% or more.
(5) Maintenance-Free:Low grease wear,can be lifetime lubrication.
(6) Sealing Effect is Good:Lubricating grease with high viscosity,not easy to separate the characteristics,ip65 protection class to ensure that no grease leakage.
(7) Installation Unrestrained:Can be installed arbitrarily.
(8) Wide Applicability:Applicable to any type of servo motor.
(9) An organic [integral] whole output axis.

Specifications PA60 PA90 PA120 PA140 PA180 PA220
Technal Parameters
Max. Torque Nm 1.5times rated torque
Emergency Stop Torque Nm 2.5times rated torque
Max. Radial Load N 1530 3250 6700 9400 14500 16500
Max. Axial Load N 630 1300 3000 4700 7250 8250
Torsional Rigidity Nm/arcmin 6 12 23 47 130 205
Max.Input Speed rpm 8000 6000 6000 6000 6000 3000
Rated Input Speed rpm 4000 3000 3000 3000 3000 1500
Noise dB ≤58 ≤60 ≤65 ≤68 ≤68 ≤72
Average Life Time h 20000
Efficiency Of Full Load % L1≥95%                        L2≥90%
Return Backlash P1 L1 arcmin ≤3 ≤3 ≤3 ≤3 ≤3 ≤3
L2 arcmin ≤5 ≤5 ≤5 ≤5 ≤5 ≤5
P2 L1 arcmin ≤5 ≤5 ≤5 ≤5 ≤5 ≤5
L2 arcmin ≤7 ≤7 ≤7 ≤7 ≤7 ≤7
Moment Of Inertia Table L1 3 Kg*cm2 0.16 0.61 3.25 9.21 28.98 69.7
4 Kg*cm2 0.14 0.48 2.74 7.54 23.67 54.61
5 Kg*cm2 0.13 0.47 2.71 7.42 23.29 53.51
7 Kg*cm2 0.13 0.45 2.62 7.14 22.48 50.92
8 Kg*cm2 0.13 0.45 2.6 7.14 / /
10 Kg*cm2 0.13 0.4 2.57 7.03 22.51 50.18
L2 12 Kg*cm2 0.13 0.45 0.45 2.63 7.3 23.59
15 Kg*cm2 0.13 0.45 0.45 2.63 7.3 23.59
20 Kg*cm2 0.13 0.45 0.45 2.63 6.92 23.33
25 Kg*cm2 0.13 0.45 0.4 2.63 6.92 22.68
28 Kg*cm2 0.13 0.45 0.45 2.43 6.92 23.33
30 Kg*cm2 0.13 0.45 0.45 2.43 7.3 25.59
35 Kg*cm2 0.13 0.4 0.4 2.43 6.92 22.68
40 Kg*cm2 0.13 0.45 0.45 2.43 6.92 23.33
50 Kg*cm2 0.13 0.4 0.4 2.39 6.92 22.68
70 Kg*cm2 0.13 0.4 0.4 2.39 6.72 22.68
100 Kg*cm2 0.13 0.4 0.4 2.39 6.72 22.68
Technical Parameter Level Ratio   PA60 PA90 PA120 PA140 PA180 PA220
Rated Torque L1 3 Nm 40 105 165 360 880 1100
4 Nm 45 130 230 480 880 1800
5 Nm 45 130 230 480 1100 1800
7 Nm 45 100 220 480 1100 1600
8 Nm 40 90 200 440 / /
10 Nm 30 75 175 360 770 1200
L2 12 Nm 40 105 165 360 880 1100
15 Nm 40 105 165 360 880 1100
20 Nm 45 130 230 480 1100 1800
25 Nm 45 130 230 480 1100 1800
28 Nm 45 130 230 480 1100 1800
30 Nm 40 105 165 360 880 1100
35 Nm 45 130 230 480 1100 1800
40 Nm 45 130 230 480 1100 1800
50 Nm 45 130 230 480 1100 1800
70 Nm 45 100 220 480 1100 1600
100 Nm 30 75 175 360 770 1200
Degree Of Protection   IP65
Operation Temprature ºC  – 10ºC to -90ºC
Weight L1 kg 1.25 3.75 8.5 16 28.5 49.3
L2 kg 1.75 5.1 12 21.5 40 62.5

Company Profile

 

Packaging & Shipping

1. Lead time: 10-15 days as usual, 30 days in busy season, it will be based on the detailed order quantity;
2. Delivery: DHL/ UPS/ FEDEX/ EMS/ TNT

FAQ

1. who are we?
Hefa Group is based in ZheJiang , China, start from 1998,has a 3 subsidiaries in total.The Main Products is planetary gearbox,timing belt pulley, helical gear,spur gear,gear rack,gear ring,chain wheel,hollow rotating platform,module,etc

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.how to choose the suitable planetary gearbox?
First of all,we need you to be CZPT to provide relevant parameters.If you have a motor drawing,it will let us recommend a suitable gearbox for you faster.If not,we hope you can provide the following motor parameters:output speed,output torque,voltage,current,ip,noise,operating conditions,motor size and power,etc

4. why should you buy from us not from other suppliers?
We are a 22 years experiences manufacturer on making the gears, specializing in manufacturing all kinds of spur/bevel/helical gear, grinding gear, gear shaft, timing pulley, rack, planetary gear reducer, timing belt and such transmission gear parts

5. what services can we provide?
Accepted Delivery Terms: Fedex,DHL,UPS;
Accepted Payment Currency:USD,EUR,HKD,GBP,CNY;
Accepted Payment Type: T/T,L/C,PayPal,Western Union;
Language Spoken:English,Chinese,Japanese

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car, Spring Machinery
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Layout: Coaxial
Gear Shape: Helical Gear
Step: Single-Step
Samples:
US$ 99/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

Motor

Benefits of a Planetary Motor

If you’re looking for an affordable way to power a machine, consider purchasing a Planetary Motor. These units are designed to provide a massive range of gear reductions, and are capable of generating much higher torques and torque density than other types of drive systems. This article will explain why you should consider purchasing one for your needs. And we’ll also discuss the differences between a planetary and spur gear system, as well as how you can benefit from them.

planetary gears

Planetary gears in a motor are used to reduce the speed of rotation of the armature 8. The reduction ratio is determined by the structure of the planetary gear device. The output shaft 5 rotates through the device with the assistance of the ring gear 4. The ring gear 4 engages with the pinion 3 once the shaft is rotated to the engagement position. The transmission of rotational torque from the ring gear to the armature causes the motor to start.
The axial end surface of a planetary gear device has two circular grooves 21. The depressed portion is used to retain lubricant. This lubricant prevents foreign particles from entering the planetary gear space. This feature enables the planetary gear device to be compact and lightweight. The cylindrical portion also minimizes the mass inertia. In this way, the planetary gear device can be a good choice for a motor with limited space.
Because of their compact footprint, planetary gears are great for reducing heat. In addition, this design allows them to be cooled. If you need high speeds and sustained performance, you may want to consider using lubricants. The lubricants present a cooling effect and reduce noise and vibration. If you want to maximize the efficiency of your motor, invest in a planetary gear hub drivetrain.
The planetary gear head has an internal sun gear that drives the multiple outer gears. These gears mesh together with the outer ring that is fixed to the motor housing. In industrial applications, planetary gears are used with an increasing number of teeth. This distribution of power ensures higher efficiency and transmittable torque. There are many advantages of using a planetary gear motor. These advantages include:

planetary gearboxes

A planetary gearbox is a type of drivetrain in which the input and output shafts are connected with a planetary structure. A planetary gearset can have three main components: an input gear, a planetary output gear, and a stationary position. Different gears can be used to change the transmission ratios. The planetary structure arrangement gives the planetary gearset high rigidity and minimizes backlash. This high rigidity is crucial for quick start-stop cycles and rotational direction.
Planetary gears need to be lubricated regularly to prevent wear and tear. In addition, transmissions must be serviced regularly, which can include fluid changes. The gears in a planetary gearbox will wear out with time, and any problems should be repaired immediately. However, if the gears are damaged, or if they are faulty, a planetary gearbox manufacturer will repair it for free.
A planetary gearbox is typically a 2-speed design, but professional manufacturers can provide triple and single-speed sets. Planetary gearboxes are also compatible with hydraulic, electromagnetic, and dynamic braking systems. The first step to designing a planetary gearbox is defining your application and the desired outcome. Famous constructors use a consultative modeling approach, starting each project by studying machine torque and operating conditions.
As the planetary gearbox is a compact design, space is limited. Therefore, bearings need to be selected carefully. The compact needle roller bearings are the most common option, but they cannot tolerate large axial forces. Those that can handle high axial forces, such as worm gears, should opt for tapered roller bearings. So, what are the advantages and disadvantages of a helical gearbox?

planetary gear motors

When we think of planetary gear motors, we tend to think of large and powerful machines, but in fact, there are many smaller, more inexpensive versions of the same machine. These motors are often made of plastic, and can be as small as six millimeters in diameter. Unlike their larger counterparts, they have only one gear in the transmission, and are made with a small diameter and small number of teeth.
They are similar to the solar system, with the planets rotating around a sun gear. The planet pinions mesh with the ring gear inside the sun gear. All of these gears are connected by a planetary carrier, which is the output shaft of the gearbox. The ring gear and planetary carrier assembly are attached to each other through a series of joints. When power is applied to any of these members, the entire assembly will rotate.
Compared to other configurations, planetary gearmotors are more complicated. Their construction consists of a sun gear centered in the center and several smaller gears that mesh with the central sun gear. These gears are enclosed in a larger internal tooth gear. This design allows them to handle larger loads than conventional gear motors, as the load is distributed among several gears. This type of motor is typically more expensive than other configurations, but can withstand the higher-load requirements of some machines.
Because they are cylindrical in shape, planetary gear motors are incredibly versatile. They can be used in various applications, including automatic transmissions. They are also used in applications where high-precision and speed are necessary. Furthermore, the planetary gear motor is robust and is characterized by low vibrations. The advantages of using a planetary gear motor are vast and include:
Motor

planetary gears vs spur gears

A planetary motor uses multiple teeth to share the load of rotating parts. This gives planetary gears high stiffness and low backlash – often as low as one or two arc minutes. These characteristics are important for applications that undergo frequent start-stop cycles or rotational direction changes. This article discusses the benefits of planetary gears and how they differ from spur gears. You can watch the animation below for a clearer understanding of how they operate and how they differ from spur gears.
Planetary gears move in a periodic manner, with a relatively small meshing frequency. As the meshing frequency increases, the amplitude of the frequency also increases. The amplitude of this frequency is small at low clearance values, and increases dramatically at higher clearance levels. The amplitude of the frequency is higher when the clearance reaches 0.2-0.6. The amplitude increases rapidly, whereas wear increases slowly after the initial 0.2-0.6-inch-wide clearance.
In high-speed, high-torque applications, a planetary motor is more effective. It has multiple contact points for greater torque and higher speed. If you are not sure which type to choose, you can consult with an expert and design a custom gear. If you are unsure of what type of motor you need, contact Twirl Motor and ask for help choosing the right one for your application.
A planetary gear arrangement offers a number of advantages over traditional fixed-axis gear system designs. The compact size allows for lower loss of effectiveness, and the more planets in the gear system enhances the torque density and capacity. Another benefit of a planetary gear system is that it is much stronger and more durable than its spur-gear counterpart. Combined with its many advantages, a planetary gear arrangement offers a superior solution to your shifting needs.
Motor

planetary gearboxes as a compact alternative to pinion-and-gear reducers

While traditional pinion-and-gear reducer design is bulky and complex, planetary gearboxes are compact and flexible. They are suitable for many applications, especially where space and weight are issues, as well as torque and speed reduction. However, understanding their mechanism and working isn’t as simple as it sounds, so here are some of the key benefits of planetary gearing.
Planetary gearboxes work by using two planetary gears that rotate around their own axes. The sun gear is used as the input, while the planetary gears are connected via a casing. The ratio of these gears is -Ns/Np, with 24 teeth in the sun gear and -3/2 on the planet gear.
Unlike traditional pinion-and-gear reducer designs, planetary gearboxes are much smaller and less expensive. A planetary gearbox is about 50% smaller and weighs less than a pinion-and-gear reducer. The smaller gear floats on top of three large gears, minimizing the effects of vibration and ensuring consistent transmission over time.
Planetary gearboxes are a good alternative to pinion-and-gear drive systems because they are smaller, less complex and offer a higher reduction ratio. Their meshing arrangement is similar to the Milky Way, with the sun gear in the middle and two or more outer gears. They are connected by a carrier that sets their spacing and incorporates an output shaft.
Compared to pinion-and-gear reduces, planetary gearboxes offer higher speed reduction and torque capacity. As a result, planetary gearboxes are small and compact and are often preferred for space-constrained applications. But what about the high torque transfer? If you’re looking for a compact alt

China manufacturer Best Selling PA Series CNC Machine Servo Drive Planetary Gearbox Reducer   motor engine	China manufacturer Best Selling PA Series CNC Machine Servo Drive Planetary Gearbox Reducer   motor engine
editor by CX 2023-11-14

China Best Sales NEMA 23 57mm Brushless BLDC Planetary Gearbox Reducer Brushless DC Motor with Encoder ac motor

Product Description

 

General Specification:

/General Specification
(Item) (Specification)
Winding type Star
Hall effect angle 120 120 degree electrical angle
Shaft run out 0.571mm
Radial play 0.02mm@450g
End play 0.08mm@450g
Max.radial force 75N @20mm form the flange
Max.axial force 15N
Insulation class Class B
Dielectric strength 500VDC for 1 minute
Insulation resistance 100MΩ Min.,500VDC

Electrical Specification:
 

/Electrical Specification:    
    /Model
Specification Unit JK57BLS005 JK57BLS01 JK57BLS02 JK57BLS03 JK57BLS04
Number Of Phase Phase 3
Number Of Poles Poles 4
Rated Voltage VDC 36
Rated Speed Rpm 4000
Rated Torque N.m 0.055 0.11 0.22 0.33 0.44
Rated Current Amps 1.2 2 3.6 5.3 6.8
Rated Power W 23 46 92 138 184
Peak Torque N.m 0.16 0.33 0.66 1 1.32
Peak Current Amps 3.5 6.8 11.5 15.5 20.5
Back E.M.F V/Krpm 7.8 7.7 7.4 7.3 7.1
Torque Constant N.m/A 0.074 0.073 0.07 0.07 0.068
Rotor Inertia g.c 30 75 119 173 230
Body Length mm 37 47 67 87 107
Weight Kg 0.33 0.44 0.75 1 1.25
Sensor /Honeywell
Insulation Class B
Degree of Protection IP30
Storage Temperature -25~+70ºC
Operating Temperature -15~+50ºC
Working Humidity 85% RH()
Working Environment (),,,,
Altitude 1000

Drawing:
 

 

1. Can you make the gearbox or gearmotor with custom specifications?
YES. We have strong R&D capability, also a great term of engineers, each of them have many work years experience.

2. Do you provide the samples?
YES. Our company can provide the samples to you

3.Do you provide technology support?
YES. Our company have strong R&D capability, we can provide technology support if you need.

4. why should you buy from us not from other suppliers?
Professional one-to-1 motor customized . The world’s large enterprise of choice for high quality suppliers . ISO9001:2008 quality management system certification, through the CE, ROHS certification.

5. How to ship to us?
We will ship the samples to you according to the DHL or UPS or FEDEX etc account you provide.

6. How can I know the product is suitable for me?
Frist, you need to provide us the more details information about the product. We will recommend the item to you according to your requirement of specification. After you confirm, we will prepare the samples to you. also we will offer some good advances according to your product use.

Application: Universal, Household Appliances, Car
Operating Speed: Constant Speed
Excitation Mode: Excited
Function: Control
Casing Protection: Closed Type
Number of Poles: 8
Samples:
US$ 62.50/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

Motor

How to Maximize Gear Motor Reliability

A gearmotor is a mechanical device used to transmit torque from one location to another. As its name implies, it is designed to rotate one object relative to another. Its main use is to transmit torque from one point to another. The most common types of gear motors are: worm, spur, and helical. Each of these has specific functions and can be used for a variety of applications. Reliability is also an important factor to consider when choosing a gearmotor.

Applications of a gear motor

Despite its small size, a gear motor has many applications. These include heavy machinery lifts, hospital beds, and power recliners. It is also found in many everyday products, such as electromechanical clocks and cake mixers. Its versatility allows it to produce a high force from a small electric motor. Here are some of its most common uses. You can also find a gear motor in many household appliances and vehicles.
Before selecting a gearmotor, consider the specifications of the machine you need to power. You should consider its size, weight, and ambient conditions, which include temperature regimes, noise levels, and contaminating sources. You should also take into account the envelope size, mounting method, and orientation. Other considerations include the expected service life, maintenance scope, and control type. The most suitable gearmotor for your specific application will be one that can handle the load.
The motor and gearbox types can be mixed and matched, depending on the application. A three-phase asynchronous motor and a permanent magnet synchronous servomotor are common choices for these devices. The type of motor and gearbox combination you choose will determine the power supply, the efficiency of the motor, and cost. Once you understand the application, it will be easy to integrate a gear motor into your system.
When used in industrial applications, gear motors are effective for reducing the speed of rotating shafts. One third of all industrial electric motor systems use gearing to reduce output speed. They can also save energy, which benefits the workers who operate them. In fact, industrial electric motor systems are responsible for nearly one-tenth of the carbon dioxide emissions that are produced by fossil-fueled power plants. Fortunately, efficiency and reliability are just two of the benefits of using gear motors.

Types

Before choosing a gearmotor, it is important to understand its specifications. The key factors to consider are the size, weight, and noise level of the gearmotor. Additionally, the power, torque, and speed of the motor are important factors. Specifications are also important for its operating environment, such as the temperature and the level of ingress protection. Finally, it is important to determine its duty cycle to ensure it will operate properly. To choose a suitable gearmotor, consult the specifications of your application.
Some common applications of gearmotors include packaging equipment, conveyors, and material handling applications. They also come with several advantages, including their ability to control both position and speed. This makes them ideal for applications where speed and positioning are crucial. Parallel-shaft gear units, for instance, are commonly used in conveyors, material handling, and steel mills. They are also able to operate in high-precision manufacturing. For these reasons, they are the most popular type of gearmotor.
There are three common types of gears. Helical gears have teeth that are inclined at 90 degrees to the axis of rotation, making them more efficient. Helicoidal gears, meanwhile, have a lower noise level and are therefore preferred for applications requiring high torque. Worm gears are preferred for applications where torque and speed reduction are important, and worm gears are suited for those conditions. They also have advantages over spur gears and worm gears.
The application of a gear motor is almost limitless. From heavy machine lifts to hospital bed lifting mechanisms, gear motors make it possible to use a small rotor at a high speed. Their lightweight construction also allows them to move heavy loads, such as cranes, but they do so slowly. Gear motors are an excellent choice in applications where space is an issue. A few common applications are discussed below. When choosing a gear motor, remember to choose the best size and application for your needs.
Motor

Functions

A gearmotor’s speed is directly proportional to the gear ratio. By dividing the input speed by the gear ratio, the output speed can be determined. Gear ratios above one reduce speed, while gear ratios below one increase speed. Efficiency of a gearmotor is defined as its ability to transfer energy through its gearbox. This efficiency factor takes into account losses from friction and slippage. Most gearmotor manufacturers will provide this curve upon request.
There are several factors that must be considered when choosing a gearmotor. First, the application must meet the desired speed and torque. Second, the output shaft must rotate in the desired direction. Third, the load must be properly matched to the gearmotor. Lastly, the operating environment must be considered, including the ambient temperature and the level of protection. These details will help you find the perfect gearmotor. You can compare various types of gear motors on this page and choose the one that will meet your needs.
The micro-DC gear motor is one of the most versatile types of geared motors. These motors are widely used in intelligent automobiles, robotics, logistics, and the smart city. Other applications include precision instruments, personal care tools, and cameras. They are also commonly found in high-end automotives and are used in smart cities. They also find use in many fields including outdoor adventure equipment, photography equipment, and electronics. The benefits of micro-DC gear motors are many.
The main function of a gear motor is to reduce the speed of a rotating shaft. Small electric clocks, for example, use a synchronous motor with a 1,200-rpm output speed to drive the hour, minute, and second hands. While the motor is small, the force it exerts is enormous, so it’s crucial to ensure that the motor isn’t over-powered. There is a high ratio between the input torque and the output torque.

Reliability

The reliability of a gear motor is dependent on a number of factors, including material quality, machining accuracy, and operating conditions. Gear failure is often more serious than surface fatigue, and can compromise personal safety. Reliability is also affected by the conditions of installation, assembly, and usage. The following sections provide an overview of some important factors that impact gear motor reliability. This article provides some tips to maximize gear motor reliability.
First and foremost, make sure you’re buying from a reliable supplier. Gear motors are expensive, and there is no standardization of the sizes. If a gear breaks, replacing it can take a lot of time. In the long run, reliability wins over anything. But this doesn’t mean that you can ignore the importance of gears – the quality of a gear motor is more important than how long it lasts.
Motor

Cost

The cost of a gear motor is relatively low compared to that of other forms of electric motors. This type of motor is commonly used in money counters, printers, smart homes, and automation equipment. A DC gear motor is also commonly used in automatic window machines, glass curtain walls, and banknote vending machines. There are many advantages to using a gear motor. Here are a few of them. Read on to learn more about them.
Speed management is another benefit of a gear motor. The motors tend to have less wear and tear than other motors, which means less frequent replacements. Additionally, many gear motors are easy to install and require less maintenance, which also helps reduce the overall cost of ownership. Lastly, because noise is a common concern for many electronic OEMs, DC gear motors are often quieter than their counterparts. For these reasons, they are often used in industrial settings.
Another advantage of an electric gear motor is its size and power. They are typically designed for 12V, 24V, and 48V voltages and 200-watt power. Their rated speed is 3000 rpm and their torque is 0.64 Nm. They are also more reliable than their AC counterparts and are ideal for many industrial applications. They have a high ratio of three to two, which makes them ideal for a variety of applications.
A gear motor is an electric motor that is coupled with a gear train. It uses AC or DC power, and is often called a gear reducer. The main purpose of these gear reducers is to multiply torque, while maintaining compact size and overall efficiency. However, the efficiency of a gear motor is also affected by ambient temperature and lubricants. If the gear motor is installed in the wrong location, it may be ineffective and result in premature failure of the machine.

China Best Sales NEMA 23 57mm Brushless BLDC Planetary Gearbox Reducer Brushless DC Motor with Encoder   ac motor	China Best Sales NEMA 23 57mm Brushless BLDC Planetary Gearbox Reducer Brushless DC Motor with Encoder   ac motor
editor by CX 2023-05-06

China RMD-X6 S2 Gear Ratio 136 Delicate Planetary Reducer Pancake Motor Magnetic Brushless Outrunner Actuator BLDC Gear Motor car motor

Guarantee: 3months-1year
Model Amount: RMD-X6 S2 V2
Utilization: Automobile, Admirer
Type: SERVO MOTOR
Torque: 18N.M
Design: Everlasting Magnet
Commutation: Brushless
Safeguard Function: Water-proof
Pace(RPM): 70rpm
Constant Existing(A): 2.6A
Effectiveness: Ie three
Motor kind: Brushless dc servo motor
Input voltage(V): 24v~48v
Velocity continuous(rpm/v): 135rpm/v
Reducer ratio: 36:1
Normminal electrical power(W): 300W
Endcoder: 16-bit magnetic encoder
Conversation: CAN BUS/RS485
Bodyweight: 600g
Customise: Satisfactory
Certification: ce
Packaging Information: carton

Firm InformationCompany InformationABOUT US CUITUREHangZhou Micro Actuator Technologies Co., Ltd. was set up in August 2571. The company is located in Huaqiao, HangZhou which nearby ZheJiang . The firm manufacturer is MyActuator. MyActuator is an integrated business specializing in the layout, simulation, study and growth, assembly and product sales of robotic actuators and management techniques.
The company’s solution matrix is rich, with 5 collection of hundreds of merchandise. Such as RMD sequence servo motors, GF sequence high-velocity motors, GB sequence motors, UAV electrical power kits, DRC motorists, etc. The firm’s products have received internationally recognized CE and RoHS certificates, and the business plans to declare 7 patents in 2571. In 2571, the organization strategies to apply for large-tech enterprises.
Our items are broadly employed in mobile moveable robots, exoskeleton robots, quadruped robots, small robotic arms, AGV, AC220V 14W gear motor AC motor 60KTYZ long term magnet synchronous motor Gimbal, and so on. The products are not only nicely recommanded by domestic consumers, but also exported to a lot more than twenty nations around the world close to the planet these kinds of as the United States, Europe, Australia, Japan, South Korea, and Singapore. And in-depth cooperation with the Metropolis University of New York, the University of Science and Technological innovation of China, ZheJiang Tongji University, HangZhou Institute of Engineering, and so forth.
We are fully commited to offering a lot more productive and stable servo actuators for much more clever technology businesses, concentrating on the miniaturized and smart robot subdivision subject, and serving the robot period that has occur.
Our Benefits

one.MyActuator is an integrated business specializing in the
design, simulation, investigation and advancement, assembly
and income of robotic actuators and manage techniques
two.Exported to a lot more than 20 international locations around the planet this sort of
as the United States, Europe, Australia, Japan, South
Korea, Long term magnet DC motor BM1424HQF-14A-2200W60V72V differential motor and Singapore
three.Fast dispatch: Most of the merchandise are in stock,OEM orders
can be recognized, which can satisfy the diverse requirements of customers
Certifications
Packaging & ShippingPACKAGE:Standard export carton packing.
FAQ1) How prolonged is your shipping and delivery time?Usually 5-7days for sample 25-30days for mass purchase and 45-50days for customise goods .Of system ,the exact lead time depands on vary undertaking.
two) What is your conditions of payment?We settle for paypal, T/T and L/C Payment=1000USD, 30% in progress ,stability ahead of shippment.
3) Do you give free of charge sample?It depands.If we have extended expression cooperation and you have positioned formal buy ,we can provide new merchandise sample for checks.
four) What sort of goods you provide?We mainly give long term magnet brushed dc motors(BLDC and PMSM) and motor push technique.
five) Can you accept OEM and ODM get what about MOQ?Sure ,we acknowledge OEM or ODM ( including motor and drive system customize)MOQ depands on requests. For case in point,just change symbol and motor winding ,MOQ only 50pcsif adjust computer software or motor construction MOQ no significantly less than 500pcs.
6) Do you have program to develop agent?We welcome specialist and experienced establishments to distribute our items, 24V 12V DC Motor 120w Worm Wheel Geared Rechargeable Underwater Substantial Torque Gear 12 Volt Motor we will offer you with excellent earnings margin and thorough help.

How to Select a Gear Motor

A gearmotor is an electrical machine that transfers energy from one place to another. There are many types of gearmotors. This article will discuss the types of gearmotors, including Angular geared motors, Planetary gearboxes, Hydraulic gear motors, and Croise motors. In addition to its uses, gearmotors have many different characteristics. In addition, each type has distinct advantages and disadvantages. Listed below are a few tips on selecting a gearmotor.

Angular geared motors

Angular geared motors are the optimum drive element for applications where torques, forces, and motions need to be transferred at an angle. Compared to other types of geared motors, these have few moving parts, a compact design, and a long life. Angular geared motors are also highly efficient in travel drive applications. In addition to their durability, they have a low maintenance requirement and are highly corrosion-resistant.
Helical worm geared motors are a low-cost solution for drives that employ angular geared motors. They combine a worm gear stage and helical input stage to offer higher efficiency than pure worm geared motors. This drive solution is highly reliable and noise-free. Angular geared motors are often used in applications where noise is an issue, and helical worm geared motors are particularly quiet.
The gear ratio of an angular geared motor depends on the ratio between its input and output shaft. A high-quality helical geared motor has a relatively low mechanical noise level, and can be installed in almost any space. The torque of a helical geared motor can be measured by using frequency measurement equipment. The energy efficiency of angular geared motors is one of the most important factors when choosing a motor. Its symmetrical arrangement also allows it to operate in low-speed environments.
When selecting the right angular geared motor, it is important to keep in mind that increased torque will lead to poor output performance. Once a gear motor reaches its stall torque, it will no longer function properly. This makes it important to consult a performance curve to choose the appropriate motor. Most DC motor manufacturers are more than happy to provide these to customers upon request. Angular geared motors are more expensive than conventional worm gear motors.
Motor

Planetary gearboxes

Planetary gearboxes are used in industrial machinery to generate higher torque and power density. There are three main types of planetary gearboxes: double stage, triple stage, and multistage. The central sun gear transfers torque to a group of planetary gears, while the outer ring and spindle provide drive to the motor. The design of planetary gearboxes delivers up to 97% of the power input.
The compact size of planetary gears results in excellent heat dissipation. In some applications, lubrication is necessary to improve durability. Nevertheless, if you are looking for high speed transmission, you should consider the additional features, such as low noise, corrosion resistance, and construction. Some constructors are better than others. Some are quick to respond, while others are unable to ship their products in a timely fashion.
The main benefit of a planetary gearbox is its compact design. Its lightweight design makes it easy to install, and the efficiency of planetary gearboxes is up to 0.98%. Another benefit of planetary gearboxes is their high torque capacity. These gearboxes are also able to work in applications with limited space. Most modern automatic transmissions in the automotive industry use planetary gears.
In addition to being low in cost, planetary gearboxes are a great choice for many applications. Neugart offers both compact and right angle versions. The right angle design offers a high power-to-weight ratio, making it ideal for applications where torque is needed to be transmitted in reverse mode. So if you’re looking for an efficient way to move heavy machinery around, planetary gearboxes can be a great choice.
Another advantage of planetary gearboxes is their ability to be easily and rapidly changed from one application to another. Since planetary gears are designed to be flexible, you don’t have to buy new ones if you need to change gear ratios. You can also use planetary gears in different industries and save on safety stock by sharing common parts. These gears are able to withstand high shock loads and demanding conditions.
Motor

Hydraulic gear motors

Hydraulic gear motors are driven by oil that is pumped into a gear box and causes the gears to rotate. This method of energy production is quiet and inexpensive. The main drawbacks of hydraulic gear motors are that they are noisy and inefficient at low speeds. The other two types of hydraulic motors are piston and vane-type hydraulic motors. The following are some common benefits of hydraulic gear motors.
A hydraulic gear motor is composed of two gears – a driven gear and an idler. The driven gear is attached to the output shaft via a key. High-pressure oil flows into the housing between the gear tips and the motor housing, and the oil then exits through an outlet port. Unlike a conventional gear motor, the gears mesh to prevent the oil from flowing backward. As a result, they are an excellent choice for agricultural and industrial applications.
The most common hydraulic gear motors feature a gerotor and a drive gear. These gears mesh with a larger gear to produce rotation. There are also three basic variations of gear motors: roller-gerotor, gerotor, and differential. The latter produces higher torque and less friction than the previous two. These differences make it difficult to choose which type is the best for your needs. A high-performance gear motor will last longer than an ordinary one.
Radial piston hydraulic motors operate in the opposite direction to the reciprocating shaft of an electric gearmotor. They have nine pistons arranged around a common center line. Fluid pressure causes the pistons to reciprocate, and when they are stationary, the pistons push the fluid out and move back in. Because of the high pressure created by the fluid, they can rotate at speeds up to 25,000RPM. In addition, hydraulic gear motors are highly efficient, allowing them to be used in a wide range of industrial and commercial applications.
Hydraulic gear motors complement hydraulic pumps and motors. They are also available in reversible models. To choose the right hydraulic motor for your project, take time to gather all the necessary information about the installation process. Some types require specialized expertise or complicated installation. Also, there are some differences between closed and open-loop hydraulic motors. Make sure to discuss the options with a professional before you make a decision.
Motor

Croise motors

There are many advantages to choosing a Croise gear motor. It is highly compact, with less weight and space than standard motors. Its right-angle shaft and worm gear provide smooth, quiet operation. A silent-type brake ensures no metallic sound during operation. It also offers excellent positioning accuracy and shock resistance. This is why this motor is ideal for high-frequency applications. Let’s take a closer look.
A properly matched gearmotor will provide maximum torque output in a specified period. Its maximum developing torque is typically the rated output torque. A one-twelfth-horsepower (1/8 horsepower) motor can meet torque requirements of six inch-pounds, without exceeding its breakdown rating. This lower-cost unit allows for production variations and allows the customer to use a less powerful motor. Croise gear motors are available in a variety of styles.

China RMD-X6 S2 Gear Ratio 136 Delicate Planetary Reducer Pancake Motor Magnetic Brushless Outrunner Actuator BLDC Gear Motor     car motor		China RMD-X6 S2 Gear Ratio 136 Delicate Planetary Reducer Pancake Motor Magnetic Brushless Outrunner Actuator BLDC Gear Motor     car motor
editor by czh 2023-02-20

China NEMA 23 57mm 24V 36V 48V BLDC Planetary Gear Reducer Brushless DC Motor Electrical Motor for Service Robots motor driver

Product Description

NEMA 23 BLDC Motor

 

Standard Specification:

/Basic Specification
(Item) (Specification)
Winding sort Star
Hall impact angle one hundred twenty one hundred twenty degree electrical angle
Shaft operate out .571mm
Radial play .02mm@450g
Finish engage in .08mm@450g
Max.radial force 75N @20mm sort the flange
Max.axial pressure 15N
Insulation course Class B
Dielectric power 500VDC for 1 moment
Insulation resistance 100MΩ Min.,500VDC

Electrical Specification:
 

/Electrical Specification:    
    /Design
Specification Device JK57BLS005 JK57BLS01 JK57BLS02 JK57BLS03 JK57BLS04
Quantity Of Phase Section 3
Quantity Of Poles Poles 4
Rated Voltage VDC 36
Rated Speed Rpm 4000
Rated Torque N.m .055 .eleven .22 .33 .44
Rated Recent Amps 1.two two 3.six five.3 6.8
Rated Electrical power W 23 forty six 92 138 184
Peak Torque N.m .sixteen .33 .66 1 1.32
Peak Existing Amps 3.five 6.8 eleven.five 15.5 20.five
Back E.M.F V/Krpm seven.eight seven.7 seven.4 7.3 7.1
Torque Continuous N.m/A .074 .073 .07 .07 .068
Rotor Inertia g.c 30 75 119 173 230
Human body Length mm 37 47 67 87 107
Fat Kg .33 .forty four .75 1 1.twenty five
Sensor /Honeywell
Insulation Course B
Diploma of Security IP30
Storage Temperature -25~+70ºC
Operating Temperature -fifteen~+50ºC
Working Humidity 85% RH()
Doing work Surroundings (),,,,
Altitude 1000

Drawing:
 

 

one. who are we?

We are primarily based in ZheJiang , China, begin from 2011,promote to Domestic Marketplace(26.00%),Western Europe(20.00%),North
The usa(twenty.00%),Northern Europe(10.00%),Jap Europe(7.00%),Africa(5.00%),Southeast Asia(5.00%),Mid East(5.00%),South The united states(2.00%). There are overall about 51-one hundred men and women in our workplace.

two. how can we guarantee top quality?

We are based in ZheJiang , China, begin from 2011,promote to Domestic Market(26.00%),Western Europe(twenty.00%),North
America(twenty.00%),Northern Europe(10.00%),Eastern Europe(7.00%),Africa(5.00%),Southeast Asia(5.00%),Mid East(5.00%),South The us(2.00%). There are whole about 51-one hundred people in our place of work.

three.what can you buy from us?

Constantly a pre-production sample just before mass manufacturing
Often closing Inspection ahead of cargo

four. why should you acquire from us not from other suppliers?

Professional one-to-1 motor customized . The world’s huge organization of choice for large quality suppliers . ISO9001:2008 quality management method certification, by way of the CE, ROHS certification.

five. what solutions can we offer?

Recognized Delivery Terms: FOB,CFR,CIF,EXW,CIP,FCA,CPT,DDP,DDU,Specific Shipping and delivery,DAF,DES
Accepted Payment Forex:USD,EUR,CAD,HKD,GBP,CNY
Acknowledged Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit rating Card,PayPal,Western Union,Income,Escrow
Language Spoken:English,Chinese

Application: Universal, Household Appliances, Car
Operating Speed: Constant Speed
Excitation Mode: Excited
Function: Control
Casing Protection: Closed Type
Number of Poles: 8

###

Samples:
US$ 60/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

/General Specification
(Item) (Specification)
Winding type Star
Hall effect angle 120 120 degree electrical angle
Shaft run out 0.025mm
Radial play 0.02mm@450g
End play 0.08mm@450g
Max.radial force 75N @20mm form the flange
Max.axial force 15N
Insulation class Class B
Dielectric strength 500VDC for one minute
Insulation resistance 100MΩ Min.,500VDC

###

/Electrical Specification:    
    /Model
Specification Unit JK57BLS005 JK57BLS01 JK57BLS02 JK57BLS03 JK57BLS04
Number Of Phase Phase 3
Number Of Poles Poles 4
Rated Voltage VDC 36
Rated Speed Rpm 4000
Rated Torque N.m 0.055 0.11 0.22 0.33 0.44
Rated Current Amps 1.2 2 3.6 5.3 6.8
Rated Power W 23 46 92 138 184
Peak Torque N.m 0.16 0.33 0.66 1 1.32
Peak Current Amps 3.5 6.8 11.5 15.5 20.5
Back E.M.F V/Krpm 7.8 7.7 7.4 7.3 7.1
Torque Constant N.m/A 0.074 0.073 0.07 0.07 0.068
Rotor Inertia g.c 30 75 119 173 230
Body Length mm 37 47 67 87 107
Weight Kg 0.33 0.44 0.75 1 1.25
Sensor /Honeywell
Insulation Class B
Degree of Protection IP30
Storage Temperature -25~+70ºC
Operating Temperature -15~+50ºC
Working Humidity 85% RH()
Working Environment (),,,,
Altitude 1000
Application: Universal, Household Appliances, Car
Operating Speed: Constant Speed
Excitation Mode: Excited
Function: Control
Casing Protection: Closed Type
Number of Poles: 8

###

Samples:
US$ 60/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

/General Specification
(Item) (Specification)
Winding type Star
Hall effect angle 120 120 degree electrical angle
Shaft run out 0.025mm
Radial play 0.02mm@450g
End play 0.08mm@450g
Max.radial force 75N @20mm form the flange
Max.axial force 15N
Insulation class Class B
Dielectric strength 500VDC for one minute
Insulation resistance 100MΩ Min.,500VDC

###

/Electrical Specification:    
    /Model
Specification Unit JK57BLS005 JK57BLS01 JK57BLS02 JK57BLS03 JK57BLS04
Number Of Phase Phase 3
Number Of Poles Poles 4
Rated Voltage VDC 36
Rated Speed Rpm 4000
Rated Torque N.m 0.055 0.11 0.22 0.33 0.44
Rated Current Amps 1.2 2 3.6 5.3 6.8
Rated Power W 23 46 92 138 184
Peak Torque N.m 0.16 0.33 0.66 1 1.32
Peak Current Amps 3.5 6.8 11.5 15.5 20.5
Back E.M.F V/Krpm 7.8 7.7 7.4 7.3 7.1
Torque Constant N.m/A 0.074 0.073 0.07 0.07 0.068
Rotor Inertia g.c 30 75 119 173 230
Body Length mm 37 47 67 87 107
Weight Kg 0.33 0.44 0.75 1 1.25
Sensor /Honeywell
Insulation Class B
Degree of Protection IP30
Storage Temperature -25~+70ºC
Operating Temperature -15~+50ºC
Working Humidity 85% RH()
Working Environment (),,,,
Altitude 1000

What Is a Gear Motor?

A gear motor is an electric motor coupled with a gear train. It uses either DC or AC power to achieve its purpose. The primary benefit of a gear reducer is its ability to multiply torque while maintaining a compact size. The trade-off of this additional torque comes in the form of a reduced output shaft speed and overall efficiency. However, proper gear technology and ratios provide optimum output and speed profiles. This type of motor unlocks the full potential of OEM equipment.

Inertial load

Inertial load on a gear motor is the amount of force a rotating device produces due to its inverse square relationship with its inertia. The greater the inertia, the less torque can be produced by the gear motor. However, if the inertia is too high, it can cause problems with positioning, settling time, and controlling torque and velocity. Gear ratios should be selected for optimal power transfer.
The duration of acceleration and braking time of a gear motor depends on the type of driven load. An inertia load requires longer acceleration time whereas a friction load requires breakaway torque to start the load and maintain it at its desired speed. Too short a time period can cause excessive gear loading and may result in damaged gears. A safe approach is to disconnect the load when power is disconnected to prevent inertia from driving back through the output shaft.
Inertia is a fundamental concept in the design of motors and drive systems. The ratio of mass and inertia of a load to a motor determines how well the motor can control its speed during acceleration or deceleration. The mass moment of inertia, also called rotational inertia, is dependent on the mass, geometry, and center of mass of an object.
Motor

Applications

There are many applications of gear motors. They provide a powerful yet efficient means of speed and torque control. They can be either AC or DC, and the two most common motor types are the three-phase asynchronous and the permanent magnet synchronous servomotor. The type of motor used for a given application will determine its cost, reliability, and complexity. Gear motors are typically used in applications where high torque is required and space or power constraints are significant.
There are two types of gear motors. Depending on the ratio, each gear has an output shaft and an input shaft. Gear motors use hydraulic pressure to produce torque. The pressure builds on one side of the motor until it generates enough torque to power a rotating load. This type of motors is not recommended for applications where load reversals occur, as the holding torque will diminish with age and shaft vibration. However, it can be used for precision applications.
The market landscape shows the competitive environment of the gear motor industry. This report also highlights key items, income and value creation by region and country. The report also examines the competitive landscape by region, including the United States, China, India, the GCC, South Africa, Brazil, and the rest of the world. It is important to note that the report contains segment-specific information, so that readers can easily understand the market potential of the geared motors market.

Size

The safety factor, or SF, of a gear motor is an important consideration when selecting one for a particular application. It compensates for the stresses placed on the gearing and enables it to run at maximum efficiency. Manufacturers provide tables detailing typical applications, with multiplication factors for duty. A gear motor with a SF of three or more is suitable for difficult applications, while a gearmotor with a SF of one or two is suitable for relatively easy applications.
The global gear motor market is highly fragmented, with numerous small players catering to various end-use industries. The report identifies various industry trends and provides comprehensive information on the market. It outlines historical data and offers valuable insights on the industry. The report also employs several methodologies and approaches to analyze the market. In addition to providing historical data, it includes detailed information by market segment. In-depth analysis of market segments is provided to help identify which technologies will be most suitable for which applications.
Motor

Cost

A gear motor is an electric motor that is paired with a gear train. They are available in AC or DC power systems. Compared to conventional motors, gear reducers can maximize torque while maintaining compact dimensions. But the trade-off is the reduced output shaft speed and overall efficiency. However, when used correctly, a gear motor can produce optimal output and mechanical fit. To understand how a gear motor works, let’s look at two types: right-angle geared motors and inline geared motors. The first two types are usually used in automation equipment and in agricultural and medical applications. The latter type is designed for rugged applications.
In addition to its efficiency, DC gear motors are space-saving and have low energy consumption. They can be used in a number of applications including money counters and printers. Automatic window machines and curtains, glass curtain walls, and banknote vending machines are some of the other major applications of these motors. They can cost up to 10 horsepower, which is a lot for an industrial machine. However, these are not all-out expensive.
Electric gear motors are versatile and widely used. However, they do not work well in applications requiring high shaft speed and torque. Examples of these include conveyor drives, frozen beverage machines, and medical tools. These applications require high shaft speed, so gear motors are not ideal for these applications. However, if noise and other problems are not a concern, a motor-only solution may be the better choice. This way, you can use a single motor for multiple applications.
Motor

Maintenance

Geared motors are among the most common equipment used for drive trains. Proper maintenance can prevent damage and maximize their efficiency. A guide to gear motor maintenance is available from WEG. To prevent further damage, follow these maintenance steps:
Regularly check electrical connections. Check for loose connections and torque them to the recommended values. Also, check the contacts and relays to make sure they are not tangled or damaged. Check the environment around the gear motor to prevent dust from clogging the passageway of electric current. A proper maintenance plan will help you identify problems and extend their life. The manual will also tell you about any problems with the gearmotor. However, this is not enough – it is important to check the condition of the gearbox and its parts.
Conduct visual inspection. The purpose of visual inspection is to note any irregularities that may indicate possible problems with the gear motor. A dirty motor may be an indication of a rough environment and a lot of problems. You can also perform a smell test. If you can smell a burned odor coming from the windings, there may be an overheating problem. Overheating can cause the windings to burn and damage.
Reactive maintenance is the most common method of motor maintenance. In this type of maintenance, you only perform repairs if the motor stops working due to a malfunction. Regular inspection is necessary to avoid unexpected motor failures. By using a logbook to document motor operations, you can determine when it is time to replace the gear motor. In contrast to preventive maintenance, reactive maintenance requires no regular tests or services. However, it is recommended to perform inspections every six months.

China NEMA 23 57mm 24V 36V 48V BLDC Planetary Gear Reducer Brushless DC Motor Electrical Motor for Service Robots     motor driver	China NEMA 23 57mm 24V 36V 48V BLDC Planetary Gear Reducer Brushless DC Motor Electrical Motor for Service Robots     motor driver
editor by czh 2023-01-25

China Electric Worm Reducer Motor with Planetary Gearbox with Great quality

Solution Description

Underneath are only some normal designs, for much more specification or a customed motor, pls get in touch with us.

24ZYJ DC Worm Gear Motor
Basic Data
Item Data
Tem Rise 40K
Working Tem (-20ºC~+80ºC)
Insulation Resistance 100MΩ min  500VDC
Surge Examination 500VAC for 1min
Insulation Class E
Weight 120g

The specification of Electric worm reducer motor with planetary gearbox

Specification
PN Rated Voltage Preliminary Pace Ratio Power Noload Speed Noload Existing Rated Speed Rated Recent Rated Torque Stall Torque Stall Present
V DC rpm 1:xxx W rpm mA rpm mA Kg.cm Kg.cm mA
24ZYJ4632-65A twelve 6500 a hundred three sixty five eighty fifty two hundred .75 2 one thousand
24ZYJ4632-28A twelve 5000 180 three 28 80 23 200 one.six three one thousand
24ZYJ4632-38A twelve 9500 250 three 38 one hundred 33 250 2.six 5 1500

The drawing of Electric worm reducer motor with planetary gearbox

About our firm
Probond motors types brush, brushless, stepper, hysteresis and linear motors to satisfy buyers needs. 

Our motors use normal and special parts with consumer selected torque/velocity demands that can be modified to your purposes.

Probond motor owns expert product sales staff and engineer group with more than 10 several years expertise in motor market, primarily based on China mainland managing overseas company for years, we know your requirements much better than other individuals. 

Probond Sonicare Toothbrush Motor and Thermostatic Valve Hysteresis Motor are our very hot merchandise on promote in 2017 with highly top quality level and aggressive price tag. 

Conditions of Trade

Terms of price FOB,CIF,CFR,EXW,DDP,and so on.
Terms of payment one hundred% T/T in advance for samples
Bulk quantity payment way can be negotited
Guarantee 12 months limited warranty once the items are delivered to the buyer.
Lead time Usually within 2 weeks for trial orders, within 3 weeks for bulk orders.
Bundle Carton o plywood pallet.
Place of loading ZheJiang , HangZhou, etc.
Shipment carrier Items are usually shipped via Fedex,DHL, TNT,UPS,EMS
for trial orders and via vessel for bulk orders.
Delivery time Usually within 5 working days by Express                         fifteen-30 working days by vessel

Our assure to our Buyers:
1.  Reply customer’s inquiry in 2 working times.
2.  Reply to our client concerns & Worries inside 3 operating times.
three.  Admit Consumer purchase orders in 24 hours.

Contact 

 

Application: Universal, Industrial, Household Appliances, Car, Power Tools, Beauty Equipments
Operating Speed: High Speed
Excitation Mode: Excited
Function: Control, Driving
Casing Protection: Open Type
Number of Poles: 6

###

Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

24ZYJ DC Worm Gear Motor
Basic Info
Item Data
Tem Rise 40K
Working Tem (-20ºC~+80ºC)
Insulation Resistance 100MΩ min  500VDC
Surge Test 500VAC for 1min
Insulation Class E
Weight 120g

###

Specification
PN Rated Voltage Initial Speed Ratio Power Noload Speed Noload Current Rated Speed Rated Current Rated Torque Stall Torque Stall Current
V DC rpm 1:xxx W rpm mA rpm mA Kg.cm Kg.cm mA
24ZYJ4632-65A 12 6500 100 3 65 80 50 200 0.75 2 1000
24ZYJ4632-28A 12 5000 180 3 28 80 23 200 1.6 3 1000
24ZYJ4632-38A 12 9500 250 3 38 100 33 250 2.6 5 1500

###

Terms of price FOB,CIF,CFR,EXW,DDP,etc.
Terms of payment 100% T/T in advance for samples
Bulk quantity payment way can be negotited
Warranty 12 months limited warranty once the items are delivered to the buyer.
Lead time Usually within 2 weeks for trial orders, within 3 weeks for bulk orders.
Package Carton o plywood pallet.
Place of loading Shanghai, Ningbo, etc.
Shipment carrier Items are usually shipped via Fedex,DHL, TNT,UPS,EMS
for trial orders and via vessel for bulk orders.
Delivery time Usually within 5 working days by Express                         15-30 working days by vessel
Application: Universal, Industrial, Household Appliances, Car, Power Tools, Beauty Equipments
Operating Speed: High Speed
Excitation Mode: Excited
Function: Control, Driving
Casing Protection: Open Type
Number of Poles: 6

###

Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

24ZYJ DC Worm Gear Motor
Basic Info
Item Data
Tem Rise 40K
Working Tem (-20ºC~+80ºC)
Insulation Resistance 100MΩ min  500VDC
Surge Test 500VAC for 1min
Insulation Class E
Weight 120g

###

Specification
PN Rated Voltage Initial Speed Ratio Power Noload Speed Noload Current Rated Speed Rated Current Rated Torque Stall Torque Stall Current
V DC rpm 1:xxx W rpm mA rpm mA Kg.cm Kg.cm mA
24ZYJ4632-65A 12 6500 100 3 65 80 50 200 0.75 2 1000
24ZYJ4632-28A 12 5000 180 3 28 80 23 200 1.6 3 1000
24ZYJ4632-38A 12 9500 250 3 38 100 33 250 2.6 5 1500

###

Terms of price FOB,CIF,CFR,EXW,DDP,etc.
Terms of payment 100% T/T in advance for samples
Bulk quantity payment way can be negotited
Warranty 12 months limited warranty once the items are delivered to the buyer.
Lead time Usually within 2 weeks for trial orders, within 3 weeks for bulk orders.
Package Carton o plywood pallet.
Place of loading Shanghai, Ningbo, etc.
Shipment carrier Items are usually shipped via Fedex,DHL, TNT,UPS,EMS
for trial orders and via vessel for bulk orders.
Delivery time Usually within 5 working days by Express                         15-30 working days by vessel

How to Assemble a Planetary Motor

A Planetary Motor uses multiple planetary surfaces to produce torque and rotational speed. The planetary system allows for a wide range of gear reductions. Planetary systems are particularly effective in applications where higher torques and torque density are needed. As such, they are a popular choice for electric vehicles and other applications where high-speed mobility is required. Nevertheless, there are many benefits associated with using a planetary motor. Read on to learn more about these motors.

VPLite

If you’re looking to replace the original VP, the VPLite has a similar output shaft as the original. This means that you can mix and match your original gear sets, including the input and output shafts. You can even mix metal inputs with plastic outputs. Moreover, if you decide to replace the gearbox, you can easily disassemble the entire unit and replace it with a new one without losing any output torque.
Compared to a planetary motor, a spur gear motor uses fewer gears and is therefore cheaper to produce. However, the latter isn’t suitable for high-torque applications. The torque produced by a planetary gearmotor is evenly distributed, which makes it ideal for applications that require higher torque. However, you may have to compromise on the torque output if you’re looking for a lightweight option.
The VersaPlanetary Lite gearbox replaces the aluminum ring gear with a 30% glass-filled nylon gear. This gearbox is available in two sizes, which means you can mix and match parts to get a better gear ratio. The VPLite gearbox also has a female 5mm hex output shaft. You can mix and match different gearboxes and planetary gearboxes for maximum efficiency.
Motor

VersaPlanetary

The VersaPlanetary is a highly versatile planetary motor that can be mounted in a variety of ways. Its unique design includes a removable shaft coupler system that makes it simple to swap out the motor with another. This planetary motor mounts in any position where a CIM motor mounts. Here’s how to assemble the motor. First, remove the hex output shaft from the VersaPlanetary output stage. Its single ring clip holds it in place. You can use a drill press to drill a hole into the output shaft.
After mounting the gearbox, you can then mount the motor. The mounting hardware included with the VersaPlanetary Planetary Motor comes with four 10-32 threaded holes on a two-inch bolt circle. You can use these holes to mount your VersaPlanetary on a CIM motor or a CIM-compatible motor. Once assembled, the VersaPlanetary gearbox has 72 different gear ratios.
The VersaPlanetary gearbox is interchangeable with regular planetary gearboxes. However, it does require additional parts. You can purchase a gearbox without the motor but you’ll need a pinion. The pinion attaches to the shaft of the motor. The gearbox is very sturdy and durable, so you won’t have to worry about it breaking or wearing out.

Self-centering planetary gears

A planetary motor is a simple mechanical device that rotates around a axis, with the planets moving around the shaft in a radial direction. The planets are positioned so that they mesh with both the sun gear and the output gears. The carrier 48 is flexibly connected to the drive shaft and can move depending on the forces exerted by the planet gears. In this way, the planets can always be in the optimal mesh with the output gears and sun gear.
The first step in developing a planetary gear motor is to identify the number of teeth in each planet. The number of teeth should be an integer. The tooth diameters of the planets should mesh with each other and the ring. Typically, the teeth of one planet must mesh with each other, but the spacing between them must be equal or greater than the other. This can be achieved by considering the tooth count of each planet, as well as the spacing between planets.
A second step is to align the planet gears with the output gears. In a planetary motor, self-centering planetary gears must be aligned with both input and output gears to provide maximum torque. For this to be possible, the planet gears must be connected with the output shaft and the input shaft. Similarly, the output shaft should also be able to align with the input gear.
Motor

Encoders

A planetary geared motor is a DC motor with a planetary gearbox. The motor can be used to drive heavy loads and has a ratio of 104:1. The shaft speed is 116rpm when it is unloaded. A planetary gearbox has a low backlash and is often used in applications that need high torque. Planetary Motor encoders can help you keep track of your robot’s position or speed.
They are also able to control motor position and speed with precision. Most of them feature high resolution. A 0.18-degree resolution encoder will give you a minimum of 2000 transitions per rotation between outputs A and B. The encoder is built to industrial standards and has a sturdy gearbox to avoid damage. The encoder’s robust design means it will not stall when the motor reaches its maximum speed.
There are many advantages to a planetary motor encoder. A high-quality one will not lose its position or speed even if it’s subject to shocks. A good quality planetary motor will also last a long time. Planetary motors are great for resale or for your own project. If you’re considering buying a planetary motor, consider this information. It’ll help you decide if a particular model is right for your needs.

Cost

There are several advantages of planetary motors. One of the biggest is their cost, but they can also be used in many different applications. They can be combined with a variety of gearboxes, and are ideal for various types of robots, laboratory automation, and production applications. Planetary gearboxes are available in many different materials, and plastic planetary gearboxes are an economical alternative. Plastic gearboxes reduce noise at higher speeds, and steel input stage gears are available for high torques. A modified lubrication system can help with difficult operating conditions.
In addition to being more durable, planetary motors are much more efficient. They use fewer gears, which lowers the overall cost of production. Depending on the application, a planetary motor can be used to move a heavy object, but is generally less expensive than its counterpart. It is a better choice for situations where the load is relatively low and the motor is not used frequently. If you need a very high torque output, a planetary motor may be the better option.
Planetary gear units are a good choice for applications requiring high precision, high dynamics, and high torque density. They can be designed and built using TwinCAT and TC Motion Designer, and are delivered as complete motor and gear unit assemblies. In a few simple steps, you can calculate the torque required and compare the costs of different planetary gear units. You can then choose the best model for your application. And because planetary gear units are so efficient, they are a great option for high-end industrial applications.
Motor

Applications

There are several different applications of the planetary motor. One such application is in motion control. Planetary gearboxes have many benefits, including high torque, low backlash, and torsional stiffness. They also have an extremely compact design, and can be used for a variety of applications, from rack and pinion drives to delta robotics. In many cases, they are less expensive to manufacture and use than other types of motors.
Another application for planetary gear units is in rotary tables. These machines require high precision and low backlash for their precise positioning. Planetary gears are also necessary for noise reduction, which is a common feature in rotary tables. High precision planetary gears can make the height adjustment of OP tables a breeze. And because they are extremely durable and require low noise, they are a great choice for this application. In this case, the planetary gear is matched with an AM8000 series servomotor, which gives a wide range of choices.
The planetary gear transmission is also widely used in helicopters, automobiles, and marine applications. It is more advanced than a countershaft drive, and is capable of higher torque to weight ratios. Other advantages include its compact design and reduced noise. A key concern in the development of this type of transmission is to minimize vibration. If the output of a planetary gear transmission system is loud, the vibration caused by this type of drive system may be too loud for comfort.

China Electric Worm Reducer Motor with Planetary Gearbox     with Great qualityChina Electric Worm Reducer Motor with Planetary Gearbox     with Great quality
editor by czh 2023-01-21

China 24mm 12V DC Planetary Gear Motor Reducer motor efficiency

Merchandise Description

We are a professional manufacturer for micro DC motor, our goods include carbon brush motor, steel brush motor, brushless motor, stepper motor. We received ISO9001, TS16949 certificate, if you have any enquiry, remember to come to feel cost-free to get in touch with me.

 

US $0.2
/ Piece
|
1,000 Pieces

(Min. Order)

###

Application: Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed: High Speed
Excitation Mode: Shunt
Function: Control, Driving
Casing Protection: Protection Type
Number of Poles: 10

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
US $0.2
/ Piece
|
1,000 Pieces

(Min. Order)

###

Application: Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed: High Speed
Excitation Mode: Shunt
Function: Control, Driving
Casing Protection: Protection Type
Number of Poles: 10

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

The Benefits of Using a Gear Motor

A gear motor works on the principle of conservation of angular momentum. As the smaller gear covers more RPM and the larger gear produces more torque, the ratio between the two is greater than one. Similarly, a multiple gear motor follows the principle of energy conservation, with the direction of rotation always opposite to the one that is adjacent to it. It’s easy to understand the concept behind gear motors and the various types available. Read on to learn about the different types of gears and their applications.

Electric motor

The choice of an electric motor for gear motor is largely dependent on the application. There are various motor and gearhead combinations available, and some are more efficient than others. However, it is critical to understand the application requirements and select a motor that meets these needs. In this article, we’ll examine some of the benefits of using a gear motor. The pros and cons of each type are briefly discussed. You can buy new gear motors at competitive prices, but they aren’t the most reliable or durable option for your application.
To determine which motor is best for your application, you’ll need to consider the load and speed requirements. A gear motor’s efficiency (e) can be calculated by taking the input and output values and calculating their relation. On the graph below, the input (T) and output (P) values are represented as dashed lines. The input (I) value is represented as the torque applied to the motor shaft. The output (P) is the amount of mechanical energy converted. A DC gear motor is 70% efficient at 3.75 lb-in / 2,100 rpm.
In addition to the worm gear motor, you can also choose a compact DC worm gear motor with a variable gear ratio from 7.5 to 80. It has a range of options and can be custom-made for your specific application. The 3-phase AC gear motor, on the other hand, works at a rated power of one hp and torque of 1.143.2 kg-m. The output voltage is typically 220V.
Another important factor is the output shaft orientation. There are two main orientations for gearmotors: in-line and offset. In-line output shafts are most ideal for applications with high torque and short reduction ratios. If you want to avoid backlash, choose a right angle output shaft. An offset shaft can cause the output shaft to become excessively hot. If the output shaft is angled at a certain angle, it may be too large or too small.
Motor

Gear reducer

A gear reducer is a special kind of speed reducing motor, usually used in large machinery, such as compressors. These reducers have no cooling fan and are not designed to handle heavy loads. Different purposes require different service factors. For instance, a machine that requires frequent fast accelerations and occasional load spikes needs a gear reducer with a high service factor. A gear reducer that’s designed for long production shifts should be larger than a machine that uses it for short periods of time.
A gear reducer can reduce the speed of a motor by a factor of two. The reduction ratio changes the rotation speed of the receiving member. This change in speed is often required to solve problems of inertia mismatch. The torque density of a gear reducer is measured in newton meters and will depend on the motor used. The first criterion is the configuration of the input and output shafts. A gear ratio of 2:1, for example, means that the output speed has been cut in half.
Bevel gear reducers are a good option if the input and output shafts are perpendicular. This type is very robust and is perfect for situations where the angle between two axes is small. However, bevel gear reducers are expensive and require constant maintenance. They are usually used in heavy-duty conveyors and farm equipment. The correct choice of gear reducer for gear motor is crucial for the efficiency and reliability of the mechanism. To get the best gear reducer for your application, talk to a qualified manufacturer today.
Choosing a gear reducer for a gear motor can be tricky. The wrong one can ruin an entire machine, so it’s important to know the specifics. You must know the torque and speed requirements and choose a motor with the appropriate ratio. A gear reducer should also be compatible with the motor it’s intended for. In some cases, a smaller motor with a gear reducer will work better than a larger one.
Motor

Motor shaft

Proper alignment of the motor shaft can greatly improve the performance and life span of rotating devices. The proper alignment of motors and driven instruments enhances the transfer of energy from the motor to the instrument. Incorrect alignment leads to additional noise and vibration. It may also lead to premature failure of couplings and bearings. Misalignment also results in increased shaft and coupling temperatures. Hence, proper alignment is critical to improve the efficiency of the driven instrument.
When choosing the correct type of gear train for your motor, you need to consider its energy efficiency and the torque it can handle. A helical geared motor is more efficient for high output torque applications. Depending on the required speed and torque, you can choose between an in-line and a parallel helical geared motor. Both types of gears have their advantages and disadvantages. Spur gears are widespread. They are toothed and run parallel to the motor shaft.
A planetary gear motor can also have a linear output shaft. A stepping motor should not operate at too high current to prevent demagnetization, which will lead to step loss or torque drop. Ensure that the motor and gearbox output shafts are protected from external impacts. If the motor and gearbox are not protected against bumps, they may cause thread defects. Make sure that the motor shafts and rotors are protected from external impacts.
When choosing a metal for your gear motor’s motor shaft, you should consider the cost of hot-rolled bar stock. Its outer layers are more difficult to machine. This type of material contains residual stresses and other problems that make it difficult to machine. For these applications, you should choose a high-strength steel with hard outer layers. This type of steel is cheaper, but it also has size considerations. It’s best to test each material first to determine which one suits your needs.
In addition to reducing the speed of your device, a geared motor also minimizes the torque generated by your machine. It can be used with both AC and DC power. A high-quality gear motor is vital for stirring mechanisms and conveyor belts. However, you should choose a geared motor that uses high-grade gears and provides maximum efficiency. There are many types of planetary gear motors and gears on the market, and it’s important to choose the right one.
Motor

First stage gears

The first stage gears of a gear motor are the most important components of the entire device. The motor’s power transmission is 90% efficient, but there are many factors that can affect its performance. The gear ratios used should be high enough to handle the load, but not too high that they are limiting the motor’s speed. A gear motor should also have a healthy safety factor, and the lubricant must be sufficient to overcome any of these factors.
The transmission torque of the gear changes with its speed. The transmission torque at the input side of the gear decreases, transferring a small torque to the output side. The number of teeth and the pitch circle diameters can be used to calculate the torque. The first stage gears of gear motors can be categorized as spur gears, helical gears, or worm gears. These three types of gears have different torque capacities.
The first stage helical gear is the most important part of a gear motor. Its function is to transfer rotation from one gear to the other. Its output is the gearhead. The second stage gears are connected by a carrier. They work in tandem with the first stage gear to provide the output of the gearhead. Moreover, the first stage carrier rotates in the same direction as the input pinion.
Another important component is the output torque of the gearmotor. When choosing a gearmotor, consider the starting torque, running torque, output speed, overhung and shock loads, duty cycles, and more. It is crucial to choose a gearmotor with the right ratio for the application. By choosing the proper gearmotor, you will get maximum performance with minimal operating costs and increase plant productivity. For more information on first stage gears, check out our blog.
The first stage of a gear motor is composed of a set of fixed and rotating sprockets. The first stage of these gears acts as a drive gear. Its rotational mass is a limiting factor for torque. The second stage consists of a rotating shaft. This shaft rotates in the direction of the torque axis. It is also the limiting force for the motor’s torque.

China 24mm 12V DC Planetary Gear Motor Reducer     motor efficiencyChina 24mm 12V DC Planetary Gear Motor Reducer     motor efficiency
editor by czh 2023-01-17

China 22mm 12V DC Planetary Gear Motor Reducer with Great quality

Product Description

We are a professional manufacturer for micro DC motor, our products include carbon brush motor, metal brush motor, brushless motor, stepper motor. We got ISO9001, TS16949 certificate, if you have any enquiry, please feel free to contact me.

 

US $0.2
/ Piece
|
1,000 Pieces

(Min. Order)

###

Application: Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed: High Speed
Excitation Mode: Shunt
Function: Control, Driving
Casing Protection: Protection Type
Number of Poles: 10

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
US $0.2
/ Piece
|
1,000 Pieces

(Min. Order)

###

Application: Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed: High Speed
Excitation Mode: Shunt
Function: Control, Driving
Casing Protection: Protection Type
Number of Poles: 10

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

The Benefits of Using a Gear Motor

A gear motor works on the principle of conservation of angular momentum. As the smaller gear covers more RPM and the larger gear produces more torque, the ratio between the two is greater than one. Similarly, a multiple gear motor follows the principle of energy conservation, with the direction of rotation always opposite to the one that is adjacent to it. It’s easy to understand the concept behind gear motors and the various types available. Read on to learn about the different types of gears and their applications.

Electric motor

The choice of an electric motor for gear motor is largely dependent on the application. There are various motor and gearhead combinations available, and some are more efficient than others. However, it is critical to understand the application requirements and select a motor that meets these needs. In this article, we’ll examine some of the benefits of using a gear motor. The pros and cons of each type are briefly discussed. You can buy new gear motors at competitive prices, but they aren’t the most reliable or durable option for your application.
To determine which motor is best for your application, you’ll need to consider the load and speed requirements. A gear motor’s efficiency (e) can be calculated by taking the input and output values and calculating their relation. On the graph below, the input (T) and output (P) values are represented as dashed lines. The input (I) value is represented as the torque applied to the motor shaft. The output (P) is the amount of mechanical energy converted. A DC gear motor is 70% efficient at 3.75 lb-in / 2,100 rpm.
In addition to the worm gear motor, you can also choose a compact DC worm gear motor with a variable gear ratio from 7.5 to 80. It has a range of options and can be custom-made for your specific application. The 3-phase AC gear motor, on the other hand, works at a rated power of one hp and torque of 1.143.2 kg-m. The output voltage is typically 220V.
Another important factor is the output shaft orientation. There are two main orientations for gearmotors: in-line and offset. In-line output shafts are most ideal for applications with high torque and short reduction ratios. If you want to avoid backlash, choose a right angle output shaft. An offset shaft can cause the output shaft to become excessively hot. If the output shaft is angled at a certain angle, it may be too large or too small.
Motor

Gear reducer

A gear reducer is a special kind of speed reducing motor, usually used in large machinery, such as compressors. These reducers have no cooling fan and are not designed to handle heavy loads. Different purposes require different service factors. For instance, a machine that requires frequent fast accelerations and occasional load spikes needs a gear reducer with a high service factor. A gear reducer that’s designed for long production shifts should be larger than a machine that uses it for short periods of time.
A gear reducer can reduce the speed of a motor by a factor of two. The reduction ratio changes the rotation speed of the receiving member. This change in speed is often required to solve problems of inertia mismatch. The torque density of a gear reducer is measured in newton meters and will depend on the motor used. The first criterion is the configuration of the input and output shafts. A gear ratio of 2:1, for example, means that the output speed has been cut in half.
Bevel gear reducers are a good option if the input and output shafts are perpendicular. This type is very robust and is perfect for situations where the angle between two axes is small. However, bevel gear reducers are expensive and require constant maintenance. They are usually used in heavy-duty conveyors and farm equipment. The correct choice of gear reducer for gear motor is crucial for the efficiency and reliability of the mechanism. To get the best gear reducer for your application, talk to a qualified manufacturer today.
Choosing a gear reducer for a gear motor can be tricky. The wrong one can ruin an entire machine, so it’s important to know the specifics. You must know the torque and speed requirements and choose a motor with the appropriate ratio. A gear reducer should also be compatible with the motor it’s intended for. In some cases, a smaller motor with a gear reducer will work better than a larger one.
Motor

Motor shaft

Proper alignment of the motor shaft can greatly improve the performance and life span of rotating devices. The proper alignment of motors and driven instruments enhances the transfer of energy from the motor to the instrument. Incorrect alignment leads to additional noise and vibration. It may also lead to premature failure of couplings and bearings. Misalignment also results in increased shaft and coupling temperatures. Hence, proper alignment is critical to improve the efficiency of the driven instrument.
When choosing the correct type of gear train for your motor, you need to consider its energy efficiency and the torque it can handle. A helical geared motor is more efficient for high output torque applications. Depending on the required speed and torque, you can choose between an in-line and a parallel helical geared motor. Both types of gears have their advantages and disadvantages. Spur gears are widespread. They are toothed and run parallel to the motor shaft.
A planetary gear motor can also have a linear output shaft. A stepping motor should not operate at too high current to prevent demagnetization, which will lead to step loss or torque drop. Ensure that the motor and gearbox output shafts are protected from external impacts. If the motor and gearbox are not protected against bumps, they may cause thread defects. Make sure that the motor shafts and rotors are protected from external impacts.
When choosing a metal for your gear motor’s motor shaft, you should consider the cost of hot-rolled bar stock. Its outer layers are more difficult to machine. This type of material contains residual stresses and other problems that make it difficult to machine. For these applications, you should choose a high-strength steel with hard outer layers. This type of steel is cheaper, but it also has size considerations. It’s best to test each material first to determine which one suits your needs.
In addition to reducing the speed of your device, a geared motor also minimizes the torque generated by your machine. It can be used with both AC and DC power. A high-quality gear motor is vital for stirring mechanisms and conveyor belts. However, you should choose a geared motor that uses high-grade gears and provides maximum efficiency. There are many types of planetary gear motors and gears on the market, and it’s important to choose the right one.
Motor

First stage gears

The first stage gears of a gear motor are the most important components of the entire device. The motor’s power transmission is 90% efficient, but there are many factors that can affect its performance. The gear ratios used should be high enough to handle the load, but not too high that they are limiting the motor’s speed. A gear motor should also have a healthy safety factor, and the lubricant must be sufficient to overcome any of these factors.
The transmission torque of the gear changes with its speed. The transmission torque at the input side of the gear decreases, transferring a small torque to the output side. The number of teeth and the pitch circle diameters can be used to calculate the torque. The first stage gears of gear motors can be categorized as spur gears, helical gears, or worm gears. These three types of gears have different torque capacities.
The first stage helical gear is the most important part of a gear motor. Its function is to transfer rotation from one gear to the other. Its output is the gearhead. The second stage gears are connected by a carrier. They work in tandem with the first stage gear to provide the output of the gearhead. Moreover, the first stage carrier rotates in the same direction as the input pinion.
Another important component is the output torque of the gearmotor. When choosing a gearmotor, consider the starting torque, running torque, output speed, overhung and shock loads, duty cycles, and more. It is crucial to choose a gearmotor with the right ratio for the application. By choosing the proper gearmotor, you will get maximum performance with minimal operating costs and increase plant productivity. For more information on first stage gears, check out our blog.
The first stage of a gear motor is composed of a set of fixed and rotating sprockets. The first stage of these gears acts as a drive gear. Its rotational mass is a limiting factor for torque. The second stage consists of a rotating shaft. This shaft rotates in the direction of the torque axis. It is also the limiting force for the motor’s torque.

China 22mm 12V DC Planetary Gear Motor Reducer     with Great qualityChina 22mm 12V DC Planetary Gear Motor Reducer     with Great quality
editor by czh 2022-11-25

in Cucuta Colombia sales price shop near me near me shop factory supplier Planetary Gearbox Reducer with Hydraulic Motor Bonfiglioli Type manufacturer best Cost Custom Cheap wholesaler

  in Cucuta Colombia  sales   price   shop   near me   near me shop   factory   supplier Planetary Gearbox Reducer with Hydraulic Motor Bonfiglioli Type manufacturer   best   Cost   Custom   Cheap   wholesaler

specialize in energy transmission merchandise, CATV merchandise, mechanical seal, hydraulic and Pheumatic, and advertising goods. Our experts and engineers have 23 years of Knowledge in the Bearing Business. Thanks to our sincerity in supplying ideal services to our clients, knowing of your needs and overriding feeling of obligation toward filling ordering requirements, Planetary EPT EPT with Hydraulic Motor EPTonfiglioli Type

Technical info:
one. Ratio selection: 3.fifteen-9000
2. Enter EPT: .twenty five-55KW
three. Allow torque rang: le 800000N. M
four. Output speed: .425-445 r/min
5. Framework method: Possibility of flange, foot, or shaft mounting answers

Equivalent to bonfiglioli planetary equipment box Characteristic:
1. Wide and thorough assortment of N series for EPT purposes
2. Lower velocity shaft style: Cylindrical with crucial, splined, hollow with shrink disc or splined hollow shaft
3. Rigid and exact nodular cast iron casing
4. Lower sound managing, substantial manufacturing good quality stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd

  in Cucuta Colombia  sales   price   shop   near me   near me shop   factory   supplier Planetary Gearbox Reducer with Hydraulic Motor Bonfiglioli Type manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Cucuta Colombia  sales   price   shop   near me   near me shop   factory   supplier Planetary Gearbox Reducer with Hydraulic Motor Bonfiglioli Type manufacturer   best   Cost   Custom   Cheap   wholesaler

in Joinville Brazil sales price shop near me near me shop factory supplier Cycloidal Gearbox Cyclo Gear Box Drive Motor Speed Reducer Gearboxes Planetary Sumitomo Power Industrial Transmission Best Price Manufacture Cycloidal Gearbox manufacturer best Cost Custom Cheap wholesaler

  in Joinville Brazil  sales   price   shop   near me   near me shop   factory   supplier Cycloidal Gearbox Cyclo Gear Box Drive Motor Speed Reducer Gearboxes Planetary Sumitomo Power Industrial Transmission Best Price Manufacture Cycloidal Gearbox manufacturer   best   Cost   Custom   Cheap   wholesaler

We have exported our items to Korea, Turkey, Bulgaria, Romania, Russia, Italy, Norway, the Usa, Canada, and many others. Entire use has been produced of all kinds of innovative methods and technologies to get to excelsior production. We provide OEM support.

Cycloidal EPT cyclo gear box travel motor pace EPT EPTes planetary sumitomo EPT EPT EPT best value manufacture Cycloidal EPT

X / EPT collection higher high quality cycloidal EPT little planetary EPT

Fast Specifics:

Sort: XEPT collection Cycloidal Pin Wheel Velocity EPT

Input Pace: one thousand-1500rmp

Output Speed: .3-280rpm

Certification: ISO9001 CE

Ex EPT:.09-132KW

Warranty: 1Years

Solution Title X/EPT series Cycloidal Pin Wheel Pace EPT
EPT Gear EPT GCR15
EPT scenario EPT Solid Iron
Colour EPTlue,Environmentally friendly, or Customized
HS Code 84834090
Product X3
Delivery time 7-10days
EPTrand TIANGOU

  in Joinville Brazil  sales   price   shop   near me   near me shop   factory   supplier Cycloidal Gearbox Cyclo Gear Box Drive Motor Speed Reducer Gearboxes Planetary Sumitomo Power Industrial Transmission Best Price Manufacture Cycloidal Gearbox manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Joinville Brazil  sales   price   shop   near me   near me shop   factory   supplier Cycloidal Gearbox Cyclo Gear Box Drive Motor Speed Reducer Gearboxes Planetary Sumitomo Power Industrial Transmission Best Price Manufacture Cycloidal Gearbox manufacturer   best   Cost   Custom   Cheap   wholesaler

Custom helical worm traduccion Cheap made in China – replacement parts – in Dar es Salaam United Republic of Tanzania Drawing Planetary Gearbox Reducer 3 Arcmin Ratio 3: 1 to 10: 1 for NEMA23 Stepper Motor Input Shaft 1 4inch 6.35mm with top quality

Custom helical worm traduccion Cheap  made in China - replacement parts -  in Dar es Salaam United Republic of Tanzania  Drawing Planetary Gearbox Reducer 3 Arcmin Ratio 3: 1 to 10: 1 for NEMA23 Stepper Motor Enter Shaft 1 4inch 6.35mm with prime quality

We – EPG Team the biggest worm gearbox, couplings and gears factory in China with 5 distinct branches. For more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /

Be aware:

onest: Please compose me your ratio soon after buy.

We can also provide Ratio:

1 stage reducer ratio: 3:1,4:1,5:1,7:1,ten:1

 

twond:We will ship the planetary reducer as the common dimension as follows:

Frame

Shaft diameter

Rabbet

diagonal Screw gap length

60mm

six.35mm=1/4inch

38.1mm

sixty six.7mm

 

threerd: If any concern on the dimension of the planetary reducer, make sure you write me the dimension drawing of your motor. We offer you customise support for your motor and can aid you pick the appropriate planetary reducer for your motor.

 

4th: If you need round output frame gearbox, you should tell us.

 

/ The use of unique products manufacturer’s (OEM) portion numbers or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating solution use and compatibility. Our company and the shown alternative areas contained herein are not sponsored, accredited, or made by the OEM. /

Custom helical worm traduccion Cheap  made in China - replacement parts -  in Dar es Salaam United Republic of Tanzania  Drawing Planetary Gearbox Reducer 3 Arcmin Ratio 3: 1 to ten: 1 for NEMA23 Stepper Motor Enter Shaft 1 4inch 6.35mm with prime high quality

Custom helical worm traduccion Cheap  made in China - replacement parts -  in Dar es Salaam United Republic of Tanzania  Drawing Planetary Gearbox Reducer 3 Arcmin Ratio 3: 1 to 10: 1 for NEMA23 Stepper Motor Input Shaft 1 4inch 6.35mm with prime quality