high pressureMotorDuring use, the temperature of the motor is too high due to some reasons. Today, the motor staff will briefly share the reasons for you:

(1) Operation without safety regulations, for example, short-term and intermittent high-voltage motor companies cannot run through long-term development, so high-voltage motors must operate according to regulations.Frequency conversion speed motorA general term for motors driven by frequency converters.In fact, the motor designed for the frequency converter is a special frequency conversion motor. The motor can achieve different speeds and torques under the drive of the frequency converter to adapt to the changes in the demand of the load.The motor is an electromagnetic device that realizes the conversion or transmission of electric energy according to the law of electromagnetic induction.Explosion-proof motorsA type of motor that can be used in flammable and explosive plants, and it does not generate sparks during operation.Explosion-proof motors are mainly used in coal mines, oil and gas, petrochemical and chemical industries.In addition, it is also widely used in sectors such as textiles, metallurgy, city gas, transportation, grain and oil processing, papermaking, and medicine.

(2) The main pole winding is open circuit.The working winding can be inspected with inspection lights. If the breaking point is when a winding passes through the outside, it can be reconnected and wrapped with insulation; if the breaking point is inside the winding structure, it should be removed and rewinded in time.

(3) The high-voltage control motor is overloaded for long-term work.When the high-voltage motor is overloaded, the current exceeds the rated current, which will affect the overheating of the high-voltage motor in our country.At this time, start to adjust the load again.

(4) The main pole winding is open circuit.The breaking point is divided into two different situations: the internal and external environments of the enterprise: if the external development of the winding needs to be re-wrapped and insulated, it should be removed and re-wound when it is internal.

(5) The direction of rotation of the oblique blade fan is improper and does not cooperate with the high-voltage motor.The diagonal fan should be adjusted to match the high-voltage motor.

(6) Insufficient ventilation.If the air volume, wind speed, and insufficient of the blower, the internal heat of the high-voltage control motor company cannot be discharged in time and overheated, and an appropriate ventilation technology equipment should be replaced