Tag Archives: 42mm planetary gear motor

China high quality ZD 42mm Three-Step Brush/Brushless Precision Planetary Transmission Gear Motor manufacturer

Product Description

ZD 42mm Three-Step Brush/Brushless Precision Planetary Transmission Gear Motor

Detailed Photos

 

 

Product Parameters

MODEL:Z42BLDPM2425-30S(42ZPM188K)

 

Other Related Products

 

Click Here For More Details

 

Company Profile

 

FAQ

Q: What’re your main products?

A: We currently produce Brushed Dc Motors, Brushed Dc Gear Motors, Planetary Dc Gear Motors, Brushless Dc Motors, Stepper motors, Ac Motors and High Precision Planetary Gear Box etc. You can check the specifications for above motors on our website and you can email us to recommend needed motors per your specification too.

Q: How to select a suitable motor?
A:If you have motor pictures or drawings to show us, or you have detailed specs like voltage, speed, torque, motor size, working mode of the motor, needed lifetime and noise level etc, please do not hesitate to let us know, then we can recommend suitable motor per your request accordingly.

Q: Do you have a customized service for your standard motors?
A: Yes, we can customize per your request for the voltage, speed, torque and shaft size/shape. If you need additional wires/cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.

Q: Do you have an individual design service for motors?
A: Yes, we would like to design motors individually for our customers, but it may need some mold developing cost and design charge. 

Q: What’s your lead time?
A: Generally speaking, our regular standard product will need 15-30days, a bit longer for customized products. But we are very flexible on the lead time, it will depend on the specific orders.

Please contact us if you have detailed requests, thank you !
 

Application: Motor, Electric Cars
Function: Change Drive Torque, Speed Changing
Layout: Transmission
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Three-Step
Customization:
Available

|

Customized Request

Motor

The Basics of a Planetary Motor

A Planetary Motor is a type of gearmotor that uses multiple planetary gears to deliver torque. This system minimizes the chances of failure of individual gears and increases output capacity. Compared to the planetary motor, the spur gear motor is less complex and less expensive. However, a spur gear motor is generally more suitable for applications requiring low torque. This is because each gear is responsible for the entire load, limiting its torque.

Self-centering planetary gears

This self-centering mechanism for a planetary motor is based on a helical arrangement. The helical structure involves a sun-planet, with its crown and slope modified. The gears are mounted on a ring and share the load evenly. The helical arrangement can be either self-centering or self-resonant. This method is suited for both applications.
A helical planetary gear transmission is illustrated in FIG. 1. A helical configuration includes an output shaft 18 and a sun gear 18. The drive shaft extends through an opening in the cover to engage drive pins on the planet carriers. The drive shaft of the planetary gears can be fixed to the helical arrangement or can be removable. The transmission system is symmetrical, allowing the output shaft of the planetary motor to rotate radially in response to the forces acting on the planet gears.
A flexible pin can improve load sharing. This modification may decrease the face load distribution, but increases the (K_Hbeta) parameter. This effect affects the gear rating and life. It is important to understand the effects of flexible pins. It is worth noting that there are several other disadvantages of flexible pins in helical PGSs. The benefits of flexible pins are discussed below.
Using self-centering planetary gears for a helical planetary motor is essential for symmetrical force distribution. These gears ensure the symmetry of force distribution. They can also be used for self-centering applications. Self-centering planetary gears also guarantee the proper force distribution. They are used to drive a planetary motor. The gearhead is made of a ring gear, and the output shaft is supported by two ball bearings. Self-centering planetary gears can handle a high torque input, and can be suited for many applications.
To solve for a planetary gear mechanism, you need to find its pitch curve. The first step is to find the radius of the internal gear ring. A noncircular planetary gear mechanism should be able to satisfy constraints that can be complex and nonlinear. Using a computer, you can solve for these constraints by analyzing the profile of the planetary wheel’s tooth curve.

High torque

Compared to the conventional planetary motors, high-torque planetary motors have a higher output torque and better transmission efficiency. The high-torque planetary motors are designed to withstand large loads and are used in many types of applications, such as medical equipment and miniature consumer electronics. Their compact design makes them suitable for small space-saving applications. In addition, these motors are designed for high-speed operation.
They come with a variety of shaft configurations and have a wide range of price-performance ratios. The FAULHABER planetary gearboxes are made of plastic, resulting in a good price-performance ratio. In addition, plastic input stage gears are used in applications requiring high torques, and steel input stage gears are available for higher speeds. For difficult operating conditions, modified lubrication is available.
Various planetary gear motors are available in different sizes and power levels. Generally, planetary gear motors are made of steel, brass, or plastic, though some use plastic for their gears. Steel-cut gears are the most durable, and are ideal for applications that require a high amount of torque. Similarly, nickel-steel gears are more lubricated and can withstand a high amount of wear.
The output torque of a high-torque planetary gearbox depends on its rated input speed. Industrial-grade high-torque planetary gearboxes are capable of up to 18000 RPM. Their output torque is not higher than 2000 nm. They are also used in machines where a planet is decelerating. Their working temperature ranges between 25 and 100 degrees Celsius. For best results, it is best to choose the right size for the application.
A high-torque planetary gearbox is the most suitable type of high-torque planetary motor. It is important to determine the deceleration ratio before buying one. If there is no product catalog that matches your servo motor, consider buying a close-fitting high-torque planetary gearbox. There are also high-torque planetary gearboxes available for custom-made applications.
Motor

High efficiency

A planetary gearbox is a type of mechanical device that is used for high-torque transmission. This gearbox is made of multiple pairs of gears. Large gears on the output shaft mesh with small gears on the input shaft. The ratio between the big and small gear teeth determines the transmittable torque. High-efficiency planetary gearheads are available for linear motion, axial loads, and sterilizable applications.
The AG2400 high-end gear unit series is ideally matched to Beckhoff’s extensive line of servomotors and gearboxes. Its single-stage and multi-stage transmission ratios are highly flexible and can be matched to different robot types. Its modified lubrication helps it operate in difficult operating conditions. These high-performance gear units are available in a wide range of sizes.
A planetary gear motor can be made of steel, nickel-steel, or brass. In addition to steel, some models use plastic. The planetary gears share work between multiple gears, making it easy to transfer high amounts of power without putting a lot of stress on the gears. The gears in a planetary gear motor are held together by a movable arm. High-efficiency planetary gear motors are more efficient than traditional gearmotors.
While a planetary gear motor can generate torque, it is more efficient and cheaper to produce. The planetary gear system is designed with all gears operating in synchrony, minimizing the chance of a single gear failure. The efficiency of a planetary gearmotor makes it a popular choice for high-torque applications. This type of motor is suitable for many applications, and is less expensive than a standard geared motor.
The planetary gearbox is a combination of a planetary type gearbox and a DC motor. The planetary gearbox is compact, versatile, and efficient, and can be used in a wide range of industrial environments. The planetary gearbox with an HN210 DC motor is used in a 22mm OD, PPH, and ph configuration with voltage operating between 6V and 24V. It is available in many configurations and can be custom-made to meet your application requirements.
Motor

High cost

In general, planetary gearmotors are more expensive than other configurations of gearmotors. This is due to the complexity of their design, which involves the use of a central sun gear and a set of planetary gears which mesh with each other. The entire assembly is enclosed in a larger internal tooth gear. However, planetary motors are more effective for higher load requirements. The cost of planetary motors varies depending on the number of gears and the number of planetary gears in the system.
If you want to build a planetary gearbox, you can purchase a gearbox for the motor. These gearboxes are often available with several ratios, and you can use any one to create a custom ratio. The cost of a gearbox depends on how much power you want to move with the gearbox, and how much gear ratio you need. You can even contact your local FRC team to purchase a gearbox for the motor.
Gearboxes play a major role in determining the efficiency of a planetary gearmotor. The output shafts used for this type of motor are usually made of steel or nickel-steel, while those used in planetary gearboxes are made from brass or plastic. The former is the most durable and is best for applications that require high torque. The latter, however, is more absorbent and is better at holding lubricant.
Using a planetary gearbox will allow you to reduce the input power required for the stepper motor. However, this is not without its downsides. A planetary gearbox can also be replaced with a spare part. A planetary gearbox is inexpensive, and its spare parts are inexpensive. A planetary gearbox has low cost compared to a planetary motor. Its advantages make it more desirable in certain applications.
Another advantage of a planetary gear unit is the ability to handle ultra-low speeds. Using a planetary gearbox allows stepper motors to avoid resonance zones, which can cause them to crawl. In addition, the planetary gear unit allows for safe and efficient cleaning. So, whether you’re considering a planetary gear unit for a particular application, these gear units can help you get exactly what you need.

China high quality ZD 42mm Three-Step Brush/Brushless Precision Planetary Transmission Gear Motor   manufacturer China high quality ZD 42mm Three-Step Brush/Brushless Precision Planetary Transmission Gear Motor   manufacturer
editor by CX 2023-05-23

China Best Sales Factory Wholesale DC Brushed 42mm 12V 24V 48V 10.4W 21.1W 50rpm Electric Planetary Gear Reduction Motor with Encoder High Torque motor engine

Product Description

 

BG 42ZYT DC Brushed Motor 
Environmental Conditions -20ºC~50ºC
Insulation Clase B
Protection class IP44
Noise ≤65dB
Number of phases Single 
Lifespan >1000h

Electrical Specifications
Model RATED LOAD NO LOAD   STALL
 Voltage    Power  

  Speed  

 Torque    Current   Speed    Current   Torque   Current 
V W rpm N.m A rpm A   N.m   A  
BG 42775-1 12 10.4 2430 0.04 1.3 3000 0.4  0.25 6.7
BG 42775-2 24 21.1 3850 0.05 1.25 4500 0.25  0.4 8.3
We can also customize products according to customer requirements.  

 Planetary Gear Motor Technical Data-BG
Ratio 10.2 19.2  26.9  188 264 721 669 1911
NO-load speed 1167 700 437 175 98 87.5 58 36
Rated speed(rpm) 1000 600 375 150 83 75 50 31
Rated torque 0.34 0.65 0.9 5.6 6 6 6 6

Established in 1994, HangZhou BG Motor Factory is a professional manufacturer of brushless DC motors, brushed DC motors, planetary gear motors, worm gear motors, Universal motors and AC motors. We have a plant area of 6000 square meters, multiple patent certificates, and we have the independent design and development capabilities and strong technical force, with an annual output of more than 1 million units. Since the beginning of its establishment, BG motor has focused on the overall solution of motors. We manufacture and design motors, provide professional customized services, respond quickly to customer needs, and actively help customers to solve problems. Our motor products are exported to 20 countries, including the United States, Germany, Italy, the United Kingdom, Poland, Slovenia, Switzerland, Sweden, Singapore, South Korea etc.
Our founder, Mr. Sun, has more than 40 years of experience in motor technology, and our other engineers also have more than 15 years of experience, and 60% of our staff have more than 10 years of experience, and we can assure you that the quality of our motors is top notch.
The products cover AGV, underwater robots, robots, sewing machine industry, automobiles, medical equipment, automatic doors, lifting equipment, industrial equipment and have a wide range of applications.
We strive for CZPT in the quality of each product, and we are only a small and sophisticated manufacturer.
Our vision: Drive the world forward and make life better!

Q:1.What kind of motors can you provide?

A:At present, we mainly produce brushless DC motors, brush DC motors, AC motors, Universal Motors; the power of the motor is less than 5000W, and the diameter of the motor is not more than 200mm;

Q:2.Can you send me a price list?

A:For all of our motors, they are customized based on different requirements like lifetime, noise,voltage,and shaft etc. The price also varies according to annual quantity. So it’s really difficult for us to provide a price list. If you can share your detailed requirements and annual quantity, we’ll see what offer we can provide.

Q:3.Can l get some samples?

A:It depends. If only a few samples for personal use or replacement, I am afraid it’ll be difficult for us to provide because all of our motors are custom made and no stock available if there are no further needs. If just sample testing before the official order and our MOQ,price and other terms are acceptable,we’d love to provide samples.

Q4:Can you provide OEM or ODM service?

A:Yes,OEM and ODM are both available, we have the professional R&D dept which can provide professional solutions for you.

Q5:Can l visit your factory before we place an order?

A:welcome to visit our factory,wear every pleased if we have the chance to know each other more.

Q:6.What’s the lead time for a regular order?

A:For orders, the standard lead time is 15-20 days and this time can be shorter or longer based on the different model,period and quantity.

Application: Universal, Industrial, Household Appliances, Car, Power Tools, Robot Arm
Operating Speed: Low Speed
Excitation Mode: DC
Function: Driving
Casing Protection: Closed Type
Number of Poles: Can Be Choosen
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

Motor

The Basics of a Gear Motor

The basic mechanism behind the gear motor is the principle of conservation of angular momentum. The smaller the gear, the more RPM it covers and the larger the gear, the more torque it produces. The ratio of angular velocity of two gears is called the gear ratio. Moreover, the same principle applies to multiple gears. This means that the direction of rotation of each adjacent gear is always the opposite of the one it is attached to.

Induction worm gear motor

If you’re looking for an electric motor that can deliver high torque, an Induction worm gear motor might be the right choice. This type of motor utilizes a worm gear attached to the motor to rotate a main gear. Because this type of motor is more efficient than other types of motors, it can be used in applications requiring massive reduction ratios, as it is able to provide more torque at a lower speed.
The worm gear motor is designed with a spiral shaft that is set into splines in another gear. The speed at which the worm gear rotates is dependent on the torque produced by the main gear. Induction worm gear motors are best suited for use in low-voltage applications such as electric cars, renewable energy systems, and industrial equipment. They come with a wide range of power-supply options, including twelve-volt, 24-volt, and 36-volt AC power supplies.
These types of motors can be used in many industrial settings, including elevators, airport equipment, food packaging facilities, and more. They also produce less noise than other types of motors, which makes them a popular choice for manufacturers with limited space. The efficiency of worm gearmotors makes them an excellent choice for applications where noise is an issue. Induction worm gear motors can be compact and extremely high-torque.
While the Induction worm gear motor is most widely used in industrial applications, there are other kinds of gearmotors available. Some types are more efficient than others, and some are more expensive than others. For your application, choosing the correct motor and gearbox combination is crucial to achieving the desired result. You’ll find that the Induction worm gear motor is an excellent choice for many applications. The benefits of an Induction worm gear motor can’t be overstated.
The DC gear motor is an excellent choice for high-end industrial applications. This type of gearmotor is smaller and lighter than a standard AC motor and can deliver up to 200 watts of torque. A gear ratio of three to two can be found in these motors, which makes them ideal for a wide range of applications. A high-quality DC gear motor is a great choice for many industrial applications, as they can be highly efficient and provide a high level of reliability.
Electric gear motors are a versatile and widely used type of electric motor. Nevertheless, there are some applications that don’t benefit from them, such as applications with high shaft speed and low torque. Applications such as fan motors, pump and scanning machines are examples of such high-speed and high-torque demands. The most important consideration when choosing a gearmotor is its efficiency. Choosing the right size will ensure the motor runs efficiently at peak efficiency and will last for years.
Motor

Parallel shaft helical gear motor

The FC series parallel shaft helical gearmotor is a compact, lightweight, and high-performance unit that utilizes a parallel shaft structure. Its compact design is complemented by high transmission efficiency and high carrying capacity. The motor’s material is 20CrMnTi alloy steel. The unit comes with either a flanged input or bolt-on feet for installation. Its low noise and compact design make it an ideal choice for a variety of applications.
The helical gears are usually arranged in two rows of one another. Each row contains one or more rows of teeth. The parallel row has the teeth in a helical pattern, while the helical rows are lined up parallelly. In addition to this, the cross helical gears have a point contact design and do not overlap. They can be either parallel or crossed. The helical gear motors can have any number of helical pairs, each with a different pitch circle diameter.
The benefits of the Parallel Shaft Helical Gearbox include high temperature and pressure handling. It is produced by skilled professionals using cutting-edge technology, and is widely recognized for its high performance. It is available in a range of technical specifications and is custom-made to suit individual requirements. These gearboxes are durable and low-noise and feature high reliability. You can expect to save up to 40% of your energy by using them.
The parallel shaft helical gear motors are designed to reduce the speed of a rotating part. The nodular cast iron housing helps make the unit robust in difficult environments, while the precision-machined gears provide quiet, vibration-free operation. These motors are available in double reduction, triple reduction, and quadruple reduction. The capacity ranges from 0.12 kW to 45 kW. You can choose from a wide variety of capacities, depending on the size of your gearing needs.
The SEW-EURODRIVE parallel shaft helical gearmotor is a convenient solution for space-constrained applications. The machine’s modular design allows for easy mounting and a wide range of ambient temperatures. They are ideal for a variety of mechanical applications, including conveyors, augers, and more. If you want a small footprint, the SEW-EURODRIVE parallel shaft helical gear motor is the best solution for you.
The parallel shaft helical gears are advantageous for both high and low speed applications. Parallel helical gears are also suitable for low speed and low duty applications. A good example of a cross-helix gear is the oil pump of an internal combustion engine. Both types of helical gears are highly reliable and offer vibration-free operation. They are more costly than conventional gear motors, but offer more durability and efficiency.
Motor

Helical gear unit

This helical gear unit is designed to operate under a variety of demanding conditions and can be used in a wide range of applications. Designed for long life and high torque density, this gear unit is available in a variety of torques and gear ratios. Its design and construction make it compatible with a wide range of critical mechanical systems. Common applications include conveyors, material handling, steel mills, and paper mills.
Designed for high-performance applications, the Heidrive helical gear unit provides superior performance and value. Its innovative design allows it to function well under a wide range of operating conditions and is highly resistant to damage. These gear motors can be easily combined with a helical gear unit. Their combined power output is 100 Nm, and they have a high efficiency of up to 90%. For more information about the helical gear motor, contact a Heidrive representative.
A helical gear unit can be classified by its reference section in the standard plane or the turning plane. Its center gap is the same as that of a spur gear, and its number of teeth is the same. In addition to this, the helical gear has a low axial thrust, which is another important characteristic. The helical gear unit is more efficient at transferring torque than a spur gear, and it is quieter, too.
These units are designed to handle large loads. Whether you are using them for conveyors, augers, or for any other application that involves high-speed motion, a helical gear unit will deliver maximum performance. A helical gear unit from Flender can handle 400,000 tasks with a high degree of reliability. Its high efficiency and high resistance to load ensures high plant availability. These gear motors are available in a variety of sizes, from single-speed to multi-speed.
PEC geared motors benefit from decades of design experience and high quality materials. They are robust, quiet, and offer excellent performance. They are available in multiple configurations and are dimensionally interchangeable with other major brands. The gear motors are manufactured as modular kits to minimize inventory. They can be fitted with additional components, such as backstops and fans. This makes it easy to customize your gear motors and save money while reducing costs.
Another type of helical gears is the double helical gear. The double helical gear unit has two helical faces with a gap between them. They are better for enclosed gear systems as they provide greater tooth overlap and smoother performance. Compared to double helical gears, they are smaller and more flexible than the Herringbone type. So, if you’re looking for a gear motor, a helical gear unit may be perfect for you.

China Best Sales Factory Wholesale DC Brushed 42mm 12V 24V 48V 10.4W 21.1W 50rpm Electric Planetary Gear Reduction Motor with Encoder High Torque   motor engine	China Best Sales Factory Wholesale DC Brushed 42mm 12V 24V 48V 10.4W 21.1W 50rpm Electric Planetary Gear Reduction Motor with Encoder High Torque   motor engine
editor by CX 2023-04-19

China 4260 Manufacturer 42mm 24V Brushless DC Planetary Gear Motor Planetary Gearhead BLDC Motor motor brushes

Product Description

 

one. Stator dimensions is optional
2. Risk-free, reliable, lower sounds, good starting up, long daily life
3. Robust energy
Rated voltage 5~120V/220~240V-50/60Hz

Typical utilised: Exhaust fan, air purifier, micro-oven, enthusiast, induction cooker, refrigerator, pump, heater, hood oven, blwer, air conditioner, Heater devices, dehumidifiers
Thermal protector with 1 shot fuse or multi shot fuse
 

Typical Industry
Goods for market and commerce makes use of motor  Products for medical appliance motor  
Application
Home appliances motor  Industrial equipment motor  Medical items motor  
Primary Specialized Parameters
Vol.: 12-48V DC
Rated Velocity: 3000-5000RPM
Rated Energy: 30-forty W
Insulation Class: B  F  H
Common application 
Oxygen generator    
Air drier 
Air pump
Compression pump
Radiator fan
Automated bench drill  

 

Common product load performance       
  Type Voltage Variety(V) Rated Voltage (V) Pace (RPM) Recent (A) Speed (RPM) Recent (A) P(W) Max Eff.(%)
BL43203-01 ten-14/DC 12/DC 3200 .2 3200 3.five 30.5 73
BL43303-01 22-26DC 24/DC 3200 .1 3200 1.7 30.five 75
BL43503-01 forty eight-fifty two/DC forty eight/DC 3200 .05 3200 .8 thirty.five 75

ABOUT US

Ritscher group was established up in 2006.we always emphasis on micro-motors for family electrical equipment and market appliance because environment up.at present we have 2 professional micro-motor factories in China  which severally positioned in HangZhou metropolis and HangZhou town.it has an region of twenty five,000 sq. meters plants and more than three hundred workers, yearly output  is 3 million pcs and has 5 million pcs once-a-year generating capacity.right after numerous years development,we experienced constructed a great status in the marketplace and acquired far more and much more customers’  trust in the globe.
We  began from shaded pole motors  at commencing, up to now,our solution  included of shaded pole motors,synchronous motors,stepping motors ,capacitor motors, BLDC motors, DC motors and compressors. Our merchandise  are broadly utilized for making fridges, freezers, micro-wave ovens, air warmers, air exhausters, ventilators,ovens, air filter, therapeutic massage equipment and several other equipments.
As a realiable good quality guaranty,Ritscher has total R&D departement,QC office,producing department,obtain office and many others. has ideal producing tools like Aluminum diecasting, Zinc diecasting, Sheet steel stamping, Plastic injection molding and so on. also check/ detection system like multiplex temp measuring device, functionality parameter inspection gadget, Phenol peptide remedy pinhole tester,Anechoic space etc.
 
Endeavoring to provide the greatest merchandise and support to buyers,we constantly do the most energy to turn out to be an fantastic producer of micro motors.
Ritscher is always inclined to set up sincere organization romantic relationship with friends from all above the planet.
Welcome make contact with with us!
 
Just take CZPT ,appreciate present day life!

Our company FAQ for you

(1) Q: What kind motors you can give?
A:For now,we mainly offer Kitchen area Hood Motor,DC Motor,Gear Motor,Enthusiast Motor Refrigerator Motor,Hair Dryer Motor Blender Motor Mixer Motor,
Shade Pole Motor,Capacitor Motor,BLDC Motor PMDC Motor,Synchronous Motor,Stepping Motor and many others.

(2) Q: Is it attainable to check out your manufacturing unit
A: Positive. But remember to kindly maintain us posted a few days in advance. We need to examine our
timetable to see if we are offered then.

(3) Q: Can I get some samples
A: It depends. If only a couple of samples for personal use or replacement, I am concerned it will
be difficult for us to provide, because all of our motors are personalized made and no inventory
available if there is no further needs. If just sample testing before the formal buy and
our MOQ, price tag and other phrases are suitable, we’d adore to provide samples.

(4) Q: Is there a MOQ for your motors?
A: Yes. The MOQ is amongst a thousand~ten,000pcs for distinct designs right after sample approval.
But it truly is also alright for us to acknowledge smaller heaps like a handful of dozens, hundreds or 1000’s
For the preliminary 3 orders after sample approval.For samples, there is no MOQ need. But the much less the better (like no far more than 5pcs) on condition that the quantity is enough in case any changes essential following initial testing.

 

US $2.5
/ Piece
|
100 Pieces

(Min. Order)

###

Application: Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed: Adjust Speed
Excitation Mode: Excited
Function: Control, Driving
Casing Protection: Protection Type
Number of Poles: 4

###

Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Typical Market
Products for industry and commerce uses motor  Products for medical appliance motor  
Application
Household appliances motor  Industrial equipment motor  Medical products motor  
Main Technical Parameters
Vol.: 12-48V DC
Rated Speed: 3000-5000RPM
Rated Power: 30-40 W
Insulation Class: B  F  H
Typical application 
Oxygen generator    
Air drier 
Air pump
Compression pump
Radiator fan
Automatic bench drill  

###

Typical model load performance       
  Type Voltage Range(V) Rated Voltage (V) Speed (RPM) Current (A) Speed (RPM) Current (A) P(W) Max Eff.(%)
BL43203-01 10-14/DC 12/DC 3200 0.2 3200 3.5 30.5 73
BL43303-01 22-26DC 24/DC 3200 0.1 3200 1.7 30.5 75
BL43503-01 48-52/DC 48/DC 3200 0.05 3200 0.8 30.5 75
US $2.5
/ Piece
|
100 Pieces

(Min. Order)

###

Application: Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed: Adjust Speed
Excitation Mode: Excited
Function: Control, Driving
Casing Protection: Protection Type
Number of Poles: 4

###

Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Typical Market
Products for industry and commerce uses motor  Products for medical appliance motor  
Application
Household appliances motor  Industrial equipment motor  Medical products motor  
Main Technical Parameters
Vol.: 12-48V DC
Rated Speed: 3000-5000RPM
Rated Power: 30-40 W
Insulation Class: B  F  H
Typical application 
Oxygen generator    
Air drier 
Air pump
Compression pump
Radiator fan
Automatic bench drill  

###

Typical model load performance       
  Type Voltage Range(V) Rated Voltage (V) Speed (RPM) Current (A) Speed (RPM) Current (A) P(W) Max Eff.(%)
BL43203-01 10-14/DC 12/DC 3200 0.2 3200 3.5 30.5 73
BL43303-01 22-26DC 24/DC 3200 0.1 3200 1.7 30.5 75
BL43503-01 48-52/DC 48/DC 3200 0.05 3200 0.8 30.5 75

Dynamic Modeling of a Planetary Motor

A planetary gear motor consists of a series of gears rotating in perfect synchrony, allowing them to deliver torque in a higher output capacity than a spur gear motor. Unlike the planetary motor, spur gear motors are simpler to build and cost less, but they are better for applications requiring lower torque output. That is because each gear carries the entire load. The following are some key differences between the two types of gearmotors.

planetary gear system

A planetary gear transmission is a type of gear mechanism that transfers torque from one source to another, usually a rotary motion. Moreover, this type of gear transmission requires dynamic modeling to investigate its durability and reliability. Previous studies included both uncoupled and coupled meshing models for the analysis of planetary gear transmission. The combined model considers both the shaft structural stiffness and the bearing support stiffness. In some applications, the flexible planetary gear may affect the dynamic response of the system.
In a planetary gear device, the axial end surface of the cylindrical portion is rotatable relative to the separating plate. This mechanism retains lubricant. It is also capable of preventing foreign particles from entering the planetary gear system. A planetary gear device is a great choice if your planetary motor’s speed is high. A high-quality planetary gear system can provide a superior performance than conventional systems.
A planetary gear system is a complex mechanism, involving three moving links that are connected to each other through joints. The sun gear acts as an input and the planet gears act as outputs. They rotate about their axes at a ratio determined by the number of teeth on each gear. The sun gear has 24 teeth, while the planet gears have three-quarters that ratio. This ratio makes a planetary motor extremely efficient.
Motor

planetary gear train

To predict the free vibration response of a planetary motor gear train, it is essential to develop a mathematical model for the system. Previously, static and dynamic models were used to study the behavior of planetary motor gear trains. In this study, a dynamic model was developed to investigate the effects of key design parameters on the vibratory response. Key parameters for planetary gear transmissions include the structure stiffness and mesh stiffness, and the mass and location of the shaft and bearing supports.
The design of the planetary motor gear train consists of several stages that can run with variable input speeds. The design of the gear train enables the transmission of high torques by dividing the load across multiple planetary gears. In addition, the planetary gear train has multiple teeth which mesh simultaneously in operation. This design also allows for higher efficiency and transmittable torque. Here are some other advantages of planetary motor gear trains. All these advantages make planetary motor gear trains one of the most popular types of planetary motors.
The compact footprint of planetary gears allows for excellent heat dissipation. High speeds and sustained performances will require lubrication. This lubricant can also reduce noise and vibration. But if these characteristics are not desirable for your application, you can choose a different gear type. Alternatively, if you want to maintain high performance, a planetary motor gear train will be the best choice. So, what are the advantages of planetary motor gears?

planetary gear train with fixed carrier train ratio

The planetary gear train is a common type of transmission in various machines. Its main advantages are high efficiency, compactness, large transmission ratio, and power-to-weight ratio. This type of gear train is a combination of spur gears, single-helical gears, and herringbone gears. Herringbone planetary gears have lower axial force and high load carrying capacity. Herringbone planetary gears are commonly used in heavy machinery and transmissions of large vehicles.
To use a planetary gear train with a fixed carrier train ratio, the first and second planets must be in a carrier position. The first planet is rotated so that its teeth mesh with the sun’s. The second planet, however, cannot rotate. It must be in a carrier position so that it can mesh with the sun. This requires a high degree of precision, so the planetary gear train is usually made of multiple sets. A little analysis will simplify this design.
The planetary gear train is made up of three components. The outer ring gear is supported by a ring gear. Each gear is positioned at a specific angle relative to one another. This allows the gears to rotate at a fixed rate while transferring the motion. This design is also popular in bicycles and other small vehicles. If the planetary gear train has several stages, multiple ring gears may be shared. A stationary ring gear is also used in pencil sharpener mechanisms. Planet gears are extended into cylindrical cutters. The ring gear is stationary and the planet gears rotate around a sun axis. In the case of this design, the outer ring gear will have a -3/2 planet gear ratio.
Motor

planetary gear train with zero helix angle

The torque distribution in a planetary gear is skewed, and this will drastically reduce the load carrying capacity of a needle bearing, and therefore the life of the bearing. To better understand how this can affect a gear train, we will examine two studies conducted on the load distribution of a planetary gear with a zero helix angle. The first study was done with a highly specialized program from the bearing manufacturer INA/FAG. The red line represents the load distribution along a needle roller in a zero helix gear, while the green line corresponds to the same distribution of loads in a 15 degree helix angle gear.
Another method for determining a gear’s helix angle is to consider the ratio of the sun and planet gears. While the sun gear is normally on the input side, the planet gears are on the output side. The sun gear is stationary. The two gears are in engagement with a ring gear that rotates 45 degrees clockwise. Both gears are attached to pins that support the planet gears. In the figure below, you can see the tangential and axial gear mesh forces on a planetary gear train.
Another method used for calculating power loss in a planetary gear train is the use of an auto transmission. This type of gear provides balanced performance in both power efficiency and load capacity. Despite the complexities, this method provides a more accurate analysis of how the helix angle affects power loss in a planetary gear train. If you’re interested in reducing the power loss of a planetary gear train, read on!

planetary gear train with spur gears

A planetary gearset is a type of mechanical drive system that uses spur gears that move in opposite directions within a plane. Spur gears are one of the more basic types of gears, as they don’t require any specialty cuts or angles to work. Instead, spur gears use a complex tooth shape to determine where the teeth will make contact. This in turn, will determine the amount of power, torque, and speed they can produce.
A two-stage planetary gear train with spur gears is also possible to run at variable input speeds. For such a setup, a mathematical model of the gear train is developed. Simulation of the dynamic behaviour highlights the non-stationary effects, and the results are in good agreement with the experimental data. As the ratio of spur gears to spur gears is not constant, it is called a dedendum.
A planetary gear train with spur gears is a type of epicyclic gear train. In this case, spur gears run between gears that contain both internal and external teeth. The circumferential motion of the spur gears is analogous to the rotation of planets in the solar system. There are four main components of a planetary gear train. The planet gear is positioned inside the sun gear and rotates to transfer motion to the sun gear. The planet gears are mounted on a joint carrier that is connected to the output shaft.
Motor

planetary gear train with helical gears

A planetary gear train with helical teeth is an extremely powerful transmission system that can provide high levels of power density. Helical gears are used to increase efficiency by providing a more efficient alternative to conventional worm gears. This type of transmission has the potential to improve the overall performance of a system, and its benefits extend far beyond the power density. But what makes this transmission system so appealing? What are the key factors to consider when designing this type of transmission system?
The most basic planetary train consists of the sun gear, planet gear, and ring gear elements. The number of planets varies, but the basic structure of planetary gears is similar. A simple planetary geartrain has the sun gear driving a carrier assembly. The number of planets can be as low as two or as high as six. A planetary gear train has a low mass inertia and is compact and reliable.
The mesh phase properties of a planetary gear train are particularly important in designing the profiles. Various parameters such as mesh phase difference and tooth profile modifications must be studied in depth in order to fully understand the dynamic characteristics of a PGT. These factors, together with others, determine the helical gears’ performance. It is therefore essential to understand the mesh phase of a planetary gear train to design it effectively.

China 4260 Manufacturer 42mm 24V Brushless DC Planetary Gear Motor Planetary Gearhead BLDC Motor     motor brushesChina 4260 Manufacturer 42mm 24V Brushless DC Planetary Gear Motor Planetary Gearhead BLDC Motor     motor brushes
editor by czh 2023-01-28

China 42mm Brush / Brushless / Stepper Gear Motor with Metal Planetary Gearbox Low Noise with Best Sales

Product Description

We are a factory specialized in metal parts hardware & metal gearbox geared motor through powder metallurgy process .We services with ODM/OEM gearbox design and development , gearmotors manufacture.
A planetary gear set is made up of 3 types of gears , a sun gear , planet gears and a ring gear . The sun gear at high speed is located at the center of the gears , and transmits torque to the planet gears which are typically mounted on the moveable carrier .The planet gears around the central axis rotation ,mesh with the sun gear and an outer ring gear . As all the planet carriers turns , it delivers low-speed, high-torque output .
Low-Cost, High-Efficiency Planetary Gear Systems
Planetary gearboxes are especially efficient, they are suitable for continuous, intermittent and alternating operation as well as for clockwise and anticlockwise rotation. Their use results in an increased performance of the entire drive train since the choice of the right gearbox allows for a smaller motor and thereby increases the economic efficiency of the entire drive train.
planetary gearbox with optimized helical gearset teeth was developed for highly demanding applications. These gearbox is perfect for applications ranging from basic machinedesign to printing, packaging, and robotics.
Features:
The highest dynamics in multiple axis systems
Unrivaled price-performance ratio
Low heat generation at highest speeds
For any mounting position
Lifetime lubrication for maintenance-free operation
Precise gearing

Description:
Product Name : 36mm planet gearbox with DC brushed motors  high torque geared motor / Speed reducer / steel gearbox
Gearbox Type: Planetary
Material: Steel 

No-load Speed: 3-1,375 rpm

Rated Load Speed: 3-1,280 rpm
 

No-load Current: 300-325 mA

Rated Load Current: 1,679-1,684 mA

Gear Ratio : 5:1 , 10:1 , 20:1 , 25:1 , 30:1 , 40:1 , 50:1 , 60:1 ,70:1…100:1…  optional
Gearbox diameter : 6mm , 8mm , 12mm , 16mm , 22mm , 24mm ,28mm, 32mm ,36mm, 38mm , 42mm ……
12-24V available .

Planetary Gearbox advantages:

  • Easy and functional flange, foot, or shaft-mounting design
  • High torque transmitted
  • Extended range of transmission ratios and output speeds available

Application:
monitor,automatic vending machine,automatic cruise control,door lock actuator, retractable rearview mirror, meters, optic axis control device, head light beam level adjuster,printers,conditioning damper actuator,Car tail gate electric putter,tooth brush,vibrator, sanitary ware,coffee machine,Sweeping robot,etc.

Welcome send drawings for OEM service .

 

Workshop

US $5.98
/ Piece
|
2,000 Pieces

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Three-Step

###

Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
US $5.98
/ Piece
|
2,000 Pieces

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Three-Step

###

Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

The Basics of a Planetary Motor

A Planetary Motor is a type of gearmotor that uses multiple planetary gears to deliver torque. This system minimizes the chances of failure of individual gears and increases output capacity. Compared to the planetary motor, the spur gear motor is less complex and less expensive. However, a spur gear motor is generally more suitable for applications requiring low torque. This is because each gear is responsible for the entire load, limiting its torque.

Self-centering planetary gears

This self-centering mechanism for a planetary motor is based on a helical arrangement. The helical structure involves a sun-planet, with its crown and slope modified. The gears are mounted on a ring and share the load evenly. The helical arrangement can be either self-centering or self-resonant. This method is suited for both applications.
A helical planetary gear transmission is illustrated in FIG. 1. A helical configuration includes an output shaft 18 and a sun gear 18. The drive shaft extends through an opening in the cover to engage drive pins on the planet carriers. The drive shaft of the planetary gears can be fixed to the helical arrangement or can be removable. The transmission system is symmetrical, allowing the output shaft of the planetary motor to rotate radially in response to the forces acting on the planet gears.
A flexible pin can improve load sharing. This modification may decrease the face load distribution, but increases the (K_Hbeta) parameter. This effect affects the gear rating and life. It is important to understand the effects of flexible pins. It is worth noting that there are several other disadvantages of flexible pins in helical PGSs. The benefits of flexible pins are discussed below.
Using self-centering planetary gears for a helical planetary motor is essential for symmetrical force distribution. These gears ensure the symmetry of force distribution. They can also be used for self-centering applications. Self-centering planetary gears also guarantee the proper force distribution. They are used to drive a planetary motor. The gearhead is made of a ring gear, and the output shaft is supported by two ball bearings. Self-centering planetary gears can handle a high torque input, and can be suited for many applications.
To solve for a planetary gear mechanism, you need to find its pitch curve. The first step is to find the radius of the internal gear ring. A noncircular planetary gear mechanism should be able to satisfy constraints that can be complex and nonlinear. Using a computer, you can solve for these constraints by analyzing the profile of the planetary wheel’s tooth curve.
Motor

High torque

Compared to the conventional planetary motors, high-torque planetary motors have a higher output torque and better transmission efficiency. The high-torque planetary motors are designed to withstand large loads and are used in many types of applications, such as medical equipment and miniature consumer electronics. Their compact design makes them suitable for small space-saving applications. In addition, these motors are designed for high-speed operation.
They come with a variety of shaft configurations and have a wide range of price-performance ratios. The FAULHABER planetary gearboxes are made of plastic, resulting in a good price-performance ratio. In addition, plastic input stage gears are used in applications requiring high torques, and steel input stage gears are available for higher speeds. For difficult operating conditions, modified lubrication is available.
Various planetary gear motors are available in different sizes and power levels. Generally, planetary gear motors are made of steel, brass, or plastic, though some use plastic for their gears. Steel-cut gears are the most durable, and are ideal for applications that require a high amount of torque. Similarly, nickel-steel gears are more lubricated and can withstand a high amount of wear.
The output torque of a high-torque planetary gearbox depends on its rated input speed. Industrial-grade high-torque planetary gearboxes are capable of up to 18000 RPM. Their output torque is not higher than 2000 nm. They are also used in machines where a planet is decelerating. Their working temperature ranges between 25 and 100 degrees Celsius. For best results, it is best to choose the right size for the application.
A high-torque planetary gearbox is the most suitable type of high-torque planetary motor. It is important to determine the deceleration ratio before buying one. If there is no product catalog that matches your servo motor, consider buying a close-fitting high-torque planetary gearbox. There are also high-torque planetary gearboxes available for custom-made applications.
Motor

High efficiency

A planetary gearbox is a type of mechanical device that is used for high-torque transmission. This gearbox is made of multiple pairs of gears. Large gears on the output shaft mesh with small gears on the input shaft. The ratio between the big and small gear teeth determines the transmittable torque. High-efficiency planetary gearheads are available for linear motion, axial loads, and sterilizable applications.
The AG2400 high-end gear unit series is ideally matched to Beckhoff’s extensive line of servomotors and gearboxes. Its single-stage and multi-stage transmission ratios are highly flexible and can be matched to different robot types. Its modified lubrication helps it operate in difficult operating conditions. These high-performance gear units are available in a wide range of sizes.
A planetary gear motor can be made of steel, nickel-steel, or brass. In addition to steel, some models use plastic. The planetary gears share work between multiple gears, making it easy to transfer high amounts of power without putting a lot of stress on the gears. The gears in a planetary gear motor are held together by a movable arm. High-efficiency planetary gear motors are more efficient than traditional gearmotors.
While a planetary gear motor can generate torque, it is more efficient and cheaper to produce. The planetary gear system is designed with all gears operating in synchrony, minimizing the chance of a single gear failure. The efficiency of a planetary gearmotor makes it a popular choice for high-torque applications. This type of motor is suitable for many applications, and is less expensive than a standard geared motor.
The planetary gearbox is a combination of a planetary type gearbox and a DC motor. The planetary gearbox is compact, versatile, and efficient, and can be used in a wide range of industrial environments. The planetary gearbox with an HN210 DC motor is used in a 22mm OD, PPH, and ph configuration with voltage operating between 6V and 24V. It is available in many configurations and can be custom-made to meet your application requirements.
Motor

High cost

In general, planetary gearmotors are more expensive than other configurations of gearmotors. This is due to the complexity of their design, which involves the use of a central sun gear and a set of planetary gears which mesh with each other. The entire assembly is enclosed in a larger internal tooth gear. However, planetary motors are more effective for higher load requirements. The cost of planetary motors varies depending on the number of gears and the number of planetary gears in the system.
If you want to build a planetary gearbox, you can purchase a gearbox for the motor. These gearboxes are often available with several ratios, and you can use any one to create a custom ratio. The cost of a gearbox depends on how much power you want to move with the gearbox, and how much gear ratio you need. You can even contact your local FRC team to purchase a gearbox for the motor.
Gearboxes play a major role in determining the efficiency of a planetary gearmotor. The output shafts used for this type of motor are usually made of steel or nickel-steel, while those used in planetary gearboxes are made from brass or plastic. The former is the most durable and is best for applications that require high torque. The latter, however, is more absorbent and is better at holding lubricant.
Using a planetary gearbox will allow you to reduce the input power required for the stepper motor. However, this is not without its downsides. A planetary gearbox can also be replaced with a spare part. A planetary gearbox is inexpensive, and its spare parts are inexpensive. A planetary gearbox has low cost compared to a planetary motor. Its advantages make it more desirable in certain applications.
Another advantage of a planetary gear unit is the ability to handle ultra-low speeds. Using a planetary gearbox allows stepper motors to avoid resonance zones, which can cause them to crawl. In addition, the planetary gear unit allows for safe and efficient cleaning. So, whether you’re considering a planetary gear unit for a particular application, these gear units can help you get exactly what you need.

China 42mm Brush / Brushless / Stepper Gear Motor with Metal Planetary Gearbox Low Noise     with Best SalesChina 42mm Brush / Brushless / Stepper Gear Motor with Metal Planetary Gearbox Low Noise     with Best Sales
editor by czh 2022-11-27

China 42mm Diameter Long Life Micro Brushless 12V/24V Pm DC Planetary Gear Motor motor driver

Product Description

42mm Diameter Long Life Micro Brushless 12V/24V PM DC Planetary Gear Motor

Product overview:

Planetary gearheads feature extremely high power transmission with a very short design. The modular design and the scaled stages provide the basis for a customer-specific solution. Metal components make use in a wide range of applications possible.At the same time they have a very compact form, low weight, and excellent efficiency. Self-centering planet gears ensure a symmetrical force distribution. The ring gear also forms the housing of the gearbox. The gearbox output shaft is supported in 2 ball bearings so that it can withstand high axial and radial loads. The gearboxes are customized, e.g. for use in especially low ambient temperatures, or as high-power gearboxes with reinforced output shafts, or with special lubricants for very long service life.

DC brush & coreless planetary gearmotor/          Φ28mm
Helical gears in 1st stage,low backlash,ceramic pins are optional  ,,,  
Specifications of DC motor/
1 Nominal voltage/        12V DC 24V DC
2 No load current /     300 mA 61 mA
3 No load speed/ 7430 RPM 7700 RPM
4 Rated current/     3364 mA 1682 mA
5 Rated speed/ 6597RPM 6831RPM
6 Rated torque/ 51.38 mNm 49.88mNm
7 Stall current/        27630 mA 14424 mA
8 Stall torque/   458 mNm 442.1 mNm
9 Max. efficiency/      81.0% 84.0%
10 Ambient temperature/         -20°C~+65°C
11 Output bearing/ Sleeve bearing
12 Type of brush/      Carbon brush
Specifications of gearmotor under 12VDC/12VDC
Stage Ratio Rated current Rated speed Rated torque Max.momentary current Max.momentary torque Weight
1 3.7:1 3400 mA 1783 RPM 161.8 mNm 5300 mA 242.7 mNm 254 g
1 4.3:1 3400 mA 1534 RPM 187.2 mNm 5300 mA 280.8 mNm 254 g
1 5.2:1 3400 mA 1731 RPM 226.3 mNm 5300 mA 339.4 mNm 254 g
2 16:1 3400 mA 412 RPM 594 mNm 5300 mA 891  mNm 277 g
2 19:1 3400 mA 347 RPM 705 mNm 5300 mA 1058 mNm 277 g
2 27:1 3400 mA 244 RPM 1000 mNm 5300 mA 1500 mNm 277 g
3 59:1 3400 mA 112 RPM 1862 mNm 5300 mA 2793 mNm 300 g
3 79:1 3400 mA 83 RPM 2493 mNm 5300 mA 3740 mNm 300 g
3 99:1 3400 mA 67 RPM 3124 mNm 5300 mA 4686 mNm 300 g
3 139:1 3400 mA 47 RPM 4386 mNm 5300 mA 6580 mNm 300 g
4 264:1 3150 mA 25 RPM 6000 mNm 4535 mA 9000 mNm 325 g
4 337:1 2520 mA 20 RPM 6000 mNm 3620 mA 9000 mNm 325 g
4 516:1 1750 mA 14 RPM 6000 mNm 2472 mA 9000 mNm 325 g
4 721:1 1350 mA 10 RPM 6000 mNm 2400 mA 9000 mNm 325 g
Specifications of gearmotor under 24VDC/24VDC
Stage Ratio Rated current Rated speed Rated torque Max.momentary current Max.momentary torque Weight
1 3.7:1 1700 mA 1844 RPM 157.1 mNm 2580 mA 235.6 mNm 254 g
1 4.3:1 1700 mA 1594 RPM 181.7 mNm 2580 mA 272.6 mNm 254 g
1 5.2:1 1700 mA 1318 RPM 219.7 mNm 2580 mA 329.6 mNm 254 g
2 16:1 1700 mA 427 RPM 279    mNm 2580 mA 418.5 mNm 277 g
2 19:1 1700 mA 360 RPM 684.7 mNm 2580 mA 1571 mNm 277 g
2 27:1 1700 mA 253 RPM 973    mNm 2580 mA 1460 mNm 277 g
3 59:1 1700 mA 116 RPM 1807 mNm 2580 mA 2711 mNm 300 g
3 79:1 1700 mA 86 RPM 2420 mNm 2580 mA 3630 mNm 300 g
3 99:1 1700 mA 69 RPM 3033 mNm 2580 mA 4550 mNm 300 g
3 139:1 1700 mA 49 RPM 4258 mNm 2580 mA 6387 mNm 300 g
4 264:1 1530 mA 26 RPM 6000 mNm 2200 mA 9000 mNm 325 g
4 337:1 1220 mA 21 RPM 6000 mNm 1750 mA 9000 mNm 325 g
4 516:1 820 mA 14RPM 6000 mNm 1200 mA 9000 mNm 325 g
4 721:1 610 mA 10 RPM 6000 mNm 900  mA 9000 mNm 325 g
                 
Pict

 
          Gearbox stages Length of gearbox X Length of gearmotor  L
            1 28.7 92.7
            2 35.7 99.7
            3 42.7 106.7
            4 49.7 113.7

Typical applications:
 

  1. ATM in bank,Robot,Door-lock,Auto shutter, USB fan,Slot machine,Money detector, Coin refund devices
  2. Currency count machine, Towel dispensers, Automatic doors,Peritoneal machine
  3. Automatic TV rack, Office equipemt ,Household appliances,Automatic, medical screwdriver, robotic arms
  4. Lab stirrer, Cosmetology instrument, Medical devices, Hairdressing equipment,Cameras,Health-care articles

Miscellanea:
 

  1. Please contact us to get detailed specifications and drawings for the geared motor you’re looking for.
  2. We are CZPT to design and produce the geared motor you specified.(OEM & ODM).
  3. Please visit us at silent to get more information.

US $7.7-12
/ Piece
|
1,000 Pieces

(Min. Order)

###

Operating Speed: Low Speed
Power Source: Permanent Magnet
Function: Control
Casing Protection: Explosion-Proof Type
Number of Poles: 4
Structure: Electromagnetic

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

DC brush & coreless planetary gearmotor/          Φ28mm
Helical gears in 1st stage,low backlash,ceramic pins are optional  ,,,  
Specifications of DC motor/
1 Nominal voltage/        12V DC 24V DC
2 No load current /     300 mA 61 mA
3 No load speed/ 7430 RPM 7700 RPM
4 Rated current/     3364 mA 1682 mA
5 Rated speed/ 6597RPM 6831RPM
6 Rated torque/ 51.38 mNm 49.88mNm
7 Stall current/        27630 mA 14424 mA
8 Stall torque/   458 mNm 442.1 mNm
9 Max. efficiency/      81.0% 84.0%
10 Ambient temperature/         -20°C~+65°C
11 Output bearing/ Sleeve bearing
12 Type of brush/      Carbon brush
Specifications of gearmotor under 12VDC/12VDC
Stage Ratio Rated current Rated speed Rated torque Max.momentary current Max.momentary torque Weight
1 3.7:1 3400 mA 1783 RPM 161.8 mNm 5300 mA 242.7 mNm 254 g
1 4.3:1 3400 mA 1534 RPM 187.2 mNm 5300 mA 280.8 mNm 254 g
1 5.2:1 3400 mA 1731 RPM 226.3 mNm 5300 mA 339.4 mNm 254 g
2 16:1 3400 mA 412 RPM 594 mNm 5300 mA 891  mNm 277 g
2 19:1 3400 mA 347 RPM 705 mNm 5300 mA 1058 mNm 277 g
2 27:1 3400 mA 244 RPM 1000 mNm 5300 mA 1500 mNm 277 g
3 59:1 3400 mA 112 RPM 1862 mNm 5300 mA 2793 mNm 300 g
3 79:1 3400 mA 83 RPM 2493 mNm 5300 mA 3740 mNm 300 g
3 99:1 3400 mA 67 RPM 3124 mNm 5300 mA 4686 mNm 300 g
3 139:1 3400 mA 47 RPM 4386 mNm 5300 mA 6580 mNm 300 g
4 264:1 3150 mA 25 RPM 6000 mNm 4535 mA 9000 mNm 325 g
4 337:1 2520 mA 20 RPM 6000 mNm 3620 mA 9000 mNm 325 g
4 516:1 1750 mA 14 RPM 6000 mNm 2472 mA 9000 mNm 325 g
4 721:1 1350 mA 10 RPM 6000 mNm 2400 mA 9000 mNm 325 g
Specifications of gearmotor under 24VDC/24VDC
Stage Ratio Rated current Rated speed Rated torque Max.momentary current Max.momentary torque Weight
1 3.7:1 1700 mA 1844 RPM 157.1 mNm 2580 mA 235.6 mNm 254 g
1 4.3:1 1700 mA 1594 RPM 181.7 mNm 2580 mA 272.6 mNm 254 g
1 5.2:1 1700 mA 1318 RPM 219.7 mNm 2580 mA 329.6 mNm 254 g
2 16:1 1700 mA 427 RPM 279    mNm 2580 mA 418.5 mNm 277 g
2 19:1 1700 mA 360 RPM 684.7 mNm 2580 mA 1027 mNm 277 g
2 27:1 1700 mA 253 RPM 973    mNm 2580 mA 1460 mNm 277 g
3 59:1 1700 mA 116 RPM 1807 mNm 2580 mA 2711 mNm 300 g
3 79:1 1700 mA 86 RPM 2420 mNm 2580 mA 3630 mNm 300 g
3 99:1 1700 mA 69 RPM 3033 mNm 2580 mA 4550 mNm 300 g
3 139:1 1700 mA 49 RPM 4258 mNm 2580 mA 6387 mNm 300 g
4 264:1 1530 mA 26 RPM 6000 mNm 2200 mA 9000 mNm 325 g
4 337:1 1220 mA 21 RPM 6000 mNm 1750 mA 9000 mNm 325 g
4 516:1 820 mA 14RPM 6000 mNm 1200 mA 9000 mNm 325 g
4 721:1 610 mA 10 RPM 6000 mNm 900  mA 9000 mNm 325 g
                 
Pict

 
US $7.7-12
/ Piece
|
1,000 Pieces

(Min. Order)

###

Operating Speed: Low Speed
Power Source: Permanent Magnet
Function: Control
Casing Protection: Explosion-Proof Type
Number of Poles: 4
Structure: Electromagnetic

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

DC brush & coreless planetary gearmotor/          Φ28mm
Helical gears in 1st stage,low backlash,ceramic pins are optional  ,,,  
Specifications of DC motor/
1 Nominal voltage/        12V DC 24V DC
2 No load current /     300 mA 61 mA
3 No load speed/ 7430 RPM 7700 RPM
4 Rated current/     3364 mA 1682 mA
5 Rated speed/ 6597RPM 6831RPM
6 Rated torque/ 51.38 mNm 49.88mNm
7 Stall current/        27630 mA 14424 mA
8 Stall torque/   458 mNm 442.1 mNm
9 Max. efficiency/      81.0% 84.0%
10 Ambient temperature/         -20°C~+65°C
11 Output bearing/ Sleeve bearing
12 Type of brush/      Carbon brush
Specifications of gearmotor under 12VDC/12VDC
Stage Ratio Rated current Rated speed Rated torque Max.momentary current Max.momentary torque Weight
1 3.7:1 3400 mA 1783 RPM 161.8 mNm 5300 mA 242.7 mNm 254 g
1 4.3:1 3400 mA 1534 RPM 187.2 mNm 5300 mA 280.8 mNm 254 g
1 5.2:1 3400 mA 1731 RPM 226.3 mNm 5300 mA 339.4 mNm 254 g
2 16:1 3400 mA 412 RPM 594 mNm 5300 mA 891  mNm 277 g
2 19:1 3400 mA 347 RPM 705 mNm 5300 mA 1058 mNm 277 g
2 27:1 3400 mA 244 RPM 1000 mNm 5300 mA 1500 mNm 277 g
3 59:1 3400 mA 112 RPM 1862 mNm 5300 mA 2793 mNm 300 g
3 79:1 3400 mA 83 RPM 2493 mNm 5300 mA 3740 mNm 300 g
3 99:1 3400 mA 67 RPM 3124 mNm 5300 mA 4686 mNm 300 g
3 139:1 3400 mA 47 RPM 4386 mNm 5300 mA 6580 mNm 300 g
4 264:1 3150 mA 25 RPM 6000 mNm 4535 mA 9000 mNm 325 g
4 337:1 2520 mA 20 RPM 6000 mNm 3620 mA 9000 mNm 325 g
4 516:1 1750 mA 14 RPM 6000 mNm 2472 mA 9000 mNm 325 g
4 721:1 1350 mA 10 RPM 6000 mNm 2400 mA 9000 mNm 325 g
Specifications of gearmotor under 24VDC/24VDC
Stage Ratio Rated current Rated speed Rated torque Max.momentary current Max.momentary torque Weight
1 3.7:1 1700 mA 1844 RPM 157.1 mNm 2580 mA 235.6 mNm 254 g
1 4.3:1 1700 mA 1594 RPM 181.7 mNm 2580 mA 272.6 mNm 254 g
1 5.2:1 1700 mA 1318 RPM 219.7 mNm 2580 mA 329.6 mNm 254 g
2 16:1 1700 mA 427 RPM 279    mNm 2580 mA 418.5 mNm 277 g
2 19:1 1700 mA 360 RPM 684.7 mNm 2580 mA 1027 mNm 277 g
2 27:1 1700 mA 253 RPM 973    mNm 2580 mA 1460 mNm 277 g
3 59:1 1700 mA 116 RPM 1807 mNm 2580 mA 2711 mNm 300 g
3 79:1 1700 mA 86 RPM 2420 mNm 2580 mA 3630 mNm 300 g
3 99:1 1700 mA 69 RPM 3033 mNm 2580 mA 4550 mNm 300 g
3 139:1 1700 mA 49 RPM 4258 mNm 2580 mA 6387 mNm 300 g
4 264:1 1530 mA 26 RPM 6000 mNm 2200 mA 9000 mNm 325 g
4 337:1 1220 mA 21 RPM 6000 mNm 1750 mA 9000 mNm 325 g
4 516:1 820 mA 14RPM 6000 mNm 1200 mA 9000 mNm 325 g
4 721:1 610 mA 10 RPM 6000 mNm 900  mA 9000 mNm 325 g
                 
Pict

 

The Basics of a Gear Motor

The basic mechanism behind the gear motor is the principle of conservation of angular momentum. The smaller the gear, the more RPM it covers and the larger the gear, the more torque it produces. The ratio of angular velocity of two gears is called the gear ratio. Moreover, the same principle applies to multiple gears. This means that the direction of rotation of each adjacent gear is always the opposite of the one it is attached to.
Motor

Induction worm gear motor

If you’re looking for an electric motor that can deliver high torque, an Induction worm gear motor might be the right choice. This type of motor utilizes a worm gear attached to the motor to rotate a main gear. Because this type of motor is more efficient than other types of motors, it can be used in applications requiring massive reduction ratios, as it is able to provide more torque at a lower speed.
The worm gear motor is designed with a spiral shaft that is set into splines in another gear. The speed at which the worm gear rotates is dependent on the torque produced by the main gear. Induction worm gear motors are best suited for use in low-voltage applications such as electric cars, renewable energy systems, and industrial equipment. They come with a wide range of power-supply options, including twelve-volt, 24-volt, and 36-volt AC power supplies.
These types of motors can be used in many industrial settings, including elevators, airport equipment, food packaging facilities, and more. They also produce less noise than other types of motors, which makes them a popular choice for manufacturers with limited space. The efficiency of worm gearmotors makes them an excellent choice for applications where noise is an issue. Induction worm gear motors can be compact and extremely high-torque.
While the Induction worm gear motor is most widely used in industrial applications, there are other kinds of gearmotors available. Some types are more efficient than others, and some are more expensive than others. For your application, choosing the correct motor and gearbox combination is crucial to achieving the desired result. You’ll find that the Induction worm gear motor is an excellent choice for many applications. The benefits of an Induction worm gear motor can’t be overstated.
The DC gear motor is an excellent choice for high-end industrial applications. This type of gearmotor is smaller and lighter than a standard AC motor and can deliver up to 200 watts of torque. A gear ratio of three to two can be found in these motors, which makes them ideal for a wide range of applications. A high-quality DC gear motor is a great choice for many industrial applications, as they can be highly efficient and provide a high level of reliability.
Electric gear motors are a versatile and widely used type of electric motor. Nevertheless, there are some applications that don’t benefit from them, such as applications with high shaft speed and low torque. Applications such as fan motors, pump and scanning machines are examples of such high-speed and high-torque demands. The most important consideration when choosing a gearmotor is its efficiency. Choosing the right size will ensure the motor runs efficiently at peak efficiency and will last for years.
Motor

Parallel shaft helical gear motor

The FC series parallel shaft helical gearmotor is a compact, lightweight, and high-performance unit that utilizes a parallel shaft structure. Its compact design is complemented by high transmission efficiency and high carrying capacity. The motor’s material is 20CrMnTi alloy steel. The unit comes with either a flanged input or bolt-on feet for installation. Its low noise and compact design make it an ideal choice for a variety of applications.
The helical gears are usually arranged in two rows of one another. Each row contains one or more rows of teeth. The parallel row has the teeth in a helical pattern, while the helical rows are lined up parallelly. In addition to this, the cross helical gears have a point contact design and do not overlap. They can be either parallel or crossed. The helical gear motors can have any number of helical pairs, each with a different pitch circle diameter.
The benefits of the Parallel Shaft Helical Gearbox include high temperature and pressure handling. It is produced by skilled professionals using cutting-edge technology, and is widely recognized for its high performance. It is available in a range of technical specifications and is custom-made to suit individual requirements. These gearboxes are durable and low-noise and feature high reliability. You can expect to save up to 40% of your energy by using them.
The parallel shaft helical gear motors are designed to reduce the speed of a rotating part. The nodular cast iron housing helps make the unit robust in difficult environments, while the precision-machined gears provide quiet, vibration-free operation. These motors are available in double reduction, triple reduction, and quadruple reduction. The capacity ranges from 0.12 kW to 45 kW. You can choose from a wide variety of capacities, depending on the size of your gearing needs.
The SEW-EURODRIVE parallel shaft helical gearmotor is a convenient solution for space-constrained applications. The machine’s modular design allows for easy mounting and a wide range of ambient temperatures. They are ideal for a variety of mechanical applications, including conveyors, augers, and more. If you want a small footprint, the SEW-EURODRIVE parallel shaft helical gear motor is the best solution for you.
The parallel shaft helical gears are advantageous for both high and low speed applications. Parallel helical gears are also suitable for low speed and low duty applications. A good example of a cross-helix gear is the oil pump of an internal combustion engine. Both types of helical gears are highly reliable and offer vibration-free operation. They are more costly than conventional gear motors, but offer more durability and efficiency.
Motor

Helical gear unit

This helical gear unit is designed to operate under a variety of demanding conditions and can be used in a wide range of applications. Designed for long life and high torque density, this gear unit is available in a variety of torques and gear ratios. Its design and construction make it compatible with a wide range of critical mechanical systems. Common applications include conveyors, material handling, steel mills, and paper mills.
Designed for high-performance applications, the Heidrive helical gear unit provides superior performance and value. Its innovative design allows it to function well under a wide range of operating conditions and is highly resistant to damage. These gear motors can be easily combined with a helical gear unit. Their combined power output is 100 Nm, and they have a high efficiency of up to 90%. For more information about the helical gear motor, contact a Heidrive representative.
A helical gear unit can be classified by its reference section in the standard plane or the turning plane. Its center gap is the same as that of a spur gear, and its number of teeth is the same. In addition to this, the helical gear has a low axial thrust, which is another important characteristic. The helical gear unit is more efficient at transferring torque than a spur gear, and it is quieter, too.
These units are designed to handle large loads. Whether you are using them for conveyors, augers, or for any other application that involves high-speed motion, a helical gear unit will deliver maximum performance. A helical gear unit from Flender can handle 400,000 tasks with a high degree of reliability. Its high efficiency and high resistance to load ensures high plant availability. These gear motors are available in a variety of sizes, from single-speed to multi-speed.
PEC geared motors benefit from decades of design experience and high quality materials. They are robust, quiet, and offer excellent performance. They are available in multiple configurations and are dimensionally interchangeable with other major brands. The gear motors are manufactured as modular kits to minimize inventory. They can be fitted with additional components, such as backstops and fans. This makes it easy to customize your gear motors and save money while reducing costs.
Another type of helical gears is the double helical gear. The double helical gear unit has two helical faces with a gap between them. They are better for enclosed gear systems as they provide greater tooth overlap and smoother performance. Compared to double helical gears, they are smaller and more flexible than the Herringbone type. So, if you’re looking for a gear motor, a helical gear unit may be perfect for you.

China 42mm Diameter Long Life Micro Brushless 12V/24V Pm DC Planetary Gear Motor     motor driver	China 42mm Diameter Long Life Micro Brushless 12V/24V Pm DC Planetary Gear Motor     motor driver
editor by czh 2022-11-24