NEMA17 Open up Loop Stepping Motor with Integrated Driver
Novotech’s stepper driver represents the highest degree in domestic.,with 32-bit DSP technology, parameter car adjustment perform, automated optimization of functioning parameters for distinct motors, to maximize motor performance. Developed-in Micro-sub-engineering, in the reduced micro-action problems, the motor can run smoothly, temperature rise and noise are thirty% to fifty% reduce than traditional driver,and the high velocity torque increases twenty%.
Model Xihu (West Lake) Dis.
Motor type | 42IO03 | 42IO06 | 42IO08 |
Holding torque | .3N•M | .68N•M | .8N•M |
Motor current | one.0A | 1.5A | two.0A |
Driver combined with motor | Free combination, can be split drive, or integrate drive | ||
Step angle / motor pole pair | 1.8°/50 pairs pole | ||
CZPTmmended application | Installation volume is limited, running smoothly, low heat | ||
Operation voltage | 12-32Vdc,typical voltage 24Vdc | ||
Overvoltage protection | 38V±2V | ||
Voltage control method | 32-bit DSP control technology | ||
Pulse limit frequency | 500KHz(factory default 200KHz) | ||
Protection | overcurrent, overvoltage and undervoltage alarm | ||
Input signal | Pulse, direction and enable signal are single-end signal input,interface level is 5 Vdc, other levels need to connect external current limiting resistor. |
||
Subdivision | Default 1600 / rev, through the DIP switch or debugging software to set the subdivision (200-51200) |
Subdivision Environment
Step/Rev. | SW1 | SW2 | SW3 |
De4fault[four hundred] | ON | ON | ON |
800 | OFF | ON | ON |
1600 | ON | OFF | ON |
3200 | OFF | OFF | ON |
4000 | ON | ON | OFF |
5000 | OFF | ON | OFF |
6400 | ON | OFF | OFF |
12800 | OFF | OFF | OFF |
Existing setting
Output peak current | Output RMS current | SW1 | SW2 | SW3 |
Default 1.5A[PK] | ON | ON | ON | |
.7A | .50A | OFF | ON | ON |
1.0A | .71A | ON | OFF | ON |
1.2A | .85A | OFF | OFF | ON |
1.5A | one.00A | ON | ON | OFF |
one.8A | one.28A | OFF | ON | OFF |
2.0A | one.42A | ON | OFF | OFF |
2.2A | 1.58A | OFF | OFF | OFF |
Observe : All above is typically utilized, and we can personalize in accordance to your request or pick the suitable model for you, please inform us pursuing parameters: current, voltage, holding torque, physique duration,the application spot.
Application
Our merchandise are commonly used in 3d and inject printers, CNC routers, Engraving Equipment, Phase Lights Handle, Stability Surveillance, Video Gear, CZPT workstation, Carving Machine, Office CZPT,Intelligent Toy, Electronic Managed CZPT,Analytical and Health-related Instruments, Textile Tools, Embroidery Machine, Precision Telescope Positioning Techniques, Substantial Speed Dome Camera,Robotic and other automatic gear.
Packaging and shipping
one.Outer packing: CZPT export carton with necessary transport marks
two.Interior packing: Watertight packing with shock absorbing EPE and cardboard surrounded
three.As per the customers needs
Our service
1.Working time : 8:00 a.m – 10:00 p.m .Any queries, remember to inform us freely, we will be reply you asap.
two.Lead time : For samples, 2 to five times will be Ok. For mass creation, the direct time depend on the portions you want.
three.Warrantity time period : 18 months and Lifestyle-extended maintenance provider for the merchandise.
4.We take merchandise personalize.
FAQ
Q1: How to choose the suitable stepper or servo motor?
A1: There are serveral crucial objects: dimensions, length, keeping torque, voltage, current and so forth.Right after affirm them and told us, we can decide on the ideal one for you.
Q2: Any other techniques to finalize the design?
A2: Sure, you can send out us the design you are using, we can help you uncover the suitable a single.
Q3:How to promise the Top quality of CZPT Components?
A3: We have the built-in method for industrial parts quality manage. We have IQC (incoming quality control), IPQCS (in procedure top quality manage segment), FQC (closing quality management) and OQC (out-going quality control) to handle every single process of industrial components prodution.
This autumn:What is actually the Edge of Your Elements for Business Products?
A4:one.The edge of our products is the competitive prices, quick shipping and delivery and higher high quality. Our
employees are liable-oriented, helpful-oriented,and diligent-oriented. Our goods are highlighted by strict tolerance, clean end and long support time.
2.Prior to we send out the merchandise,we check them a lot more than 3 instances.
Speak to