one.Model:
HBSL -2500PL HBSL -3000PL
HBSL -4000PL HBSL -6000PL
two.Dimension of products:
3200mm×1650mm×800mm 4500mm×11350mm×700mm
3900mm×2000mm×1300mm 3300mm×1800mm×900mm
3.Areas of software
Cutting strip, aluminum plate, stainless metal plate, and so on
4.Merchandise Introduction
The automation creation line is designed and designed according to the perform required and the on-website working setting.Via the control of the robot movement controller, it can understand the process of automated manufacturing this kind of as computerized layering, automated material using, computerized content feeding, automatic reducing and automatic conveying and can finish the Whole procedure computerized manufacturing,It can efficiently assure item quality, increase production performance and decrease creation value.The whole program has a very good operating interface, straightforward to use.
five.Specification
| Plate Materials | (Stainless metal) Carbon Metal aluminium plate |
|
| Greatest feeding plate thickness | mm | six |
| Maximum workpiece weight | Kg | three hundred |
| Optimum feeding plate dimensions | mm | 4000×1500 |
| Minimum feeding plate measurement | mm | 2500×1250 |
6.Functional description
Step1: The forklift will move the uncooked resources to the cellular platform, electric feeding to the greedy manipulator station.
Step 2: The automated feeder makes use of the vacuum suction cup to grab the material, pneumatic elevate and servo feed to the nc plate shearing feeder station to feed the material to the feeding desk.
Step 3: The CNC shearing plate feeder will automatically align the material in the left and proper directions, and the pneumatic clamp will drive CZPT to clamp the plate (instantly determine the origin), and proceed to wander to the shearing station of the shearing equipment.
Step 4: The plate shearing device and the shearing plate feeder synchronously reduce the plate with fixed measurement and higher precision
Phase 5: The nc feeder returns to the commencing position. The computerized feeder has picked up and operate the resources to the feeder for the 2nd cycle feeding and reducing.
Action 6: The electric conveyor delivers the finished product to the stacker for stacking
Stage seven: When the materials reaches the limit height, the item plate shall be removed by the crane or forklift.
7.Composition and traits
·Raw materials system
The efficient supporting dimensions of the substance platform is 2500*2500, and the effective bearing capacity is 10 tons
·Automatic feeding component
one.The automated feeder adopts the door lifting system (the highest plate weight is about 300KG) to make sure the lifting security.Part of automatic feeder adopts pneumatic lift, vacuum pump and vacuum suction cup to seize materials, very good balance, high value performance.
2.The energy component is driven by servomotor, substantial precision rack and pinion transmission, linear sq. rail positioning, making sure large load and substantial balance.
nc feeder component
The base bracket of heavy obligation feeder is composed of welded composite frame of tube plate, with smooth floor, smooth and straightforward, and the bottom frame is altered freely by adjusting bolt up and down, which is handy for versatile set up and has the advantages of very good balance.
The longitudinal moving shaft is located by the specific linear square rail, and it is machined by the bearing steel fine grinding, quenched and tempered earlier mentioned sixty two levels, which has the benefits of sleek and put on-resistant, guaranteeing the precision and substantial bearing capacity.
The servo motor adopts the newest ASIC chip as the main computing device, and the motor push adopts the most current intelligent power module IPM.It has a collection of rewards, such as large integration, modest volume, rapidly influence pace, ideal security perform and substantial trustworthiness, which is most suitable for the cooperation of the equipment.
management section
CPU manage element: the management center composed of ipc control circuit, Lcd exhibit, proximity swap and other parts of the equipment is also the main element.It has the advantages of innovative structure and easy operation.
The mechanical system of the feeding technique is made by 3-dimensional strong style software program.The mechanical structure is flexible, light and effortless to manage.In accordance to the requirements of the feeding system to the control system, the open standard motion management architecture of Personal computer is adopted to build an open, portable and extensible intelligent handle technique.
The device adopts the approach of mechanical design and style, combining with electrical handle technique style, combining hardware style with application style, and combining theoretical investigation with simulation experiment,Right after satisfactory results are obtained, they shall be used to apply.
