4 station Servo Motor and Driver Bench CNC Lathe Equipment CK6432A
A. Main features
1. The base of the machine is made of cast iron which is heavy enough and of good
rigidity and stability.
two. independent spindle, stepless speed regulation, with lower noise and high
standard machining precision, is an environmental- protective machine.
three. The spindle is the highrotate speed and sophisticated bearing, with smooth surface.
The extra size diameter of the spindle bore isφ60mm while the diameter of chuck
4. High cost performance: the 36’s performance with the 32’s performance.
B. CZPT Configuration and Requirements
two. 3-jaw Chuck
3. CZPTal 4-station Resource Provider
four. Guide Tail-inventory
five. Computerized Lubrication Program Cooling Program Lighting Method
|Max. swim over bed||Φ360mm|
|Max. swim over carriage||Φ150mm|
|Max. length of work piece||450mm/700mm|
|Range of spindle speed||150-2500rpm|
|Taper of spindle bore||MT6|
|Stations of tool carrier||4/six/8 or gang type tool carrier|
|Max size of tool post||20mm×20mm|
|Min. setting unit of motor||(Z) long 0.001mm,
(X) cross 0.001mm
|Moving speed of post||(Z) long 8 m/min,
(X) cross 4 m/min
|Taper of tailstock quill||MT4|
|Max. range of tailstock quill||100mm|
|Packing size(length ×width ×height)||1600/1850*a hundred*550mm|