Tag Archives: china stepper motors

China high quality Best Selling NEMA 17 Planetary Geared Stepper Motors with Output Torque up to 3 Nm~10nm motor engine

Product Description

 

Product Description

Planetary Gear Stepping Motor :
Precision high-end upgrade with Nema8, Nema 11, Nema14, Nema 17, Nema23, Nema 24 
stepper motor; low noise, low vibration, firm and durable. Increase torque at low speed.
Reduction ratio:1:3.7 , 1:5.2 , 1:14 , 1:19 ,1:27 ,1:51 , 1:71 ,1:100 ,1:139 , 1:189 ,1:264 , 1:369 ,And 48 hours delivery , in stock .

Application:
Automation control, medical equipment, textile machinery,and packaging machinery fields. Not only in the field of the automation industry, it also has a good use status in the home.   Products with low speed and inertia are often seen: electric curtains, electric shutters, etc
 

Product Parameters

Planetary Gear Box Specification:

Housing Material Metal
Bearing at Output Ball Bearings
Max.Radial Load(10mm from flange) 200N
Max.Shaft Axial Load 100N
Radial Play of Shaft (near to Flange) ≤0.06mm
Axial Play of Shaft ≤0.3mm
Backlash at No-load 1 stage≤1°,2stage≤1.2°,3stage≤1.5°

42HS Hybrid Stepping Motor Specifications:
 

Model No. Step Angle Motor Length(L1) Rated Current Resistance Inductance Holding Torque # of Leads Rotor Inertia Mass Max.Gear Ratio
Voltage /Phase /Phase /Phase
Single Shaft ( °) (L)mm V A Ω mH mN.m No. g.cm2 Kg  
42HSC1409 1.8 34 2.93 1.33 2.2 3.5 270 4 30 0.22 ≤1:369
42HSC4409 1.8 40 2.5 1.5 1.65 3.3 380 4 40 0.3 ≤1:369

42HSC1409 Planetary Gearbox Specifications:
Reduction ratio 3.71 5.18 14 19 27 51 71 100 139 189 264 369
Total Height(L1+L2) (mm) 65.5 65.5 76.1 76.1 76.1 86.5 86.5 86.5 86.5 96.9 96.9 96.9
Output torque ( mN.m) 902 1259 3062 4155 5000 10000 10000 10000 10000 10000 10000 10000
Total Weight(g) 428 428 510 510 510 592 592 592 592 674 674 674
Number of gear trains 1 2 3 4
Reducer Length(L2)   (mm) 31.5 42.1 52.5 62.9
Efficiency 90% 81% 73% 66%

 

42HSC4409 Planetary Gearbox Specifications:
Reduction ratio 3.71 5.18 14 19 27 51 71 100 139 189 264 369
Total Height(L1+L2) (mm) 71.5 71.5 82.1 82.1 82.1 92.5 92.5 92.5 92.5 102.9 102.9 102.9
Output torque ( mN.m) 1269 1772 4309 5000 5000 10000 10000 10000 10000 10000 10000 10000
Total Weight(g) 508 508 590 590 590 672 672 672 672 754 754 754
Number of gear trains 1 2 3 4
Reducer Length(L2)   (mm) 31.5 42.1 52.5 62.9
Efficiency 90% 81% 73% 66%

 

Detailed Photos

 

 

Company Profile

ZheJiang UMot Technology Co., Ltd. specializes in R&D and sales of stepper motors, servo motors, linear modules and related motion control products, customizing and designing high-quality motor products for users with special needs around the world, and providing overall solutions for motion control systems. Products are exported to more than 30 countries and regions including the United States, Germany, France, Italy, Russia, and Switzerland. The company’s main products and system design have been widely used in automation control, precision instruments, medical equipment, smart home, 3D printing and many other fields.
Our company has been recognized as a high-tech enterprise by relevant departments, has a complete quality management system, has obtained ISO9001, CE, RoHs and other related certifications, and holds a number of electrical patent certificates. “Concentration, Professionalism, Concentration” in the field of automation of motor R&D and system control solutions is the company’s business purpose. “Be your most trusted partner” is the company’s service philosophy. We have always been aiming to “make first-class products with professional technology”, keep pace with the times, innovate constantly, and provide more users with better products and services.

FAQ

1. Shipping method:
1)International Express delivery DHL&FEDEX &UPS&TNT& 7-10days
2)Shipping by air 7-10 days
3)shipping by sea, delivery time depends on the destination port.

2. Technical Support:
We can provide you with professional technical support. And our products quality guarantee is 6 months. Also, we accept products customized.

3. Why should you buy from us, not from other suppliers?
Professional one-to-1 motor customized. The world’s large enterprise of choice for high-quality suppliers. ISO9001:2008 quality management system certification, through the CE, ROHS certification.

4. How to select models?
Before purchasing, please contact us to confirm model No. and specifications to avoid any misunderstanding.

5. Are you a factory?
Yes, we are a factory, and we produce stepper motor/driver, Servo motor/driver.

 

Application: Automation Control, Medical Equipment, Textile Mac
Speed: Low Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Control, Driving
Number of Poles: 2
Samples:
US$ 42/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

Motor

How to Maximize Gear Motor Reliability

A gearmotor is a mechanical device used to transmit torque from one location to another. As its name implies, it is designed to rotate one object relative to another. Its main use is to transmit torque from one point to another. The most common types of gear motors are: worm, spur, and helical. Each of these has specific functions and can be used for a variety of applications. Reliability is also an important factor to consider when choosing a gearmotor.

Applications of a gear motor

Despite its small size, a gear motor has many applications. These include heavy machinery lifts, hospital beds, and power recliners. It is also found in many everyday products, such as electromechanical clocks and cake mixers. Its versatility allows it to produce a high force from a small electric motor. Here are some of its most common uses. You can also find a gear motor in many household appliances and vehicles.
Before selecting a gearmotor, consider the specifications of the machine you need to power. You should consider its size, weight, and ambient conditions, which include temperature regimes, noise levels, and contaminating sources. You should also take into account the envelope size, mounting method, and orientation. Other considerations include the expected service life, maintenance scope, and control type. The most suitable gearmotor for your specific application will be one that can handle the load.
The motor and gearbox types can be mixed and matched, depending on the application. A three-phase asynchronous motor and a permanent magnet synchronous servomotor are common choices for these devices. The type of motor and gearbox combination you choose will determine the power supply, the efficiency of the motor, and cost. Once you understand the application, it will be easy to integrate a gear motor into your system.
When used in industrial applications, gear motors are effective for reducing the speed of rotating shafts. One third of all industrial electric motor systems use gearing to reduce output speed. They can also save energy, which benefits the workers who operate them. In fact, industrial electric motor systems are responsible for nearly one-tenth of the carbon dioxide emissions that are produced by fossil-fueled power plants. Fortunately, efficiency and reliability are just two of the benefits of using gear motors.

Types

Before choosing a gearmotor, it is important to understand its specifications. The key factors to consider are the size, weight, and noise level of the gearmotor. Additionally, the power, torque, and speed of the motor are important factors. Specifications are also important for its operating environment, such as the temperature and the level of ingress protection. Finally, it is important to determine its duty cycle to ensure it will operate properly. To choose a suitable gearmotor, consult the specifications of your application.
Some common applications of gearmotors include packaging equipment, conveyors, and material handling applications. They also come with several advantages, including their ability to control both position and speed. This makes them ideal for applications where speed and positioning are crucial. Parallel-shaft gear units, for instance, are commonly used in conveyors, material handling, and steel mills. They are also able to operate in high-precision manufacturing. For these reasons, they are the most popular type of gearmotor.
There are three common types of gears. Helical gears have teeth that are inclined at 90 degrees to the axis of rotation, making them more efficient. Helicoidal gears, meanwhile, have a lower noise level and are therefore preferred for applications requiring high torque. Worm gears are preferred for applications where torque and speed reduction are important, and worm gears are suited for those conditions. They also have advantages over spur gears and worm gears.
The application of a gear motor is almost limitless. From heavy machine lifts to hospital bed lifting mechanisms, gear motors make it possible to use a small rotor at a high speed. Their lightweight construction also allows them to move heavy loads, such as cranes, but they do so slowly. Gear motors are an excellent choice in applications where space is an issue. A few common applications are discussed below. When choosing a gear motor, remember to choose the best size and application for your needs.
Motor

Functions

A gearmotor’s speed is directly proportional to the gear ratio. By dividing the input speed by the gear ratio, the output speed can be determined. Gear ratios above one reduce speed, while gear ratios below one increase speed. Efficiency of a gearmotor is defined as its ability to transfer energy through its gearbox. This efficiency factor takes into account losses from friction and slippage. Most gearmotor manufacturers will provide this curve upon request.
There are several factors that must be considered when choosing a gearmotor. First, the application must meet the desired speed and torque. Second, the output shaft must rotate in the desired direction. Third, the load must be properly matched to the gearmotor. Lastly, the operating environment must be considered, including the ambient temperature and the level of protection. These details will help you find the perfect gearmotor. You can compare various types of gear motors on this page and choose the one that will meet your needs.
The micro-DC gear motor is one of the most versatile types of geared motors. These motors are widely used in intelligent automobiles, robotics, logistics, and the smart city. Other applications include precision instruments, personal care tools, and cameras. They are also commonly found in high-end automotives and are used in smart cities. They also find use in many fields including outdoor adventure equipment, photography equipment, and electronics. The benefits of micro-DC gear motors are many.
The main function of a gear motor is to reduce the speed of a rotating shaft. Small electric clocks, for example, use a synchronous motor with a 1,200-rpm output speed to drive the hour, minute, and second hands. While the motor is small, the force it exerts is enormous, so it’s crucial to ensure that the motor isn’t over-powered. There is a high ratio between the input torque and the output torque.

Reliability

The reliability of a gear motor is dependent on a number of factors, including material quality, machining accuracy, and operating conditions. Gear failure is often more serious than surface fatigue, and can compromise personal safety. Reliability is also affected by the conditions of installation, assembly, and usage. The following sections provide an overview of some important factors that impact gear motor reliability. This article provides some tips to maximize gear motor reliability.
First and foremost, make sure you’re buying from a reliable supplier. Gear motors are expensive, and there is no standardization of the sizes. If a gear breaks, replacing it can take a lot of time. In the long run, reliability wins over anything. But this doesn’t mean that you can ignore the importance of gears – the quality of a gear motor is more important than how long it lasts.
Motor

Cost

The cost of a gear motor is relatively low compared to that of other forms of electric motors. This type of motor is commonly used in money counters, printers, smart homes, and automation equipment. A DC gear motor is also commonly used in automatic window machines, glass curtain walls, and banknote vending machines. There are many advantages to using a gear motor. Here are a few of them. Read on to learn more about them.
Speed management is another benefit of a gear motor. The motors tend to have less wear and tear than other motors, which means less frequent replacements. Additionally, many gear motors are easy to install and require less maintenance, which also helps reduce the overall cost of ownership. Lastly, because noise is a common concern for many electronic OEMs, DC gear motors are often quieter than their counterparts. For these reasons, they are often used in industrial settings.
Another advantage of an electric gear motor is its size and power. They are typically designed for 12V, 24V, and 48V voltages and 200-watt power. Their rated speed is 3000 rpm and their torque is 0.64 Nm. They are also more reliable than their AC counterparts and are ideal for many industrial applications. They have a high ratio of three to two, which makes them ideal for a variety of applications.
A gear motor is an electric motor that is coupled with a gear train. It uses AC or DC power, and is often called a gear reducer. The main purpose of these gear reducers is to multiply torque, while maintaining compact size and overall efficiency. However, the efficiency of a gear motor is also affected by ambient temperature and lubricants. If the gear motor is installed in the wrong location, it may be ineffective and result in premature failure of the machine.

China high quality Best Selling NEMA 17 Planetary Geared Stepper Motors with Output Torque up to 3 Nm~10nm   motor engine	China high quality Best Selling NEMA 17 Planetary Geared Stepper Motors with Output Torque up to 3 Nm~10nm   motor engine
editor by CX 2023-04-18

China Sigriner PLMD120/120+ Planetary Gearbox With High Torque and Low Backlash for Stepper and Servo Motors CE motorbase

Product Description

Complex services:

  • In accordance to the relevant parameters presented by the customer, the CZPT engineering software is used to generate the motion load curve diagram of the system tools to get the corresponding parameters and derive the movement load curve. Intuitively exhibit essential parameters and load indexes in the transmission technique to support consumers have out realistic structural design and style.
  • SIGRINER offers a motor databases from 500 servo motor manufacturers throughout the world

Buyer training:
We are honored to provide you with our utilized computing and transmission design experience. We can supply related education in accordance to your needs.   We can offer related training according to your requirements. 

Specific

STAGE 1
Equipment ratio i three 4 five six 7 eight 10
Rated output torque T2N Nm 208 290 330 310 three hundred 260 230
In.lb 1841 2567 2921 2744 2655 2301 2036
The emergency braking minute enables a thousand times in the course of the operating life of the gearbox T 2NOt Nm 3x rated output torque
In.lb
Rated enter velocity (T2N, ambient temperature of 20 levels C)b N  1n rpm 3000 3000 3000 3000 3000 3000 3000
Max input pace N 1max rpm 6000 6000 6000 6000 6000 6000 6000
Max return backlash J t  arcmin PLMD120≤5ARCMIN PLMD+ 120≤3ARCMIN customized ≤1ARCMIN
Noload torque(nt=3000rpm,gear box20ºC) T 012 Nm 3.5 two.seven 2.4 two. one.six 1.5 1.4
In.lb 31. 23.9 21.2 17.7 14.2 13.3 12.4
Twist rigidity C t21 Nm/arcmin 25
    In.lb/arcmin 221
Max radial pressure F 2AMAX N 7000
    Lbf 1575
Max axial pressure F 3RMAX N 3300
    lbf 742.5
Max roll-more than torque M 2KMax Nm 487
    In.lb 4310
Life hour L h Hr ≥20000
Efficient at entire load η % 97
Ambient temperature ºC -15 to 40
F 5 to 104
The housing makes it possible for maximum temperature ºC +ninety
F 194
Lubrication   Life Lubrication
Rotation route   Input and output in the identical path
Defense stage   IP65
Installation path   Any 
Functioning noise (i s 10 and n1 s 3000rpm vacant) LPA          DB(A) ≤58
Inertia J1 Kg.cm2 3.twenty five 2.seventy four two.71 2.65 two.sixty two 2.58 2.fifty seven
10-³in.lb.s² 2.eighty one 2.37 2.35 two.29 2.27 two.23 2.23

Business application

  • We offer quickly supply and powerful assistance all more than the world by means of a complete income and service network
  • With many years of prosperous experience, our authoritative experts offer market place-foremost consulting companies for various industrial sectors
  • Robotics, automation and manipulator technologies

A selection of servo gearboxes and mechanical transmission techniques, from cost-effective to large-finish types can be applied to different robots and their auxiliary axes, these kinds of as transmission shafts and station manage units
       
Printing machine
Modern gearbox ensures stability, synchronization accuracy and extended-expression precision even at large speeds
The excellent remedy for substantial-good quality printing procedures and other continuous responsibility programs
Choice: integrated sensor for monitoring paper pressure and similar parameters

  • Equipment resources and producing methods

Higher precision, stable operation and higher efficiency are all derived from steady, zero backlash and high rigidity mechanical method solutions, these kinds of as the software of products on feed, rotation and auxiliary axes
Functions of CZPT Precision planetary gearbox

  • Very higher power density, torque improved by forty%
  • Straightforward motor installation, optional installation with duration payment
  • Versatile installation, the gearbox can be mounted vertically, horizontally, and up or down together with the pushed shaft
  • Quite large positioning precision, return clearance is considerably less than arc minutes
  • Via helical gear meshing, the procedure is secure, and the operating noise is considerably less than 50dB-A
  • The world’s foremost life expectancy, and the raw components and mechanism of the seal ring have been optimized

Purposes.:  
PBM (regular)
Cycle Programs (ED≤60%)
Higher dynamic apps
High positioning accuracy
Reverse procedure
PBMD*Large PERCISION
Software of steady procedure (ED≤60%)
High rated pace
Temperature-delicate apps
Large quality handle transmission

Our Services.:
1) Competitive price and great high quality
2) Utilized for transmission techniques.
three) Superb overall performance, extended utilizing lifestyle
four) Prompt reaction on obtaining Inquiries or any other messages from buyers
five) only normal planetary gearbox provided
Supply and delivery: We provide CZPT transport, global convey and air transportation to provide your products to you.
(*Arrival time will fluctuate based on location country plan and targeted traffic problem.)
Serving: All goods have a one-calendar year guarantee and online technical support. 
FAQ
Q: Are you buying and selling business or maker?
A: We are team business with massive range of products and generation bases, also do investing firm company with far more than twenty several years export activities.
Q:What is actually the MOQ?
A: 1 or 2pcs is obtainable.
Q: How extended is your delivery time?
A: 3-5 days by means of DHL, TNT, UPS, FEDEX. Ocean transport is based on distinct countries.

Packaging & Delivery
packaged in Carton with foam inside of or as for each customer’s demands (Common export canton)  
 

US $158-888
/ Piece
|
1 Piece

(Min. Order)

###

Type: Bearing
Phase: Single/Three
Transport Package: Cartons
Specification: ***
Trademark: ISO, CE, RoHS
Origin: China

###

STAGE 1
Gear ratio i 3 4 5 6 7 8 10
Rated output torque T2N Nm 208 290 330 310 300 260 230
In.lb 1841 2567 2921 2744 2655 2301 2036
The emergency braking moment allows 1000 times during the operating life of the gearbox T 2NOt Nm 3x rated output torque
In.lb
Rated input speed (T2N, ambient temperature of 20 degrees C)b N  1n rpm 3000 3000 3000 3000 3000 3000 3000
Max input speed N 1max rpm 6000 6000 6000 6000 6000 6000 6000
Max return backlash J t  arcmin PLMD1205ARCMIN PLMD+ 1203ARCMIN customized 1ARCMIN
Noload torque(nt=3000rpm,gear box20ºC) T 012 Nm 3.5 2.7 2.4 2.0 1.6 1.5 1.4
In.lb 31.0 23.9 21.2 17.7 14.2 13.3 12.4
Twist rigidity C t21 Nm/arcmin 25
    In.lb/arcmin 221
Max radial force F 2AMAX N 7000
    Lbf 1575
Max axial force F 3RMAX N 3300
    lbf 742.5
Max roll-over torque M 2KMax Nm 487
    In.lb 4310
Life hour L h Hr ≥20000
Efficient at full load η % 97
Ambient temperature ºC -15 to 40
F 5 to 104
The housing allows maximum temperature ºC +90
F 194
Lubrication   Life Lubrication
Rotation direction   Input and output in the same direction
Protection level   IP65
Installation direction   Any 
Operating noise (i s 10 and n1 s 3000rpm empty) LPA          DB(A) ≤58
Inertia J1 Kg.cm2 3.25 2.74 2.71 2.65 2.62 2.58 2.57
10-³in.lb.s² 2.81 2.37 2.35 2.29 2.27 2.23 2.23
US $158-888
/ Piece
|
1 Piece

(Min. Order)

###

Type: Bearing
Phase: Single/Three
Transport Package: Cartons
Specification: ***
Trademark: ISO, CE, RoHS
Origin: China

###

STAGE 1
Gear ratio i 3 4 5 6 7 8 10
Rated output torque T2N Nm 208 290 330 310 300 260 230
In.lb 1841 2567 2921 2744 2655 2301 2036
The emergency braking moment allows 1000 times during the operating life of the gearbox T 2NOt Nm 3x rated output torque
In.lb
Rated input speed (T2N, ambient temperature of 20 degrees C)b N  1n rpm 3000 3000 3000 3000 3000 3000 3000
Max input speed N 1max rpm 6000 6000 6000 6000 6000 6000 6000
Max return backlash J t  arcmin PLMD1205ARCMIN PLMD+ 1203ARCMIN customized 1ARCMIN
Noload torque(nt=3000rpm,gear box20ºC) T 012 Nm 3.5 2.7 2.4 2.0 1.6 1.5 1.4
In.lb 31.0 23.9 21.2 17.7 14.2 13.3 12.4
Twist rigidity C t21 Nm/arcmin 25
    In.lb/arcmin 221
Max radial force F 2AMAX N 7000
    Lbf 1575
Max axial force F 3RMAX N 3300
    lbf 742.5
Max roll-over torque M 2KMax Nm 487
    In.lb 4310
Life hour L h Hr ≥20000
Efficient at full load η % 97
Ambient temperature ºC -15 to 40
F 5 to 104
The housing allows maximum temperature ºC +90
F 194
Lubrication   Life Lubrication
Rotation direction   Input and output in the same direction
Protection level   IP65
Installation direction   Any 
Operating noise (i s 10 and n1 s 3000rpm empty) LPA          DB(A) ≤58
Inertia J1 Kg.cm2 3.25 2.74 2.71 2.65 2.62 2.58 2.57
10-³in.lb.s² 2.81 2.37 2.35 2.29 2.27 2.23 2.23

What Is a Gear Motor?

A gear motor is an electric motor coupled with a gear train. It uses either DC or AC power to achieve its purpose. The primary benefit of a gear reducer is its ability to multiply torque while maintaining a compact size. The trade-off of this additional torque comes in the form of a reduced output shaft speed and overall efficiency. However, proper gear technology and ratios provide optimum output and speed profiles. This type of motor unlocks the full potential of OEM equipment.

Inertial load

Inertial load on a gear motor is the amount of force a rotating device produces due to its inverse square relationship with its inertia. The greater the inertia, the less torque can be produced by the gear motor. However, if the inertia is too high, it can cause problems with positioning, settling time, and controlling torque and velocity. Gear ratios should be selected for optimal power transfer.
The duration of acceleration and braking time of a gear motor depends on the type of driven load. An inertia load requires longer acceleration time whereas a friction load requires breakaway torque to start the load and maintain it at its desired speed. Too short a time period can cause excessive gear loading and may result in damaged gears. A safe approach is to disconnect the load when power is disconnected to prevent inertia from driving back through the output shaft.
Inertia is a fundamental concept in the design of motors and drive systems. The ratio of mass and inertia of a load to a motor determines how well the motor can control its speed during acceleration or deceleration. The mass moment of inertia, also called rotational inertia, is dependent on the mass, geometry, and center of mass of an object.
Motor

Applications

There are many applications of gear motors. They provide a powerful yet efficient means of speed and torque control. They can be either AC or DC, and the two most common motor types are the three-phase asynchronous and the permanent magnet synchronous servomotor. The type of motor used for a given application will determine its cost, reliability, and complexity. Gear motors are typically used in applications where high torque is required and space or power constraints are significant.
There are two types of gear motors. Depending on the ratio, each gear has an output shaft and an input shaft. Gear motors use hydraulic pressure to produce torque. The pressure builds on one side of the motor until it generates enough torque to power a rotating load. This type of motors is not recommended for applications where load reversals occur, as the holding torque will diminish with age and shaft vibration. However, it can be used for precision applications.
The market landscape shows the competitive environment of the gear motor industry. This report also highlights key items, income and value creation by region and country. The report also examines the competitive landscape by region, including the United States, China, India, the GCC, South Africa, Brazil, and the rest of the world. It is important to note that the report contains segment-specific information, so that readers can easily understand the market potential of the geared motors market.

Size

The safety factor, or SF, of a gear motor is an important consideration when selecting one for a particular application. It compensates for the stresses placed on the gearing and enables it to run at maximum efficiency. Manufacturers provide tables detailing typical applications, with multiplication factors for duty. A gear motor with a SF of three or more is suitable for difficult applications, while a gearmotor with a SF of one or two is suitable for relatively easy applications.
The global gear motor market is highly fragmented, with numerous small players catering to various end-use industries. The report identifies various industry trends and provides comprehensive information on the market. It outlines historical data and offers valuable insights on the industry. The report also employs several methodologies and approaches to analyze the market. In addition to providing historical data, it includes detailed information by market segment. In-depth analysis of market segments is provided to help identify which technologies will be most suitable for which applications.
Motor

Cost

A gear motor is an electric motor that is paired with a gear train. They are available in AC or DC power systems. Compared to conventional motors, gear reducers can maximize torque while maintaining compact dimensions. But the trade-off is the reduced output shaft speed and overall efficiency. However, when used correctly, a gear motor can produce optimal output and mechanical fit. To understand how a gear motor works, let’s look at two types: right-angle geared motors and inline geared motors. The first two types are usually used in automation equipment and in agricultural and medical applications. The latter type is designed for rugged applications.
In addition to its efficiency, DC gear motors are space-saving and have low energy consumption. They can be used in a number of applications including money counters and printers. Automatic window machines and curtains, glass curtain walls, and banknote vending machines are some of the other major applications of these motors. They can cost up to 10 horsepower, which is a lot for an industrial machine. However, these are not all-out expensive.
Electric gear motors are versatile and widely used. However, they do not work well in applications requiring high shaft speed and torque. Examples of these include conveyor drives, frozen beverage machines, and medical tools. These applications require high shaft speed, so gear motors are not ideal for these applications. However, if noise and other problems are not a concern, a motor-only solution may be the better choice. This way, you can use a single motor for multiple applications.
Motor

Maintenance

Geared motors are among the most common equipment used for drive trains. Proper maintenance can prevent damage and maximize their efficiency. A guide to gear motor maintenance is available from WEG. To prevent further damage, follow these maintenance steps:
Regularly check electrical connections. Check for loose connections and torque them to the recommended values. Also, check the contacts and relays to make sure they are not tangled or damaged. Check the environment around the gear motor to prevent dust from clogging the passageway of electric current. A proper maintenance plan will help you identify problems and extend their life. The manual will also tell you about any problems with the gearmotor. However, this is not enough – it is important to check the condition of the gearbox and its parts.
Conduct visual inspection. The purpose of visual inspection is to note any irregularities that may indicate possible problems with the gear motor. A dirty motor may be an indication of a rough environment and a lot of problems. You can also perform a smell test. If you can smell a burned odor coming from the windings, there may be an overheating problem. Overheating can cause the windings to burn and damage.
Reactive maintenance is the most common method of motor maintenance. In this type of maintenance, you only perform repairs if the motor stops working due to a malfunction. Regular inspection is necessary to avoid unexpected motor failures. By using a logbook to document motor operations, you can determine when it is time to replace the gear motor. In contrast to preventive maintenance, reactive maintenance requires no regular tests or services. However, it is recommended to perform inspections every six months.

China Sigriner PLMD120/120+ Planetary Gearbox With High Torque and Low Backlash for Stepper and Servo Motors CE     motorbaseChina Sigriner PLMD120/120+ Planetary Gearbox With High Torque and Low Backlash for Stepper and Servo Motors CE     motorbase
editor by czh 2023-01-26

China Good Quality High Torque Low Speed NEMA 8 17 23 Geared Stepper Motor, 42mm 57mm Stepping Motors with Planetary Gearhead brushless motor

Merchandise Description

 

Item Description

Planetary Equipment Stepping Motor :
Precision high-end upgrade with Nema8, Nema 11, Nema14, Nema 17, Nema23, Nema 24 
stepper motor low noise, low vibration, firm and durable. Increase torque at low speed.
Reduction ratio:1:3.7 , 1:5.2 , 1:14 , 1:19 ,1:27 ,1:51 , 1:71 ,1:100 ,1:139 , 1:189 ,1:264 , 1:369 ,And 48 hours delivery , in stock .

Software:
Automation control, medical equipment, textile machinery,and packaging machinery fields. Not only in the field of the automation industry, it also has a good use status in the home.   Products with low speed and inertia are often seen: electric curtains, electric shutters, etc.

Product Parameters

Planetary Gear Box Specification:

Housing Materials Metal
Bearing at Output Ball Bearings
Max.Radial Load(10mm from flange) 50N
Max.Shaft Axial Load 30N
Radial Perform of Shaft (in close proximity to to Flange) ≤0.08mm
Axial Engage in of Shaft ≤0.3mm
Backlash at No-load one stage≤1°,2stage≤1.2°,3stage≤1.5°

20HS Hybrid Stepping Motor Specifications:

Model No. Step Angle Motor Size(L1) Rated Current Resistance Inductance Holding Torque # of Prospects Rotor Inertia Mass Max.Equipment Ratio
Voltage /Stage /Section /Phase
Solitary Shaft ( °) (L)mm V A Ω mH mN.m No. g.cm2 Kg  
20HS1405 one.8 thirty 3.25 .five six.five one.five 15 4 2 .06 ≤1:369
20HS6401 1.8 41 4.four .8 5.five 1.5 thirty 4 three .one ≤1:369

20HS1450 Planetary Gearbox Motor Technical specs:

Reduction ratio three.seventy one five.18 fourteen 19 27 51 71 100 139 189 264 369
Overall Peak(L1+L2) (mm) 53.4 53.four 60 sixty 60 66.4 sixty six.four 66.4 66.4 seventy two.8 seventy two.8 72.8
Output torque ( mN.m) fifty 70 170 231 328 558 777 1095 1522 1871 2000 2000
Whole Weight(g) 91 91 97 ninety seven ninety seven 103 103 103 103 109 109 109
Amount of equipment trains 1 2 3 4
Reducer Length(L2)   (mm) 23.four 30. 36.four 42.8
Performance 90% 81% 73% 66%

20HS6401 Planetary Gearbox Motor Specifications:
Reduction ratio 3.71 5.18 fourteen 19 27 51 71 100 139 189 264 369
Whole Top(L1+L2) (mm) 64.four 64.4 71 71 seventy one 77.4 seventy seven.four seventy seven.four 77.four 83.8 83.eight eighty three.8
Output torque ( mN.m) one hundred one hundred forty 340 462 656 1117 1555 2000 2000 2000 2000 2000
Total Weight(g) 131 131 137 137 137 143 143 143 143 149 149 149
Number of gear trains 1 2 3 4
Reducer Size(L2)   (mm) 23.4 30 36.four 42.8
Effectiveness 90% 81% 73% 66%

 

Thorough Pictures

 

Parameters of Drawing

Company Profile

ZheJiang UMot Technologies Co., Ltd. specializes in R&D and sales of stepper motors, servo motors, linear modules and relevant movement control goods, customizing and planning higher-high quality motor products for consumers with unique wants close to the globe, and supplying all round solutions for motion manage systems. Products are exported to a lot more than 30 nations around the world and regions such as the United States, Germany, France, Italy, Russia, and Switzerland. The company’s main items and program design have been widely utilised in automation management, precision devices, healthcare products, sensible home, 3D printing and a lot of other fields.
Our firm has been regarded as a high-tech enterprise by appropriate departments, has a total quality administration program, has attained ISO9001, CE, RoHs and other connected certifications, and holds a variety of electrical patent certificates. “Focus, Professionalism, Focus” in the subject of automation of motor R&D and system handle solutions is the firm’s company purpose. “Be your most reliable companion” is the company’s provider philosophy. We have constantly been aiming to “make initial-class products with expert engineering”, preserve speed with the moments, innovate continually, and supply a lot more customers with better goods and providers.

 

FAQ

 

one. Shipping method:
one)Worldwide Express shipping and delivery DHL&FEDEX &UPS&TNT& 7-10days
two)Delivery by air 7-10 times
3)shipping and delivery by sea, supply time depends on the location port.

2. Technical Help:
We can give you with skilled technological help. And our goods top quality ensure is 6 months. Also, we settle for goods personalized.

3. Why must you acquire from us, not from other suppliers?
Skilled one particular-to-1 motor personalized. The world’s huge company of choice for higher-quality suppliers. ISO9001:2008 good quality management program certification, via the CE, ROHS certification.

four. How to pick versions?
Ahead of buying, make sure you speak to us to affirm model No. and specs to stay away from any misunderstanding.

5. Are you a manufacturing unit?
Of course, we are a factory, and we produce stepper motor/driver, Servo motor/driver.

Application: Precision Medical Instruments
Speed: Low Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Control, Driving
Number of Poles: 2

###

Samples:
US$ 42/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Housing Material Metal
Bearing at Output Ball Bearings
Max.Radial Load(10mm from flange) 50N
Max.Shaft Axial Load 30N
Radial Play of Shaft (near to Flange) 0.08mm
Axial Play of Shaft ≤0.3mm
Backlash at No-load 1 stage,2stage1.2°,3stage1.5°

###

20HS Hybrid Stepping Motor Specifications:

Model No. Step Angle Motor Length(L1) Rated Current Resistance Inductance Holding Torque # of Leads Rotor Inertia Mass Max.Gear Ratio
Voltage /Phase /Phase /Phase
Single Shaft ( °) (L)mm V A Ω mH mN.m No. g.cm2 Kg  
20HS1405 1.8 30 3.25 0.5 6.5 1.5 15 4 2 0.06 1:369
20HS6401 1.8 41 4.4 0.8 5.5 1.5 30 4 3 0.1 1:369

###

20HS6401 Planetary Gearbox Motor Specifications:
Reduction ratio 3.71 5.18 14 19 27 51 71 100 139 189 264 369
Total Height(L1+L2) (mm) 64.4 64.4 71 71 71 77.4 77.4 77.4 77.4 83.8 83.8 83.8
Output torque ( mN.m) 100 140 340 462 656 1117 1555 2000 2000 2000 2000 2000
Total Weight(g) 131 131 137 137 137 143 143 143 143 149 149 149
Number of gear trains 1 2 3 4
Reducer Length(L2)   (mm) 23.4 30 36.4 42.8
Efficiency 90% 81% 73% 66%
Application: Precision Medical Instruments
Speed: Low Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Control, Driving
Number of Poles: 2

###

Samples:
US$ 42/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Housing Material Metal
Bearing at Output Ball Bearings
Max.Radial Load(10mm from flange) 50N
Max.Shaft Axial Load 30N
Radial Play of Shaft (near to Flange) 0.08mm
Axial Play of Shaft ≤0.3mm
Backlash at No-load 1 stage,2stage1.2°,3stage1.5°

###

20HS Hybrid Stepping Motor Specifications:

Model No. Step Angle Motor Length(L1) Rated Current Resistance Inductance Holding Torque # of Leads Rotor Inertia Mass Max.Gear Ratio
Voltage /Phase /Phase /Phase
Single Shaft ( °) (L)mm V A Ω mH mN.m No. g.cm2 Kg  
20HS1405 1.8 30 3.25 0.5 6.5 1.5 15 4 2 0.06 1:369
20HS6401 1.8 41 4.4 0.8 5.5 1.5 30 4 3 0.1 1:369

###

20HS6401 Planetary Gearbox Motor Specifications:
Reduction ratio 3.71 5.18 14 19 27 51 71 100 139 189 264 369
Total Height(L1+L2) (mm) 64.4 64.4 71 71 71 77.4 77.4 77.4 77.4 83.8 83.8 83.8
Output torque ( mN.m) 100 140 340 462 656 1117 1555 2000 2000 2000 2000 2000
Total Weight(g) 131 131 137 137 137 143 143 143 143 149 149 149
Number of gear trains 1 2 3 4
Reducer Length(L2)   (mm) 23.4 30 36.4 42.8
Efficiency 90% 81% 73% 66%

How to Assemble a Planetary Motor

A Planetary Motor uses multiple planetary surfaces to produce torque and rotational speed. The planetary system allows for a wide range of gear reductions. Planetary systems are particularly effective in applications where higher torques and torque density are needed. As such, they are a popular choice for electric vehicles and other applications where high-speed mobility is required. Nevertheless, there are many benefits associated with using a planetary motor. Read on to learn more about these motors.

VPLite

If you’re looking to replace the original VP, the VPLite has a similar output shaft as the original. This means that you can mix and match your original gear sets, including the input and output shafts. You can even mix metal inputs with plastic outputs. Moreover, if you decide to replace the gearbox, you can easily disassemble the entire unit and replace it with a new one without losing any output torque.
Compared to a planetary motor, a spur gear motor uses fewer gears and is therefore cheaper to produce. However, the latter isn’t suitable for high-torque applications. The torque produced by a planetary gearmotor is evenly distributed, which makes it ideal for applications that require higher torque. However, you may have to compromise on the torque output if you’re looking for a lightweight option.
The VersaPlanetary Lite gearbox replaces the aluminum ring gear with a 30% glass-filled nylon gear. This gearbox is available in two sizes, which means you can mix and match parts to get a better gear ratio. The VPLite gearbox also has a female 5mm hex output shaft. You can mix and match different gearboxes and planetary gearboxes for maximum efficiency.
Motor

VersaPlanetary

The VersaPlanetary is a highly versatile planetary motor that can be mounted in a variety of ways. Its unique design includes a removable shaft coupler system that makes it simple to swap out the motor with another. This planetary motor mounts in any position where a CIM motor mounts. Here’s how to assemble the motor. First, remove the hex output shaft from the VersaPlanetary output stage. Its single ring clip holds it in place. You can use a drill press to drill a hole into the output shaft.
After mounting the gearbox, you can then mount the motor. The mounting hardware included with the VersaPlanetary Planetary Motor comes with four 10-32 threaded holes on a two-inch bolt circle. You can use these holes to mount your VersaPlanetary on a CIM motor or a CIM-compatible motor. Once assembled, the VersaPlanetary gearbox has 72 different gear ratios.
The VersaPlanetary gearbox is interchangeable with regular planetary gearboxes. However, it does require additional parts. You can purchase a gearbox without the motor but you’ll need a pinion. The pinion attaches to the shaft of the motor. The gearbox is very sturdy and durable, so you won’t have to worry about it breaking or wearing out.

Self-centering planetary gears

A planetary motor is a simple mechanical device that rotates around a axis, with the planets moving around the shaft in a radial direction. The planets are positioned so that they mesh with both the sun gear and the output gears. The carrier 48 is flexibly connected to the drive shaft and can move depending on the forces exerted by the planet gears. In this way, the planets can always be in the optimal mesh with the output gears and sun gear.
The first step in developing a planetary gear motor is to identify the number of teeth in each planet. The number of teeth should be an integer. The tooth diameters of the planets should mesh with each other and the ring. Typically, the teeth of one planet must mesh with each other, but the spacing between them must be equal or greater than the other. This can be achieved by considering the tooth count of each planet, as well as the spacing between planets.
A second step is to align the planet gears with the output gears. In a planetary motor, self-centering planetary gears must be aligned with both input and output gears to provide maximum torque. For this to be possible, the planet gears must be connected with the output shaft and the input shaft. Similarly, the output shaft should also be able to align with the input gear.
Motor

Encoders

A planetary geared motor is a DC motor with a planetary gearbox. The motor can be used to drive heavy loads and has a ratio of 104:1. The shaft speed is 116rpm when it is unloaded. A planetary gearbox has a low backlash and is often used in applications that need high torque. Planetary Motor encoders can help you keep track of your robot’s position or speed.
They are also able to control motor position and speed with precision. Most of them feature high resolution. A 0.18-degree resolution encoder will give you a minimum of 2000 transitions per rotation between outputs A and B. The encoder is built to industrial standards and has a sturdy gearbox to avoid damage. The encoder’s robust design means it will not stall when the motor reaches its maximum speed.
There are many advantages to a planetary motor encoder. A high-quality one will not lose its position or speed even if it’s subject to shocks. A good quality planetary motor will also last a long time. Planetary motors are great for resale or for your own project. If you’re considering buying a planetary motor, consider this information. It’ll help you decide if a particular model is right for your needs.

Cost

There are several advantages of planetary motors. One of the biggest is their cost, but they can also be used in many different applications. They can be combined with a variety of gearboxes, and are ideal for various types of robots, laboratory automation, and production applications. Planetary gearboxes are available in many different materials, and plastic planetary gearboxes are an economical alternative. Plastic gearboxes reduce noise at higher speeds, and steel input stage gears are available for high torques. A modified lubrication system can help with difficult operating conditions.
In addition to being more durable, planetary motors are much more efficient. They use fewer gears, which lowers the overall cost of production. Depending on the application, a planetary motor can be used to move a heavy object, but is generally less expensive than its counterpart. It is a better choice for situations where the load is relatively low and the motor is not used frequently. If you need a very high torque output, a planetary motor may be the better option.
Planetary gear units are a good choice for applications requiring high precision, high dynamics, and high torque density. They can be designed and built using TwinCAT and TC Motion Designer, and are delivered as complete motor and gear unit assemblies. In a few simple steps, you can calculate the torque required and compare the costs of different planetary gear units. You can then choose the best model for your application. And because planetary gear units are so efficient, they are a great option for high-end industrial applications.
Motor

Applications

There are several different applications of the planetary motor. One such application is in motion control. Planetary gearboxes have many benefits, including high torque, low backlash, and torsional stiffness. They also have an extremely compact design, and can be used for a variety of applications, from rack and pinion drives to delta robotics. In many cases, they are less expensive to manufacture and use than other types of motors.
Another application for planetary gear units is in rotary tables. These machines require high precision and low backlash for their precise positioning. Planetary gears are also necessary for noise reduction, which is a common feature in rotary tables. High precision planetary gears can make the height adjustment of OP tables a breeze. And because they are extremely durable and require low noise, they are a great choice for this application. In this case, the planetary gear is matched with an AM8000 series servomotor, which gives a wide range of choices.
The planetary gear transmission is also widely used in helicopters, automobiles, and marine applications. It is more advanced than a countershaft drive, and is capable of higher torque to weight ratios. Other advantages include its compact design and reduced noise. A key concern in the development of this type of transmission is to minimize vibration. If the output of a planetary gear transmission system is loud, the vibration caused by this type of drive system may be too loud for comfort.

China Good Quality High Torque Low Speed NEMA 8 17 23 Geared Stepper Motor, 42mm 57mm Stepping Motors with Planetary Gearhead     brushless motor	China Good Quality High Torque Low Speed NEMA 8 17 23 Geared Stepper Motor, 42mm 57mm Stepping Motors with Planetary Gearhead     brushless motor
editor by czh 2022-12-17