China High Efficiency Hybrid Stepper Motor with Planetary Gearbox – NEMA 2.3″ – 56 mm Square with Good quality

Merchandise Description

Motor Specialized Specification

Flange

NEMA 2.3″ – 56 mm square

Bipolar holding torque

200.00 [Ncm] min.

Phase angle

one.8 [°] ± 5 [%]

Passi giro

200

Rated voltage

.50 [Volt]

Rated existing

four.20 [A/ph]

Period resistance

15 [Ohm] ± ten [%]

Phase inductance

twenty [mH] ± 20 [%]

Rotor inertia

480 [g.cm²]

Wires variety

four wires for bipolar relationship

Wires output

Direct wires output

Ambient temperature

-twenty [°C] ~ +40 [°C]

Temperature rise

80 [K]

Humidity

15 [%] ~ ninety [%]

Insulation resistance

100 [Mohm] min.

Dielectric energy

five hundred [VAC 1 Minute]

Insulation class

Class B, 130°

Course defense

IP30

Max. shaft radial load

seventy five [N]

Max. shaft axial load

fifteen [N]

Depth

77.thirty [mm]

Shaft

Double shaft

Dimensions H x L x W

56.4 [mm] x 56.4 [mm] x 147.3 [mm]

Bodyweight

two.1 [Kg.]

Gearbox kind

Planetary

Lubrication

grease (everlasting lubrification)

Stacks amount

2

Gearbox reduction ratio

one : 30

Max output torque

60. [Nm]

Operational temperature

-thirty [°C] ~ +40 [°C]

Fat

.7 [Kg.]

Company Profile

Taking advantage of the proactive weather of the 70s, in 1977 the engineer Felice Caldi, who experienced often been a passionate builder and inventor, founded an innovative business, running internationally in the subject of computer software for industrial machinery.
Since then, this tiny firm dependent in Lodi has enjoyed continuous successes associated to revolutionary merchandise and chopping edge “greatest in course” technologies in the discipline of industrial automation, as verified by the many patents filed for the duration of the many years as properly as the important awards offered to it by the Chamber of Commerce of Milan and of the Lombardy Region.
    The firm, thanks to its successes in excess of time, has developed significantly, increasing its sales network abroad and opening another business in China to control the sales stream in the Asian industry. 
    At any time attentive to the dynamics and requirements of the automation market place, constantly evolving and continually searching for technological innovation, At any time Elettronica has been CZPT to reply to all the technological difficulties that have arisen over the many years, delivering solutions CZPT to make its customer’s devices a lot more and far more doing and hugely competitive.
    And it is specifically to underline the value and the uniqueness of every solitary client that we design, with care and commitment, extremely customised automation remedies, that are CZPT to properly meet any ask for, the two concerning software program and components.
    Our staff of mechatronic engineers can indeed customise the application with specially made firmware, and it can also adapt the motor by customising, for example, the length of the cables or the diameter of the crankshaft and the IP protection degree, all strictly dependent on the customer’s specialized specs.

US $50-120
/ Piece
|
1 Piece

(Min. Order)

###

Application: Laser Cutting and Scanner
Speed: Low Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Driving
Number of Poles: 2

###

Customization:

###

Flange
NEMA 2.3" – 56 mm square
Bipolar holding torque
200.00 [Ncm] min.
Step angle
1.8 [°] ± 5 [%]
Passi giro
200
Rated voltage
0.50 [Volt]
Rated current
4.20 [A/ph]
Phase resistance
15 [Ohm] ± 10 [%]
Phase inductance
20 [mH] ± 20 [%]
Rotor inertia
480 [g.cm²]
Wires number
4 wires for bipolar connection
Wires output
Lead wires output
Ambient temperature
-20 [°C] ~ +40 [°C]
Temperature rise
80 [K]
Humidity
15 [%] ~ 90 [%]
Insulation resistance
100 [Mohm] min.
Dielectric strength
500 [VAC 1 Minute]
Insulation class
Class B, 130°
Class protection
IP30
Max. shaft radial load
75 [N]
Max. shaft axial load
15 [N]
Depth
77.30 [mm]
Shaft
Double shaft
Dimensions H x L x W
56.4 [mm] x 56.4 [mm] x 147.3 [mm]
Weight
2.1 [Kg.]
Gearbox type
Planetary
Lubrication
grease (permanent lubrification)
Stacks number
2
Gearbox reduction ratio
1 : 30
Max output torque
60.0 [Nm]
Operational temperature
-30 [°C] ~ +40 [°C]
Weight
0.7 [Kg.]
US $50-120
/ Piece
|
1 Piece

(Min. Order)

###

Application: Laser Cutting and Scanner
Speed: Low Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Driving
Number of Poles: 2

###

Customization:

###

Flange
NEMA 2.3" – 56 mm square
Bipolar holding torque
200.00 [Ncm] min.
Step angle
1.8 [°] ± 5 [%]
Passi giro
200
Rated voltage
0.50 [Volt]
Rated current
4.20 [A/ph]
Phase resistance
15 [Ohm] ± 10 [%]
Phase inductance
20 [mH] ± 20 [%]
Rotor inertia
480 [g.cm²]
Wires number
4 wires for bipolar connection
Wires output
Lead wires output
Ambient temperature
-20 [°C] ~ +40 [°C]
Temperature rise
80 [K]
Humidity
15 [%] ~ 90 [%]
Insulation resistance
100 [Mohm] min.
Dielectric strength
500 [VAC 1 Minute]
Insulation class
Class B, 130°
Class protection
IP30
Max. shaft radial load
75 [N]
Max. shaft axial load
15 [N]
Depth
77.30 [mm]
Shaft
Double shaft
Dimensions H x L x W
56.4 [mm] x 56.4 [mm] x 147.3 [mm]
Weight
2.1 [Kg.]
Gearbox type
Planetary
Lubrication
grease (permanent lubrification)
Stacks number
2
Gearbox reduction ratio
1 : 30
Max output torque
60.0 [Nm]
Operational temperature
-30 [°C] ~ +40 [°C]
Weight
0.7 [Kg.]

How to Select a Gear Motor

A gearmotor is an electrical machine that transfers energy from one place to another. There are many types of gearmotors. This article will discuss the types of gearmotors, including Angular geared motors, Planetary gearboxes, Hydraulic gear motors, and Croise motors. In addition to its uses, gearmotors have many different characteristics. In addition, each type has distinct advantages and disadvantages. Listed below are a few tips on selecting a gearmotor.

Angular geared motors

Angular geared motors are the optimum drive element for applications where torques, forces, and motions need to be transferred at an angle. Compared to other types of geared motors, these have few moving parts, a compact design, and a long life. Angular geared motors are also highly efficient in travel drive applications. In addition to their durability, they have a low maintenance requirement and are highly corrosion-resistant.
Helical worm geared motors are a low-cost solution for drives that employ angular geared motors. They combine a worm gear stage and helical input stage to offer higher efficiency than pure worm geared motors. This drive solution is highly reliable and noise-free. Angular geared motors are often used in applications where noise is an issue, and helical worm geared motors are particularly quiet.
The gear ratio of an angular geared motor depends on the ratio between its input and output shaft. A high-quality helical geared motor has a relatively low mechanical noise level, and can be installed in almost any space. The torque of a helical geared motor can be measured by using frequency measurement equipment. The energy efficiency of angular geared motors is one of the most important factors when choosing a motor. Its symmetrical arrangement also allows it to operate in low-speed environments.
When selecting the right angular geared motor, it is important to keep in mind that increased torque will lead to poor output performance. Once a gear motor reaches its stall torque, it will no longer function properly. This makes it important to consult a performance curve to choose the appropriate motor. Most DC motor manufacturers are more than happy to provide these to customers upon request. Angular geared motors are more expensive than conventional worm gear motors.
Motor

Planetary gearboxes

Planetary gearboxes are used in industrial machinery to generate higher torque and power density. There are three main types of planetary gearboxes: double stage, triple stage, and multistage. The central sun gear transfers torque to a group of planetary gears, while the outer ring and spindle provide drive to the motor. The design of planetary gearboxes delivers up to 97% of the power input.
The compact size of planetary gears results in excellent heat dissipation. In some applications, lubrication is necessary to improve durability. Nevertheless, if you are looking for high speed transmission, you should consider the additional features, such as low noise, corrosion resistance, and construction. Some constructors are better than others. Some are quick to respond, while others are unable to ship their products in a timely fashion.
The main benefit of a planetary gearbox is its compact design. Its lightweight design makes it easy to install, and the efficiency of planetary gearboxes is up to 0.98%. Another benefit of planetary gearboxes is their high torque capacity. These gearboxes are also able to work in applications with limited space. Most modern automatic transmissions in the automotive industry use planetary gears.
In addition to being low in cost, planetary gearboxes are a great choice for many applications. Neugart offers both compact and right angle versions. The right angle design offers a high power-to-weight ratio, making it ideal for applications where torque is needed to be transmitted in reverse mode. So if you’re looking for an efficient way to move heavy machinery around, planetary gearboxes can be a great choice.
Another advantage of planetary gearboxes is their ability to be easily and rapidly changed from one application to another. Since planetary gears are designed to be flexible, you don’t have to buy new ones if you need to change gear ratios. You can also use planetary gears in different industries and save on safety stock by sharing common parts. These gears are able to withstand high shock loads and demanding conditions.
Motor

Hydraulic gear motors

Hydraulic gear motors are driven by oil that is pumped into a gear box and causes the gears to rotate. This method of energy production is quiet and inexpensive. The main drawbacks of hydraulic gear motors are that they are noisy and inefficient at low speeds. The other two types of hydraulic motors are piston and vane-type hydraulic motors. The following are some common benefits of hydraulic gear motors.
A hydraulic gear motor is composed of two gears – a driven gear and an idler. The driven gear is attached to the output shaft via a key. High-pressure oil flows into the housing between the gear tips and the motor housing, and the oil then exits through an outlet port. Unlike a conventional gear motor, the gears mesh to prevent the oil from flowing backward. As a result, they are an excellent choice for agricultural and industrial applications.
The most common hydraulic gear motors feature a gerotor and a drive gear. These gears mesh with a larger gear to produce rotation. There are also three basic variations of gear motors: roller-gerotor, gerotor, and differential. The latter produces higher torque and less friction than the previous two. These differences make it difficult to choose which type is the best for your needs. A high-performance gear motor will last longer than an ordinary one.
Radial piston hydraulic motors operate in the opposite direction to the reciprocating shaft of an electric gearmotor. They have nine pistons arranged around a common center line. Fluid pressure causes the pistons to reciprocate, and when they are stationary, the pistons push the fluid out and move back in. Because of the high pressure created by the fluid, they can rotate at speeds up to 25,000RPM. In addition, hydraulic gear motors are highly efficient, allowing them to be used in a wide range of industrial and commercial applications.
Hydraulic gear motors complement hydraulic pumps and motors. They are also available in reversible models. To choose the right hydraulic motor for your project, take time to gather all the necessary information about the installation process. Some types require specialized expertise or complicated installation. Also, there are some differences between closed and open-loop hydraulic motors. Make sure to discuss the options with a professional before you make a decision.
Motor

Croise motors

There are many advantages to choosing a Croise gear motor. It is highly compact, with less weight and space than standard motors. Its right-angle shaft and worm gear provide smooth, quiet operation. A silent-type brake ensures no metallic sound during operation. It also offers excellent positioning accuracy and shock resistance. This is why this motor is ideal for high-frequency applications. Let’s take a closer look.
A properly matched gearmotor will provide maximum torque output in a specified period. Its maximum developing torque is typically the rated output torque. A one-twelfth-horsepower (1/8 horsepower) motor can meet torque requirements of six inch-pounds, without exceeding its breakdown rating. This lower-cost unit allows for production variations and allows the customer to use a less powerful motor. Croise gear motors are available in a variety of styles.

China High Efficiency Hybrid Stepper Motor with Planetary Gearbox - NEMA 2.3China High Efficiency Hybrid Stepper Motor with Planetary Gearbox - NEMA 2.3
editor by czh 2023-01-16