Product Description
Best Selling PA Series CNC Machine Servo Drive Planetary Gearbox Reducer
This helical planetary gearbox is used for servo motor and related device which need to reduce speed or enlarge torque! CZPT helical planetary gearboxes external diameter from 60 to 220, gear ratio from 3 to 100! It has high precision and are widely used with servo motor such like Panasonnic,Fuji, Mitsubishi, Omran,Delta, Teco.
Product Description
Description:
(1).The output shaft is made of large size,large span double bearing design,output shaft and planetary arm bracket as a whole.The input shaft is placed directly on the planet arm bracket to ensure that the reducer has high operating accuracy and maximum torsional rigidity.
(2).Shell and the inner ring gear used integrated design,quenching and tempering after the processing of the teeth so that it can achieve high torque,high precision,high wear resistance.Moreover surface nickel-plated anti-rust treatment,so that its corrosion resistance greatly enhanced.(3).The planetary gear transmission employs full needle roller without retainer to increase the contact surface,which greatly upgrades structural rigidity and service life.
(4).The gear is made of Japanese imported material.After the metal cutting process,the vacuum carburizing heat treatment to 58-62HRC. And then by the hobbing,Get the best tooth shape,tooth direction,to ensure that the gear of high precision and good impact toughness.
(5).Input shaft and sun gear integrated structure,in order to improve the operation accuracy of the reducer.
Product Parameters
Characteristic:
(1) Low Noise:The use of helical gear design,to achieve a smooth,quite operation of the reducer.
(2) High Precision:Backlash is 3 arcmin or less,accurate positioning.
(3) High Rigidity,High Torque:The output shaft used large size,large span double support bearing design,which improves the rigidity and torque of the reducer.
(4) High Efficiency:1-stage up to 95% or more,2-stage up to 92% or more.
(5) Maintenance-Free:Low grease wear,can be lifetime lubrication.
(6) Sealing Effect is Good:Lubricating grease with high viscosity,not easy to separate the characteristics,ip65 protection class to ensure that no grease leakage.
(7) Installation Unrestrained:Can be installed arbitrarily.
(8) Wide Applicability:Applicable to any type of servo motor.
(9) An organic [integral] whole output axis.
| Specifications | PA60 | PA90 | PA120 | PA140 | PA180 | PA220 | |||
| Technal Parameters | |||||||||
| Max. Torque | Nm | 1.5times rated torque | |||||||
| Emergency Stop Torque | Nm | 2.5times rated torque | |||||||
| Max. Radial Load | N | 1530 | 3250 | 6700 | 9400 | 14500 | 16500 | ||
| Max. Axial Load | N | 630 | 1300 | 3000 | 4700 | 7250 | 8250 | ||
| Torsional Rigidity | Nm/arcmin | 6 | 12 | 23 | 47 | 130 | 205 | ||
| Max.Input Speed | rpm | 8000 | 6000 | 6000 | 6000 | 6000 | 3000 | ||
| Rated Input Speed | rpm | 4000 | 3000 | 3000 | 3000 | 3000 | 1500 | ||
| Noise | dB | ≤58 | ≤60 | ≤65 | ≤68 | ≤68 | ≤72 | ||
| Average Life Time | h | 20000 | |||||||
| Efficiency Of Full Load | % | L1≥95% L2≥90% | |||||||
| Return Backlash | P1 | L1 | arcmin | ≤3 | ≤3 | ≤3 | ≤3 | ≤3 | ≤3 |
| L2 | arcmin | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ||
| P2 | L1 | arcmin | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | |
| L2 | arcmin | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ||
| Moment Of Inertia Table | L1 | 3 | Kg*cm2 | 0.16 | 0.61 | 3.25 | 9.21 | 28.98 | 69.7 |
| 4 | Kg*cm2 | 0.14 | 0.48 | 2.74 | 7.54 | 23.67 | 54.61 | ||
| 5 | Kg*cm2 | 0.13 | 0.47 | 2.71 | 7.42 | 23.29 | 53.51 | ||
| 7 | Kg*cm2 | 0.13 | 0.45 | 2.62 | 7.14 | 22.48 | 50.92 | ||
| 8 | Kg*cm2 | 0.13 | 0.45 | 2.6 | 7.14 | / | / | ||
| 10 | Kg*cm2 | 0.13 | 0.4 | 2.57 | 7.03 | 22.51 | 50.18 | ||
| L2 | 12 | Kg*cm2 | 0.13 | 0.45 | 0.45 | 2.63 | 7.3 | 23.59 | |
| 15 | Kg*cm2 | 0.13 | 0.45 | 0.45 | 2.63 | 7.3 | 23.59 | ||
| 20 | Kg*cm2 | 0.13 | 0.45 | 0.45 | 2.63 | 6.92 | 23.33 | ||
| 25 | Kg*cm2 | 0.13 | 0.45 | 0.4 | 2.63 | 6.92 | 22.68 | ||
| 28 | Kg*cm2 | 0.13 | 0.45 | 0.45 | 2.43 | 6.92 | 23.33 | ||
| 30 | Kg*cm2 | 0.13 | 0.45 | 0.45 | 2.43 | 7.3 | 25.59 | ||
| 35 | Kg*cm2 | 0.13 | 0.4 | 0.4 | 2.43 | 6.92 | 22.68 | ||
| 40 | Kg*cm2 | 0.13 | 0.45 | 0.45 | 2.43 | 6.92 | 23.33 | ||
| 50 | Kg*cm2 | 0.13 | 0.4 | 0.4 | 2.39 | 6.92 | 22.68 | ||
| 70 | Kg*cm2 | 0.13 | 0.4 | 0.4 | 2.39 | 6.72 | 22.68 | ||
| 100 | Kg*cm2 | 0.13 | 0.4 | 0.4 | 2.39 | 6.72 | 22.68 | ||
| Technical Parameter | Level | Ratio | PA60 | PA90 | PA120 | PA140 | PA180 | PA220 | |
| Rated Torque | L1 | 3 | Nm | 40 | 105 | 165 | 360 | 880 | 1100 |
| 4 | Nm | 45 | 130 | 230 | 480 | 880 | 1800 | ||
| 5 | Nm | 45 | 130 | 230 | 480 | 1100 | 1800 | ||
| 7 | Nm | 45 | 100 | 220 | 480 | 1100 | 1600 | ||
| 8 | Nm | 40 | 90 | 200 | 440 | / | / | ||
| 10 | Nm | 30 | 75 | 175 | 360 | 770 | 1200 | ||
| L2 | 12 | Nm | 40 | 105 | 165 | 360 | 880 | 1100 | |
| 15 | Nm | 40 | 105 | 165 | 360 | 880 | 1100 | ||
| 20 | Nm | 45 | 130 | 230 | 480 | 1100 | 1800 | ||
| 25 | Nm | 45 | 130 | 230 | 480 | 1100 | 1800 | ||
| 28 | Nm | 45 | 130 | 230 | 480 | 1100 | 1800 | ||
| 30 | Nm | 40 | 105 | 165 | 360 | 880 | 1100 | ||
| 35 | Nm | 45 | 130 | 230 | 480 | 1100 | 1800 | ||
| 40 | Nm | 45 | 130 | 230 | 480 | 1100 | 1800 | ||
| 50 | Nm | 45 | 130 | 230 | 480 | 1100 | 1800 | ||
| 70 | Nm | 45 | 100 | 220 | 480 | 1100 | 1600 | ||
| 100 | Nm | 30 | 75 | 175 | 360 | 770 | 1200 | ||
| Degree Of Protection | IP65 | ||||||||
| Operation Temprature | ºC | – 10ºC to -90ºC | |||||||
| Weight | L1 | kg | 1.25 | 3.75 | 8.5 | 16 | 28.5 | 49.3 | |
| L2 | kg | 1.75 | 5.1 | 12 | 21.5 | 40 | 62.5 | ||
Company Profile
Packaging & Shipping
1. Lead time: 10-15 days as usual, 30 days in busy season, it will be based on the detailed order quantity;
2. Delivery: DHL/ UPS/ FEDEX/ EMS/ TNT
FAQ
1. who are we?
Hefa Group is based in ZheJiang , China, start from 1998,has a 3 subsidiaries in total.The Main Products is planetary gearbox,timing belt pulley, helical gear,spur gear,gear rack,gear ring,chain wheel,hollow rotating platform,module,etc
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.how to choose the suitable planetary gearbox?
First of all,we need you to be CZPT to provide relevant parameters.If you have a motor drawing,it will let us recommend a suitable gearbox for you faster.If not,we hope you can provide the following motor parameters:output speed,output torque,voltage,current,ip,noise,operating conditions,motor size and power,etc
4. why should you buy from us not from other suppliers?
We are a 22 years experiences manufacturer on making the gears, specializing in manufacturing all kinds of spur/bevel/helical gear, grinding gear, gear shaft, timing pulley, rack, planetary gear reducer, timing belt and such transmission gear parts
5. what services can we provide?
Accepted Delivery Terms: Fedex,DHL,UPS;
Accepted Payment Currency:USD,EUR,HKD,GBP,CNY;
Accepted Payment Type: T/T,L/C,PayPal,Western Union;
Language Spoken:English,Chinese,Japanese
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car, Spring Machinery |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Layout: | Coaxial |
| Gear Shape: | Helical Gear |
| Step: | Single-Step |
| Samples: |
US$ 99/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Benefits of a Planetary Motor
If you’re looking for an affordable way to power a machine, consider purchasing a Planetary Motor. These units are designed to provide a massive range of gear reductions, and are capable of generating much higher torques and torque density than other types of drive systems. This article will explain why you should consider purchasing one for your needs. And we’ll also discuss the differences between a planetary and spur gear system, as well as how you can benefit from them.
planetary gears
Planetary gears in a motor are used to reduce the speed of rotation of the armature 8. The reduction ratio is determined by the structure of the planetary gear device. The output shaft 5 rotates through the device with the assistance of the ring gear 4. The ring gear 4 engages with the pinion 3 once the shaft is rotated to the engagement position. The transmission of rotational torque from the ring gear to the armature causes the motor to start.
The axial end surface of a planetary gear device has two circular grooves 21. The depressed portion is used to retain lubricant. This lubricant prevents foreign particles from entering the planetary gear space. This feature enables the planetary gear device to be compact and lightweight. The cylindrical portion also minimizes the mass inertia. In this way, the planetary gear device can be a good choice for a motor with limited space.
Because of their compact footprint, planetary gears are great for reducing heat. In addition, this design allows them to be cooled. If you need high speeds and sustained performance, you may want to consider using lubricants. The lubricants present a cooling effect and reduce noise and vibration. If you want to maximize the efficiency of your motor, invest in a planetary gear hub drivetrain.
The planetary gear head has an internal sun gear that drives the multiple outer gears. These gears mesh together with the outer ring that is fixed to the motor housing. In industrial applications, planetary gears are used with an increasing number of teeth. This distribution of power ensures higher efficiency and transmittable torque. There are many advantages of using a planetary gear motor. These advantages include:
planetary gearboxes
A planetary gearbox is a type of drivetrain in which the input and output shafts are connected with a planetary structure. A planetary gearset can have three main components: an input gear, a planetary output gear, and a stationary position. Different gears can be used to change the transmission ratios. The planetary structure arrangement gives the planetary gearset high rigidity and minimizes backlash. This high rigidity is crucial for quick start-stop cycles and rotational direction.
Planetary gears need to be lubricated regularly to prevent wear and tear. In addition, transmissions must be serviced regularly, which can include fluid changes. The gears in a planetary gearbox will wear out with time, and any problems should be repaired immediately. However, if the gears are damaged, or if they are faulty, a planetary gearbox manufacturer will repair it for free.
A planetary gearbox is typically a 2-speed design, but professional manufacturers can provide triple and single-speed sets. Planetary gearboxes are also compatible with hydraulic, electromagnetic, and dynamic braking systems. The first step to designing a planetary gearbox is defining your application and the desired outcome. Famous constructors use a consultative modeling approach, starting each project by studying machine torque and operating conditions.
As the planetary gearbox is a compact design, space is limited. Therefore, bearings need to be selected carefully. The compact needle roller bearings are the most common option, but they cannot tolerate large axial forces. Those that can handle high axial forces, such as worm gears, should opt for tapered roller bearings. So, what are the advantages and disadvantages of a helical gearbox?
planetary gear motors
When we think of planetary gear motors, we tend to think of large and powerful machines, but in fact, there are many smaller, more inexpensive versions of the same machine. These motors are often made of plastic, and can be as small as six millimeters in diameter. Unlike their larger counterparts, they have only one gear in the transmission, and are made with a small diameter and small number of teeth.
They are similar to the solar system, with the planets rotating around a sun gear. The planet pinions mesh with the ring gear inside the sun gear. All of these gears are connected by a planetary carrier, which is the output shaft of the gearbox. The ring gear and planetary carrier assembly are attached to each other through a series of joints. When power is applied to any of these members, the entire assembly will rotate.
Compared to other configurations, planetary gearmotors are more complicated. Their construction consists of a sun gear centered in the center and several smaller gears that mesh with the central sun gear. These gears are enclosed in a larger internal tooth gear. This design allows them to handle larger loads than conventional gear motors, as the load is distributed among several gears. This type of motor is typically more expensive than other configurations, but can withstand the higher-load requirements of some machines.
Because they are cylindrical in shape, planetary gear motors are incredibly versatile. They can be used in various applications, including automatic transmissions. They are also used in applications where high-precision and speed are necessary. Furthermore, the planetary gear motor is robust and is characterized by low vibrations. The advantages of using a planetary gear motor are vast and include:
planetary gears vs spur gears
A planetary motor uses multiple teeth to share the load of rotating parts. This gives planetary gears high stiffness and low backlash – often as low as one or two arc minutes. These characteristics are important for applications that undergo frequent start-stop cycles or rotational direction changes. This article discusses the benefits of planetary gears and how they differ from spur gears. You can watch the animation below for a clearer understanding of how they operate and how they differ from spur gears.
Planetary gears move in a periodic manner, with a relatively small meshing frequency. As the meshing frequency increases, the amplitude of the frequency also increases. The amplitude of this frequency is small at low clearance values, and increases dramatically at higher clearance levels. The amplitude of the frequency is higher when the clearance reaches 0.2-0.6. The amplitude increases rapidly, whereas wear increases slowly after the initial 0.2-0.6-inch-wide clearance.
In high-speed, high-torque applications, a planetary motor is more effective. It has multiple contact points for greater torque and higher speed. If you are not sure which type to choose, you can consult with an expert and design a custom gear. If you are unsure of what type of motor you need, contact Twirl Motor and ask for help choosing the right one for your application.
A planetary gear arrangement offers a number of advantages over traditional fixed-axis gear system designs. The compact size allows for lower loss of effectiveness, and the more planets in the gear system enhances the torque density and capacity. Another benefit of a planetary gear system is that it is much stronger and more durable than its spur-gear counterpart. Combined with its many advantages, a planetary gear arrangement offers a superior solution to your shifting needs.
planetary gearboxes as a compact alternative to pinion-and-gear reducers
While traditional pinion-and-gear reducer design is bulky and complex, planetary gearboxes are compact and flexible. They are suitable for many applications, especially where space and weight are issues, as well as torque and speed reduction. However, understanding their mechanism and working isn’t as simple as it sounds, so here are some of the key benefits of planetary gearing.
Planetary gearboxes work by using two planetary gears that rotate around their own axes. The sun gear is used as the input, while the planetary gears are connected via a casing. The ratio of these gears is -Ns/Np, with 24 teeth in the sun gear and -3/2 on the planet gear.
Unlike traditional pinion-and-gear reducer designs, planetary gearboxes are much smaller and less expensive. A planetary gearbox is about 50% smaller and weighs less than a pinion-and-gear reducer. The smaller gear floats on top of three large gears, minimizing the effects of vibration and ensuring consistent transmission over time.
Planetary gearboxes are a good alternative to pinion-and-gear drive systems because they are smaller, less complex and offer a higher reduction ratio. Their meshing arrangement is similar to the Milky Way, with the sun gear in the middle and two or more outer gears. They are connected by a carrier that sets their spacing and incorporates an output shaft.
Compared to pinion-and-gear reduces, planetary gearboxes offer higher speed reduction and torque capacity. As a result, planetary gearboxes are small and compact and are often preferred for space-constrained applications. But what about the high torque transfer? If you’re looking for a compact alt
editor by CX 2023-11-14
in Yaroslavl Russian Federation sales price shop near me near me shop factory supplier Sand Industrial 3D Printer & Portable Laser Scanner & OEM Customized Auto Spare Part Gearbox by Rapid Prototyping of 3D Printing Sand Casting & CNC Machining manufacturer best Cost Custom Cheap wholesaler
We have exported our merchandise to Korea, Turkey, Bulgaria, Romania, Russia, Italy, Norway, the United states, Canada, and so forth. Our items are made by modern computerized machinery and tools. Support & Top quality controlWe provide in depth drawings and offer you each time needed. diesel parts for typical rail system:Gas pressure regulator, SCV valve, DRV, widespread rail sensor, etc. with twenty a long time export experience, our marketplace( Europe,US,South The usa) for OE and manufacturers globally , this sort of as bosch,denso,delphi,siemens, and many others.
PCM (Patternless Casting EPT) is a new EPT implementing speedy prototyping EPT to classic resin sand casting approach. Initial, the sand mildew product is acquired from the CAD design of the portion, and the STL file of the sand mildew model is layered to get the cross-EPT photographs and then the manage data is created by the layer specifics. Throughout printing, soon after the raw sand properly blended with the activator, the print head will EPT binEPTto the sand exactly according to the cross-EPT images. The binEPTthen reacts with the activator and cementation will arise quickly to make the sand stacked. The curing ought to be done layer by layer. After curing all layers, the sand mold is appropriately shaped. Exactly where there is no binEPTEPTted, the sand stays unfastened and it is easy to clean up. By removing the uncured sand, a sand mould is completely ready for publish-processing just before casting.
Sand 3D printer
The 4th Era Sand 3D Printer by FHZL is with the optimum printing pace in the market so considerably. It can accommodate diverse printing sand sorts and diverse binEPTtypes for printing, such as silica sand, nice foundry sand, ceramic sand, furan resin, inorganic binEPTetc. Aside from, it can satisfy customers’ requires on different casting materials and distinct casting process by simply selecting the suitable parameters.
The maXiHu (West Lake) Dis.mum construct dimension of PCM2200 is 2200X1000X800mm, which can supply fast prototyping for big measurement intricate casting elements for a variety of EPT this sort of as army, aerospace and vessel and many others. It can save the difficulties of a physical sample to EPT a mildew and also avoid the large expense of creating a mildew for casting. The printed sand molds can accommodate a selection of casting materials this kind of as EPT, iron and steel and many others.
MaXiHu (West Lake) Dis.mum Develop Measurement: 2200X1000X800mm
Modelling Performance: 165L/h
EPT Velocity: 24 Sec./Layer
Layer Thickness: .2-.5mm
The maXiHu (West Lake) Dis.mum build measurement of PCM1800 is 1800X1000X700mm, which can provide rapid prototyping for sophisticated casting parts in no subject big, medium or little dimensions. The EPT characteristic-EPT on Distinct Location of the System, that is to print on specific spot of the platform rather of full area by altering the movement distance of the Sand Paving System on X amp Y aXiHu (West Lake) Dis.s. It can avoid waste of the consumables and can make entire use of the EPT for distinct items.
MaXiHu (West Lake) Dis.mum Construct Size: 1800X1000X700mm
Modelling Effectiveness: 147L/h
EPT Speed: 22 Sec./Layer
Layer Thickness: .2-.5mm
The maXiHu (West Lake) Dis.mum construct dimension of PCM1200 is 1200X1000X600mm, which can offer quick prototyping for complex casting elements in medium or small measurement for different EPT these kinds of as automotive, pump and valve, molding and so on. EPT-work-box configuration is available for buyers who request non-quit production with larger output.
MaXiHu (West Lake) Dis.mum Develop Dimension: 1200X1000X600mm
Modelling Performance: 120L/h
EPT Speed: eighteen Sec./Layer
Layer Thickness: .2-.5mm
The maXiHu (West Lake) Dis.mum construct dimension of PCM800 is 800X750X500mm, which can offer rapid prototyping for intricate casting areas in medium or tiny size for a assortment of EPT. All EPT models can accommodate different sand sorts for printing, for instance, silica sand, wonderful foundry sand, ceramic sand and CB sand etc.
MaXiHu (West Lake) Dis.mum Build Size: 800X750X500mm
Modelling Performance: 49L/h
EPT Speed: 22 Sec./Layer
Layer Thickness: .two-.5mm
Making use of 3D printing sand casting, you can
one. EPTificantly reduce manual labor and improve per capita efficiency by 5 to 10 times
2. EPTificantly increase the shape high quality and balance, and lessen the synthetic quality elements
3. EPTrove the dimensional precision of castings, minimize batch seams, and reduce the depth of submit-
processing perform
4. Untie the constraints of solution style procedure and release the designer’s quotfree quot mother nature
five. EPT integration application subverts the standard production design, quotFive No quot environmentally friendly manufacturing facility prospects
the industry’s EPT transformation.
Our Rewards:
(one) Aggressive value, all merchandise are casted and EPTd in our manufacturing unit, transported right to buyer.
(2) Trustworthy top quality, IATF16946 accredited casting producer, we have strict control about good quality.
(three) Specialist, we target on creation of Vehicle Parts for a lot more than ten several years.
(4) Fast cargo, we have a effective administration system, several computerized casting traces, and much more than 10 machining traces.
(five) Outstanding service, our income group has far more than ten years’ expertise in oversea market, we know you better.
(6) FleXiHu (West Lake) Dis.ble generation, we can customise the product according to your drawing.
FAQ
1. Are you a factory or investing business?
We are a IATF16949 qualified manufacturing unit EPTizing in producing Vehicle elements. We cast and EPT the parts for more than ten a long time.
2. Can you personalize the elements according to the drawing?
We have skilled technical dept., we are able to customise your elements in accordance to the drawings.
three. Can you source samples?
We can source the samples, but you want to bear the deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ment and delivery EPT.
4. Do you have a min orEPTquantity?
We never have a min orEPTquantity, we can ship you the areas in accordance to your drawings
5. What is the period of time of sample manufacturing?
It will just take fifteen~25 daEPTto deveXiHu (West Lake) Dis.Hu (West Lake) Dis. new item.
Automotive motor block
Item Sort: One-cylinder, double-cylinEPTor multi-cylinEPTblocks
EPT: EPT alloy (pre-forged cylinEPTliner), Gray cast iron
CylinEPThead
Item Type: Single-cylinder, double-cylinEPTor multi-cylinEPTheads
EPT: EPT alloy, Gray forged iron, Ductile iron (nodular forged iron)
EPT Vitality EPT and EPT EPT (Shell)
Merchandise Variety: Water-cooled motor housing, two-in-a single amp 3-in-1 motor housing, EPT housing
EPT: EPT alloy(pre-solid metal sleeve), Gray cast iron, Ductile iron (nodular solid iron)
Clutch EPT housing
Solution Variety: different kinds of MT, AMT, AT, DCT, CVT, and so forth. EPT housing
EPT: EPT alloy, Grey forged iron, Ductile iron (nodular solid iron)
Human body chassis
Merchandise Sort: Steering EPT, steering knuckle, sub-frame
EPT: EPT alloy, Gray solid iron, Ductile iron (nodular cast iron)
EPTeller pump valve
Item Kind: EPTeller, pump entire body, pump valve of solitary or multi-stage drinking water pump
EPT: EPT alloy, Gray forged iron, Ductile iron (nodular solid iron), Stainless Metal
Company Short Details:
ZheJiang EPT EPToLi EPT Co., Ltd. is a maker with 129 employees it was estabEPTd in 2011, situated in No. eight, EPT Kebao Rd., Shishan EPT Zone A, EPT District, HangEPT Town, ZheJiang , EPT. The firm occupies an area of seven,044 square meters. ZheJiang EPT EPToLi EPT Co., Ltd. has its own brand in domestic of EPT. They have handed ISO9001:2015 amp ISO14001:2015 certification in 2019, and attained CE certification. ZheJiang EPT EPToLi EPT Co., Ltd. has its personal R ampD office, and acquired a great deal of patent certificates.
ZheJiang EPT EPXiHu (West Lake) Dis.hu (West Lake) Dis. EPT Co., Ltd. is a single of EPT’s earliest companies participating in studying 3D printing EPT and commercialize the EPT. The business successfully deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ed the EPT EPT primarily based on the 3D sand printing and applies the EPT into EPT’s foundry business. Presently it is also 3D printing major EPTrprise in EPTization.
Currently, ZheJiang FengEPT EPToLi (FHZL) EPT Co., Ltd. has grown into a extensive high-tech organization that could offer total R ampD amp production, product sales of 3D sand printing products, 3D printing complex steel components, 3D printing mixed with gravity and lower pressure casting of conventional metallic mildew, CNC precision machining, customization of speedy manufacturing for 3D sand mould (core) printing, application of 3D info processing and 3D EPT built-in EPT, various 3D printing consumables, and many others.
Between of them, the cold main (box) producing EPT for 3D printing of micro-droplet EPT sand mildew was 1st deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ed in EPT, acquired numerous patent certification, this EPT EPT is outstanding and compatible with the traditional process. It would tremendously alterations the standard manufacturing cycle and manufacturing EPT in foundry market.
In the meantime FHZL has much more than 10 years of fast casting amp processing knowledge, in excess of a thousand diverse kinds of merchandise deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ment instances for each 12 months, offered quick production solutions to almost 400 massive EPTrprises equally domestic and abroad, at present, FHZL has the comprehensive capabilities of impartial study and manufacture of 3D printing gear, sand casting, steel mold gravity and low pressure casting, precision machining, and so on. which have been widely used in automotive, pump, valve, engineering EPTry, mining EPTry, construction EPTry, army industry, vessel, aviation, aerospace, new strength, rail transit, casting mould and many other EPT.
FAQ
1.What is the variances with FHZL and our competitor?
FHZL is not only mildew manufacturer but also a high-tech EPTrprise that supplied material study,merchandise layout, mildew EPT,procedure EPT services.A proviEPTof EPT and other steel alloy casting resolution.
two.Why FHZL can be the top SAND Casting mould producer ?
one). Quickly Delivery time : ten-30 daEPTaccording the mold construction,processing difficulty and so on.
2) Strictly EPT Handle: Inspection by CMM,3D handy scanner ,Waterway Tester,Flaw Detector, EPTlographic Microscope,Spectrum Analyzer ,X-RAY flaw detector,Graphic Measurement Instrument,Hardness Tester,Common Tester
3) OutstXiHu (West Lake) Dis.Hu (West Lake) Dis. R ampD capability: Senior professional professionals
four) Provider: Supply product layout — Merchandise overall performance examination for our shopper– Suggest danger product– Layout the most suited mold structure for consumers in accordance to customer’s on-website process stage and practices–Assist our clientele boost their casting indexes — Assist consumer boost their process–Traceable top quality record,for all of our components we have strict supervision procedure from getting to delivery,make sure all mould meet customer’s necessity.
5) Realistic Price tag
three.What is EPT Strength of FHZL company ?
1).We are not only Sand mold maker, but also solution proviEPTof EPT, and so forth. metal-alloy casting troubles.
2)We have capability to do casting EPTlation which can help us to validate the qualitative plan.
3)We possess possess trial-manufacture shop which is utilised for verifying the reasonability of mould style and output the casting parameter for customer’s reference.
four.What is the advantages of our mold manufacturing ?
1).Exceptional Pre-product sales support : solution design / Supplying mildew parameter , approach and so forth for reference.
2).EPT R ampD complex capacity ,with EPT investigation task , information as support even though other individuals manufacture by knowledge.
three).Reverse calculation of deformation,produced information quantification,
5. Creation EPT:
More than ten years’ experience in foundry and machining of automotive components
More than 1000 different varieties of item deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ment encounter for each calendar year
Casting capacity of EPT alloy, forged iron, forged steel, stainless metal and other resources
Numerous of casting EPT abilities of sand mould gravity casting, steel mould gravity and minimal stress casting, and so on.
six. EPT Handle:
Tests ability of sand mildew dimensions and crucial parameters, semifinished solution substance and dimension, completed item dimension and air tightness
Rigid incoming inspection, sample inspection, method inspection and outcoming inspection stXiHu (West Lake) Dis.Hu (West Lake) Dis.rds
7. Task Management:
Task obligation technique- project engineer is liable for the quality and shipping and delivery in the EPT method, from early stage technical interaction, production method follow-up to right after-income provider.
Total on-line monitoring documents from generation to inspection, genuine-time suggestions processing
eight. EPTs: EPT alloy, forged iron, forged metal and stainless metal, and so on.
EPT: Automotive, pump, valve, engineering EPTry, mining EPTry, design EPTry, military business, vessel, aviation, aerospace, new strength, robotic, rail transit, casting mould and many other EPT.
Modes of creation: Sand mildew casting, metallic mildew gravity and reduced strain casting, precision machining, and so on.
